ProLights SOLAR27Q Manual de usuario
USER MANUAL
MANUALE UTENTE
SOLAR27Q
OUTDOOR COMPACT WASHLIGHT
EN - IT
All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be
reproduced in any form or by any means for any commercial use.
In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the characteris-
tics stated in this instruction manual at any time and without prior notice.
All revisions and updates are available in the ‘manuals’section on site www.musiclights.it
REV.002-12/18
1
SOLAR27Q
Packing content • SOLAR27Q
• S27QFILTER60
• Power cable
• User manual
TABLE OF CONTENTS Safety
General instructions
Warnings and installation precautions
1 Introduction
1. 1 Description
1. 2 Technical specications
1. 3 Operating elements and connections
2 Installation
2. 1 Mounting
3 Functions and settings
3. 1 Operation
3. 2 Basic
3. 3 Menu structure
3. 4 Linking
3. 5 DMX addressing conguration
3. 6 DMX mode conguration
3. 7 DMX addressing
3. 8 Wireless
3. 9 Screen
3. 10 Dimmer mode
3. 11 White balance
3. 12 LED Frequency
3. 13 Factory reload
3. 14 Information
3. 15 Master/Slave
3. 16 Eect
3. 17 Static
3. 18 Manual
3. 19 Connection of the DMX line
3. 20 Construction of the DMX termination
3. 21 DMX control
4 Maintenance
4. 1 Maintenance and cleaning the unit
4. 2 Trouble shooting
2
2
3
3
5
6
7
7
8
9
9
9
9
10
10
11
11
11
11
11
12
12
12
12
13
13
14
17
17
SOLAR27Q
2
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
SAFETY
General instruction
• The products referred to in this manual conform to the European Community Directives and are there-
fore marked with .
• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make any modications on the unit not described in this instruction manual, otherwise you will
risk an electric shock.
• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
• The connection to the main network of electric distribution must be carried out by a qualied electrical
installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
• This unit is not for home use, only professional applications.
• Never use the xture under the following conditions:
- in places subject to vibrations or bumps;
- in places with an ambient temperature of over 50°C.
• Make certain that no inammable liquids, water or metal objects enter the xture.
• Do not dismantle or modify the xture.
• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for
an inspection or contact the manufacturer directly.
• If the unit is to be put out of operation denitively, take it to a local recycling
plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
• If this device will be operated in any way dierent to the one described in this manual, it may suer
damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.
• Always additionally secure the projector with the safety rope.When carrying out any work, always com-
ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country
in which the xture’s being used.
• The minimum distance between the xture and surrounding walls must be more than 50 cm and the
air vents at the housing must not be covered in any case.
• Install the xture in a well ventilated place.
• Keep any inammable material at a safe distance from the xture.
• The maximum temperature that can be reached on the external surface of the tting, in a thermally
steady state, is high. After power o, please cool down over 15 minutes.
• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent
that their eectiveness is impaired.
• The lamp (LED) shall be changed if it has become damaged or thermally deformed.
• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may
trigger epileptic seizures in photosensitive persons or persons with epilepsy.
3
SOLAR27Q
- 1 - INTRODUCTION
1.1 DESCRIPTION
SOLAR27Q is a compact fan-free outdoor wash light featuring an outstanding brightness of 10,832
lumens. Equipped with 27x10W RGBW full colour LEDs, delivering superior colour mixing. Featuring a
slim size as well as the multiple interchangeable optics through magnets, including asymmetrical lters
which, all together, make the SOLAR27Q an incredibly exible device for indoor use and outdoor. Whilst
highly-powerful, the SOLAR27Q also benets from being silent.
1.2 TECHNICAL SPECIFICATIONS
LIGHT SOURCE
• Source:27x10 W CREE RGBW
• CT:5960 K
• CRI:71,8
• Luminous Flux:@FULL 10832 lm - With included lter 6987 lm
• Lux:@FULL (25°) 6133 lux - With included lter 1027 lux @3m Full
• Lux:@FULL (25°) 2208 lux - With included lter 370 lux @5m Full
• Source Life Expectancy: >50.000 h
• Other:Magnetic lter included to achieve 45° (60° lter), barndoor not included
OPTICS
• Beam angle:25° - With included lter 45 °
• Field angle:39° - With included lter 69 °
• Lens diameter:36 mm
• Lens type: honeycomb gapless plano-convex optics
• Additional optics:10° / 15° / 45° / 40° lter / 10X60° lter / 30X60° lter
COLOR SYSTEM
• Color Mixing: RGBW/FC
• CTC: CTC control through independent DMX channel
• Color Wheel: Virtual color wheel with presets
DYNAMIC EFFECTS
• Static Color Mode: Selection of static color
• Manual Color Mode: Manual adjustment of color
• Auto Mode: Built-in programs with execution speed adjustment
BODY
• Hardware On-board:Magnetic lter frame with 45° lter
• Tilt Angle:+/- 90 ° Manual
• Body: Sturdy die-cast aluminium body conceived for long-time durability
• Body Color: Black
CONTROL
• Protocols: DMX512, RDM, W-DMX
• DMX channels:5 / 7 / 10 / 13 / 17 channel
• Pixel control:3 horizontal individually select and control sections
• W-DMX: included, wireless solution receiver
• RDM: RDM ready for xture remote monitor and settings
SOLAR27Q
4
• Display: black OLED high resolution display
• Firmware upgrade: yes, via USB-DMX interface (UPBOX1) not included
• Master/Slave: for synchronized operation of more units linked in a chain
ELECTRONICS
• Dimmer: linear 0~100% electronic dimmer
• Dimmer curves: dierent dimming curves available
• Battery backup: battery backup for user operation without connecting to the main power
• Operating temperature: -20° ~ +50°
• Flicker: icker free frequency with adjustable PWM
• Selectable PWM: 600~25K Hz
ELECTRICAL
• Power supply: 100-240V – 50/60Hz
• Power consumption (at 230V):268 W
• Power consumption (at 120V):275 W
• Output (at 230V):9 units on a single power line
• Output (at 120V):5 units on a single power line
• Power factor:0,994
PHYSICAL
• Cooling: natural cooling of the peculiar chassis and to absence of fans
• Sospension and xing: hanging bracket for oor positioning with“Quick-Lock” system
• Signal connection: Seetronic XLR 5p IN/OUT connectors
• Data connection: W-DMX OEM TRX
• Power connection: Seetronic powerCON waterproof IN/OUT connectors
• IP rating:65 for temporary outdoor application, not for xed installation
• Dimensions (WxHxD):454x153x268.5 mm
• Weight:9 kg
Technical drawing Fig.1
454mm/17,87in 83mm/
3,26in
268.5mm/11,24in
5
SOLAR27Q
1 32
89 9 8
4 5 6 7 1
1.3 OPERATING ELEMENTS AND CONNECTIONS
1. KNOB
2. W-DMX receiver
3. POWER IN (PowerCON TRUE IN): for connection
to a socket (100-240V/50-60Hz) via the supplied
mains cable,
4. DMX IN (5-pole XLR): 1 = massa, 2 = DMX -, 3 =
DMX +, 4 N/C, 5 N/C.
5. CONTROL PANEL with display and 4 touch but-
tons used to access the control panel functions
and manage them.
6. DMX OUT (5-pole XLR): 1 = ground, 2 = DMX-, 3
= DMX+, 4 N/C, 5 N/C.
7. POWER OUT: connect to supply power to the
next unit.
8. HOLE for safety cable passage
9. HOLE for quick-lock omega bracket Fig.2
SOLAR27Q
6
- 2 - INSTALLATION
2.1 MOUNTING
The SOLAR27Q may be set up on a solid and even surface. By means of the xing facilities of the baseplate,
the unit can also be mounted upside down to a cross arm. The base plate is shown in g.3. For xing, stable
mounting clips are required. According to the gure, the bolts of the brackets are placed into the openings
provided in the base plate and turned clockwise until they lock (to the stop). Always ensure that the unit
is rmly xed to avoid vibration and slipping while operating. The mounting place must be of sucient
stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any installa-
tion, always comply scrupulously with all the regulations (particularly regarding safety) currently in force
in the country in which the xture’s being used. Always additionally secure the projector with the safety
rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the maximum
fall of the projector will be 20 cm.
Fig.3
OMEGA
QUICK-LOCK
SAFETY
CABLE
SAFETY
CABLE
CLAMP
7
SOLAR27Q
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to
reset all motors to their home position. Shortly after that the SOLAR27Q is ready for operation. To switch
o, disconnect the mains plug from the socket. For a more convenient operation it is recommended to
connect the unit to a socket which can be switched on and o via light switch.
3.2 BASIC
The control panel of SOLAR27Q has a display and 4 buttons for the complete programming and manage-
ment of the projector menu (g.4).
MENU UP DOWN ENTER
Used to access the menu or to
return a previous menu option
Navigates downwards through
the menu list and increases
the numeric value when in a
function
Navigates upwards through
the menu list and decreases
the numeric value when in a
function
Used to select and store the
current menu or conrm the
current function value or option
within a menu
Fig.4 - Functions of the buttons and display icons
Up Down
Mode Enter
SOLAR27Q
8
3.3 MENU STRUCTURE
MENU
1CONNECT ðDMX Address ð1-512
DMX Mode ð5CH
7CH
10CH
13CH
17CH
Wireless ðReceive On/O
Receive Reset
ð
ð
On/O
No/Yes
Wireless on DMX ðNo/Yes
2SET UP ðScreen ðBacklight
Key Lock
ð
ð
On/10s/20s/30s
No/Yes
3ADVANCED ðDimmer Mode ðO/Dimmer1/2/3
White Balance ðO
Adjust ðRed
Green
Blue
White
ð<125-255>
LED Frequency ð600Hz/1200Hz/2000Hz/4000Hz/6000Hz/25kHz
Factory Reload ðNo/Yes
4INFORMATION ðFixture Time
Version
UID
ð
ð
ð
0-9999
V1.0
<15D00220****>
5STAND ALONE ðMaster/Slave ðMaster
Slave
Eects ðEect1
…
Eect9
ðSpeed 1-100
Static ðFixed Color ðR
G
B
W
GB
RB
RG
RGB
RW
GW
BW
RGW
RBW
GBW
RGBW
ðManual color ðRed
Green
Blue
White
ð<000-255>
Tabla de contenidos
Otros manuales de Equipo de DJ de ProLights
ProLights
ProLights RA3000Profile Manual de usuario
ProLights
ProLights LUMIPAR12UQPRO Manual de usuario
ProLights
ProLights TRIBE LUMIPIX12UT Manual de usuario
ProLights
ProLights ARCLED7337VW Manual de usuario
ProLights
ProLights ARCLED1107UV Manual de usuario
ProLights
ProLights LASERCOMBY Manual de usuario
ProLights
ProLights TRIBE TRUSSPOD3T Manual de usuario
ProLights
ProLights PIXIEWASH Manual de usuario
ProLights
ProLights HZ660D Manual de usuario
ProLights
ProLights CROMOSPOT500 Manual de usuario
ProLights
ProLights PANORAMAIPWBX Manual de usuario
ProLights
ProLights TRIPLESCAN Manual de usuario
ProLights
ProLights DISPLAYCOBTRWDFC Manual de usuario
ProLights
ProLights SMARTBATHEX Manual de usuario
ProLights
ProLights Z8STRIP Manual de usuario
ProLights
ProLights QUADMOON Manual de usuario
ProLights
ProLights EclProfile CT+ Manual de usuario
ProLights
ProLights ASTROBEAM Manual de usuario
ProLights
ProLights PF5 Series Manual de usuario
ProLights
ProLights RADIONSTR Manual de usuario
Manuales populares de Equipo de DJ de otras marcas
thomann
thomann Stairville DJ Lase 40-G MK-III Manual de usuario
Eagletone
Eagletone 6 Eyes Flower Manual de usuario
EuroLite
EuroLite FLD-1508 Manual de usuario
Technical Pro
Technical Pro LG8xSEA Manual de usuario
JB Systems
JB Systems Lounge Laser DMX Manual de usuario
Lightmaxx
Lightmaxx Vega Halo 90 Manual de usuario
Elation
Elation FUZE WASH Z350 Manual de usuario
Maverick
Maverick MK3 WASH Manual de usuario
Infinity
Infinity TF-260C7 Fresnel Manual de usuario
Chauvet
Chauvet EVE E-50Z Manual de usuario
Eliminator Lighting
Eliminator Lighting E 138 Manual de usuario
EuroLite
EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario