Quantum SNC 5100 Manual de instrucciones

Release Notes

6-00997-10 Rev A

ADIC, Scalar, and SNC are registered trademarks of Advanced Digital Information

Corporation. All other product, company, or service names mentioned herein are the property

of their respective owners.

Product: SNC® 5100 Firmware v4.45.18

Date: May 2006

Contents

Purpose of this Release

This release provides Firmware v4.45.18 for the SNC 5100. The SNC 5100 is used with the Scalar® 1000

and the Scalar 10K.

Resolved Issues

This release of Firmware v4.45.18 is based on Firmware 4.45.17. Issues resolved by Firmware 4.45.18

include the following:

Page Topic

1 Purpose of this Release

1 Resolved Issues

4 Documentation

Change

Request

Number

Description

56424 SNC does not return Reservation Conflict on Mode Sense command.

56886 Host loses SNC and drives after cable pull test.

57118 SNC 5101 in LIP Login loop with 4.45.18 build 1 does not work correctly.

4.45.17

55738 Upgrade QLogic Microcode to 3.03.19

55193 SDLT320 Bug Check causes SNC to hang.

54527 SNC 510X incorrectly identifies GBIC devices.

52968 Watchdog timer required to identify and recover 510x hang.

52257 WRITE command with zero transfer length not processed correctly.

2© May 2006, ADIC

50483 Vendor Unique ASC/ASCQ clash with libraries.

50287 QLogic debug dump procedure improvement.

50136 ResultFlags not reported for all cases of scsintTapeWriteCDBSent

48777 HPUX ioscan sees ghost devices when invoked against an SNC with VPS enabled.

49427 scsiRescan can hang the CLI.

42933 SCSI device info doesn't show up in Dell SNC Manager Immediately with SNC fw

4.50.03

42000 Drive Dump files have bytes swapped and are unreadable by IBM TOWN Tool.

40947 vpsMapShow should be added to 5k firmware supportDump.

39745 SNC is returning invalid data together with sense data for an invalid lun command.

36296 CLI help command does not display vpsHelp and sfmHelp in the list.

24904 Upgrade QLogic MicroCode to Version 3.03.18

4.45.16

41999 Drive Dump files have bytes swapped and are unreadable by IBM TOWN Tool.

41469 The reserveShow command was not displaying the entire port name for an HPUX

host.

41457 Sony SDX-700C Drive does not respond to AMC refresh.

41238 SCSI Timeout values incorrect for tape read and write.

40488 SCSI command timeout values not conformant to IBM LTO-x Specifications.

40466 Command Flow Logging: Every playback allocates new copy buffer and does not free

if playback interrupted.

39723 IBM Changer ULT3583-TL not in changer device list.

39587 SCSI Over IP: “No Device 6.14.21” message is displayed on SNC when an inquiry

command is send to an invalid device.

39534 Need to properly show serial numbers of targets in the mapShowDatabase output

39388 SNC 4000 not properly logging in to McData switch, which prevents the host from

discovering the Scalar 24 .

38542 uaQueue sending old UAs to host after PLOGI event.

38186 Drive dump was failing on the SNC 5101 and SNC 4000.

37913 CFL was throwing an exception when the log wrapped.

37811 mkRelease doesn’t stop if build component is unsuccessful.

37359 Add paCommandFlowLogEnabled variable to SANMgr MIB.

37237 When testing Enhanced Data Streaming, memory that was allocated by dsStart was

not released after dsStop.

Change

Request

Number

Description

37231 CFL was not using the type field to determine if the log entry was owned by SOIP2.

36626 If there was no memory for a playback copy buffer, CFL was not printing an error

message.

36615 The setTimeHost command does not clear input string prior to new input

39587 SCSI Over IP: “No Device 6.14.21” message is displayed on SNC when an inquiry

command is send to an invalid device.

39534 Need to properly show serial numbers of targets in the mapShowDatabase output

39388 SNC 4000 not properly logging in to McData switch, which prevents the host from

discovering the Scalar 24 .

38542 uaQueue sending old UAs to host after PLOGI event.

38186 Drive dump was failing on the SNC 5101 and SNC 4000.

37913 CFL was throwing an exception when the log wrapped.

37811 mkRelease doesn’t stop if build component is unsuccessful.

37359 Add paCommandFlowLogEnabled variable to SANMgr MIB.

37237 When testing Enhanced Data Streaming, memory that was allocated by dsStart was

not released after dsStop.

37231 CFL was not using the type field to determine if the log entry was owned by SOIP2.

36626 If there was no memory for a playback copy buffer, CFL was not printing an error

message.

36615 The setTimeHost command does not clear input string prior to new input

36295 snmpSet error on AMC View Event Log with viewing level =0 (All Events).

36216 Command Flow Logging: Events for failed medium changer are not available if

changer doesn’t respond when SCSI Channel is rescanned.

36157 When testing Enhanced Data Streaming, the test report was displaying MBPS

instead of the number of Tape Writes completed.

36156 When testing Enhanced Data Streaming using two Fibre Channel ports concurrently

and with the SNC in Target mode, tape test errors were recorded.

36085 When the copy test tool or serverless backup sends an XCOPY command, the

Command Flow Logging (CFL) feature was not displaying a completion status.

36075 Request to pull SNC command logs using AMC interface.

35664 Want ability to reset a specified SCSI bus from the CLI and SNMP.

Change

Request

Number

Description

4© May 2006, ADIC

Documentation

These related documents are currently available for the SNC 5100:

Document Number Document Title

6-00676-03 SNC Firmware 4 User’s Guide

6-00020-02 SNC 5100 for the Scalar 1000 and 10K User Guide

Tabla de contenidos

Otros manuales de Almacenamiento de Quantum

Quantum

Quantum StorNext QD7000 Manual de usuario

Quantum

Quantum Superloader 3 Manual de instrucciones

Quantum

Quantum F2000 Manual de usuario

Quantum

Quantum StorNext QD7000 Manual de instalación y operación

Quantum

Quantum StorNext QS1200 Manual de usuario

Quantum

Quantum StorNext QD6000 Manual de usuario

Quantum

Quantum ActiveScale P100E3 Instrucciones de instalación

Quantum

Quantum P4000 Series Instrucciones de instalación y funcionamiento

Quantum

Quantum Scalar i40 Instrucciones de funcionamiento y seguridad

Quantum

Quantum DXi4700 Manual de instalación y operación

Quantum

Quantum DXi V1000 Instrucciones de instalación

Quantum

Quantum QDFLD25-***MUH1I Series Manual de usuario

Quantum

Quantum PX500 Series Manual de instrucciones

Quantum

Quantum FIREBALL PLUS AS 10.2 Manual de usuario

Quantum

Quantum StorNext QM1200 Manual de usuario

Quantum

Quantum Scalar i40 Manual de usuario

Quantum

Quantum DXi6701 Manual técnico

Quantum

Quantum Q2000 Manual de usuario

Quantum

Quantum StorNext QD6000 Manual de usuario

Quantum

Quantum Scalar i40 Instrucciones de funcionamiento y seguridad

Quantum

Quantum P2000 Series Manual de usuario

Quantum

Quantum Scalar 1000 Manual de instrucciones

Quantum

Quantum ATL M1500 Manual de usuario

Quantum

Quantum P1000 Series Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario