ProLights STARKBLADE8 Manual de usuario
MANUALE UTENTE
USER MANUAL
IT - EN
MOVING HEAD
STARKBLADE8
STARKBLADE8
2
All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be
reproduced in any form or by any means for any commercial use.
In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the
characteristics stated in this instruction manual at any time and without prior notice.
All revisions and updates are available in the ‘manuals’section on site www.musiclights.it
REV.03-04/18 - FW V1.2.00
1
STARKBLADE8
Packing content • STARKBLADE8
• Mount bracket
• User manual
TABLE OF CONTENTS Safety
General instructions
Warnings and installation precautions
1 Introduction
1. 1 Description
1. 2 Technical specications
1. 3 Operating elements and connections
2 Installation
2. 1 Mounting
3 Functions and settings
3. 1 Operation
3. 2 Basic
3. 3 Menu structure
3. 4 Linking
3. 5 DMX mode
3. 6 DMX conguration
3. 7 DMX addressing
3. 8 DMX control
3. 9 Wireless control settings
3. 10 Display settings
3. 11 Special functions
3. 12 Fixture settings
3. 13 Lamp settings
3. 14 Fixture information
3. 15 Operation in automatic mode
3. 16 Slave Receive mode
3. 17 Scenes Record mode
3. 18 Music mode
3. 19 Sensitivity microphone
3. 20 Connection of the DMX line
3. 21 Construction of the DMX termination
4 Maintenance
4. 1 Maintenance and cleaning the unit
4. 2 Fuse replacement
4. 3 Trouble shooting
2
2
3
3
5
6
7
7
8
10
10
10
11
12
15
15
16
16
17
17
18
19
19
20
20
21
21
22
22
23
STARKBLADE8
2
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
SAFETY
General instruction
• The products referred to in this manual conform to the European Community Directives and are there-
fore marked with .
• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make any modications on the unit not described in this instruction manual, otherwise you will
risk an electric shock.
• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
• The connection to the main network of electric distribution must be carried out by a qualied electrical
installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
• This unit is not for home use, only professional applications.
• Never use the xture under the following conditions:
- in places wet;
- in places subject to vibrations or bumps;
- in places with an ambient temperature of over 45°C.
• Make certain that no inammable liquids, water or metal objects enter the xture.
• Do not dismantle or modify the xture.
• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for
an inspection or contact the manufacturer directly.
• If the unit is to be put out of operation denitively, take it to a local recycling
plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
• If this device will be operated in any way dierent to the one described in this manual, it may suer
damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.
• Always additionally secure the projector with the safety rope.When carrying out any work, always com-
ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country
in which the xture’s being used.
• For inside use only. Not designed for outside use.
• The minimum distance between the xture and surrounding walls must be more than 50 cm and the
air vents at the housing must not be covered in any case.
• Install the xture in a well ventilated place.
• Keep any inammable material at a safe distance from the xture.
• The maximum temperature that can be reached on the external surface of the tting, in a thermally
steady state, is high. After power o, please cool down over 15 minutes.
• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent
that their eectiveness is impaired.
• The lamp (LED) shall be changed if it has become damaged or thermally deformed.
• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may
trigger epileptic seizures in photosensitive persons or persons with epilepsy.
3
STARKBLADE8
- 1 - INTRODUCTION
1.1 DESCRIPTION
STARKBLADE is a moving batten luminaire designed to deliver a powerful, zoomable “blade” of beams.
Each of the 40W Osram Ostar RGBW LED pixels are individually controllable, and completely consistent
with the rest of the STARK family.
1.2 TECHNICAL SPECIFICATIONS
LIGHT SOURCE
• Source: 8x40W RGBW Osram Ostar LED
• CT: Tunable 2000K~10000K
• Lux: (3°) 36391 lux - (45°) 3113lux @3m Full
• Source Life Expectancy: >50.000 h
OPTICS
• Zoom: 3°-45° Motorised linear zoom
• Lens Diameter: Square 50x50mm
• Lens Type: HQ glass lens optics
COLOR SYSTEM
• Color Mixing: RGBW/FC
• White Presets: 2000~10000K
• Color Wheel: Virtual color wheel with presets
• Macros: Several pre-build pixel macros with adjustable speed
DYNAMIC EFFECTS
• Pixel Patterns: Preprogrammed dynamic and static patterns
• FX Generator: Adjustable foreground/background color, index, speed, direction
• Static Color Mode: Selection of static color
• Manual Color Mode: Manual adjustment of color
BODY
• Pan Angle: 540/630° with 360° continuous rotation
• Tilt Angle: 360° with 360° continuous rotation
• Pan/Tilt Resolution: 16 bit
• Feedback: Automatic repositioning after accidental movement
• Body: Aluminium structure with hi-resistance polycarbonate cover
• Body Color: Black
CONTROL
• Protocols: DMX512, RDM, Art-Net
• Pixel Control: Pixel2Pixel control
• W-DMX: Included, Wireless Solution receiver
• RDM: RDM ready for xture remote monitor and settings
• Display: LCD high resolution color display with autoip
• Firmware Upgrade: Via menu with internal memory or via USB-DMX interface (UPBOX2) not included
• Hibernation: Power Safe Mode when lost DMX
• Master/Slave: for synchronized operation of more units linked in a chain
STARKBLADE8
4
Fig.1
ELECTRONICS
• Dimmer: Linear 0~100% electronic dimmer
• Dimmer Curves: Dierent dimming curves available
• Strobe/Shutter: 1-25 Hz, electronic
• Battery Backup: Battery backup for user operation without connecting to the main power
• Operating Temperature: -10° ~ +45°
• Flicker: Flicker free operation
ELECTRICAL
• Power Supply: 100-240V – 50/60Hz
• Power Consumption (at 230V): 310W
• Power Consumption (at 120V): 310W
PHYSICAL
• Cooling: Combination of heat pipe cooling system and low noise fan
• Suspension And Fixing: Any position with“quick-lock” omega brackets
• Signal Connection: 5p in/out, RJ45 in/out
• Power Connection: PowerCON TRUE1 in
• IP: 20
• Dimensions (WxHxD): 560x433x206mm
• Weight: 12kg
560mm
22,04in
470mm
18,5in
387mm
15,23in
200mm
7,86in
433mm
17,04in
206mm
8,11in
Technical drawing Fig.1
5
STARKBLADE8
1.3 OPERATING ELEMENTS AND CONNECTIONS
Fig.3
1. LED BAR
2. ROTARY ARM
3. HANDLE
4. LED INDICATOR "WDMX"
5. MICROPHONE
6. CONTROL PANEL with LCD display and 5
button used to access the control panel
functions and manage them.
7. DMX IN (5-pole XLR): 1 = ground, 2 = DMX-, 3
= DMX+, 4 N/C, 5 N/C
8. DMX OUT (XLR a 5 poli): 1= massa, 2 = DMX -,
3 = DMX +, 4 N/C, 5 N/C
9. EtherCON connector Signal IN/OUT
10. EtherCON connector Signal IN/OUT
11. POWER IN (PowerCON IN): for connection to a
socket (100-240V~/50-60Hz) via the supplied
12. MAIN FUSE HOLDER: replace a burnt-out fuse
by one of the same type onlymains cable.
1
12
9
2
A
B
3
564
10 117 8
View B
View A
STARKBLADE8
6
2.1 MOUNTING
The may be set up on a solid and even surface. By means of the xing facilities of the baseplate, the
unit can also be mounted upside down to a cross arm. The base plate is shown in g.3. For xing, stable
mounting clips are required. According to the gure, the bolts of the brackets are placed into the openings
provided in the base plate and turned clockwise until they lock (to the stop). Always ensure that the unit
is rmly xed to avoid vibration and slipping while operating. The mounting place must be of sucient
stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any installa-
tion, always comply scrupulously with all the regulations (particularly regarding safety) currently in force
in the country in which the xture’s being used. Always additionally secure the projector with the safety
rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the maximum
fall of the projector will be 20 cm.
Fig.3
ALISCAFF
CLAMP
SAFETY
CABLE
OMEGA
BRACKETS
- 2 - INSTALLATION
7
STARKBLADE8
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to re-
set all motors to their home position. Shortly after that the STARKBLADE8 is ready for operation. To switch
o, disconnect the mains plug from the socket. For a more convenient operation it is recommended to
connect the unit to a socket which can be switched on and o via light switch.
3.2 BASIC
The STARKBLADE8 has a LCD display and 5 button used to access the control panel functions and manage
them (g.4).
Fig.4 - Functions of the buttons and display icons
LEFT RIGHT UP DOWN ENTER BATTERY
Return to the top
level
Commute from
units, tens, hundred
in the menu
Increases the value
displayed or passes
to the previous item
in a menu
Decreases the value
displayed or passes
to the next item in
the menu
Conrms the
displayed value,
or activates the
displayed function,
or enters the
successive menu
Used to activate the
backup battery. It
allows to switching
display interface
without main power
CONNECT LIGHT INFORMATION SET PROGRAM
STARKBLADE8
8
3.3 MENU STRUCTURE
MENU
1CONNECT ðAddress ðDMX ðValue (1-512)
W-DMX ðValue (1-512)
Artnet ðValue (1-512)
DMX Mode ðMode ðWASH / FX / PIXFX
Edit User ðMax Channel/Control// Fine/Tilt/...
Wireless ðDMX Out ðON/OFF
Reset Connect ðYES/NO
Ethernet ðDMX Out ðON/OFF
IP Address ð2.XX.XX.01
IP Mask ð255.0.0.0
Universe ð00000
RDM ID ðName ðFixture ID Name
Mode ðMode1 / Mode2
Password ð050 (unlocks the following settings)
PID Code ð00001
2SET UP ðTemperature ðTemperature C/F ðCelsius/Fahrenheit
Max Temperature ðValue (60°-139° C)
Movement ðPan Reverse ðYES/NO
Tilt Reverse ðYES/NO
Pan degree ðYES/NO
Tilt Feedbacks ðYES/NO
Tilt Mode ðStandard/Smooth
Screen ðBacklight ðAlways On/Min (01-99)
Flip Display ðYES/NO/AUTO
Display Bright ðValue (00-31)
Key Lock ðON/OFF
Language ðEN/FR/SP...
Fixture ðFans Mode ðAuto Speed/High Speed
No Signal ðClose/Hold/Auto/Music
Hibernation ðDisable/Min (01-99)
Theater Mode ðYES/NO
Frequency ð600Hz ...(1200Hz)
Adjust ðControl,Pan,Pan Fine,
Tilt, Tilt Fine, Tilt Speed,
Shutter, Dimmer, Dimmer
Fade, [...]
ðValue (000-255) for each function
Tabla de contenidos
Otros manuales de Equipo de DJ de ProLights
ProLights
ProLights LEDPINSPOT Manual de usuario
ProLights
ProLights STARBALL Manual de usuario
ProLights
ProLights RA2000PROFILEHB Manual de usuario
ProLights
ProLights LUMIPAR12HPRO Manual de usuario
ProLights
ProLights BEAMROLL8Q Manual de usuario
ProLights
ProLights Chromatrix Manual de usuario
ProLights
ProLights Z8STRIP Manual de usuario
ProLights
ProLights DIGIDRIVER Manual de usuario
ProLights
ProLights Batstrip160 Manual de usuario
ProLights
ProLights TRIBE TRUSSPOD3T Manual de usuario
ProLights
ProLights ECLIPSETU Manual de usuario
ProLights
ProLights EMERALD Manual de usuario
ProLights
ProLights LUMIPAR12UQPRO Manual de usuario
ProLights
ProLights MOSAICOXL Manual de usuario
ProLights
ProLights PHYRO600SNOW Manual de usuario
ProLights
ProLights UVPANEL18 Manual de usuario
ProLights
ProLights LUMIPAR18TRI Manual de usuario
ProLights
ProLights DISPLAYCOBTRWDFC Manual de usuario
ProLights
ProLights ECLIPSE FRESNEL TU Manual de usuario
ProLights
ProLights POLAR500 Manual de usuario
Manuales populares de Equipo de DJ de otras marcas
thomann
thomann Stairville DJ Lase 40-G MK-III Manual de usuario
Eagletone
Eagletone 6 Eyes Flower Manual de usuario
EuroLite
EuroLite FLD-1508 Manual de usuario
Technical Pro
Technical Pro LG8xSEA Manual de usuario
JB Systems
JB Systems Lounge Laser DMX Manual de usuario
Lightmaxx
Lightmaxx Vega Halo 90 Manual de usuario
Elation
Elation FUZE WASH Z350 Manual de usuario
Maverick
Maverick MK3 WASH Manual de usuario
Infinity
Infinity TF-260C7 Fresnel Manual de usuario
Chauvet
Chauvet EVE E-50Z Manual de usuario
Eliminator Lighting
Eliminator Lighting E 138 Manual de usuario
EuroLite
EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario