ProLights PANORAMAIPWBX Manual de usuario

EN - IT

USER MANUAL

MANUALE UTENTE

MOVING HEAD

PANORAMAIPWBX

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV.001-02/18

PANORAMAIPWBX

Packing content • PANORAMAIPWBX

• Mount bracket

• User manual

TABLE OF

CONTENTS

Safety

General instructions

Warnings and installation precautions

1 Introduction

1. 1 Description

1. 2 Technical specications

1. 3 Operating elements and connections

2 Installation

2. 1 Mounting

3 Functions and settings

3. 1 Operation

3. 2 Basic

3. 3 Menu structure

3. 4 Linking

3. 5 DMX mode

3. 6 DMX conguration

3. 7 DMX addressing

3. 8 Connection of the DMX line

3. 9 Construction of the DMX termination

3. 10 DMX control

3. 11 Wireless control settings

3. 12 Fixture settings

3. 13 Display settings

3. 14 Special functions

3. 15 Lamp settings

3. 16 Fixture information

3. 17 Operation in automatic mode

Slave Receive mode

Music mode

Sensitivity microphone

Scenes Record mode

4 Maintenance

4. 1 Maintenance and cleaning the unit

4. 2 Trouble shooting

PANORAMAIPWBX

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places wet;

- in places subject to vibrations or bumps;

- in places with an ambient temperature of over 45°C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• Always additionally secure the projector with the safety rope.When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the xture’s being used.

• For inside use only. Not designed for outside use.

• The minimum distance between the xture and surrounding walls must be more than 50 cm and the

air vents at the housing must not be covered in any case.

• Install the xture in a well ventilated place.

• Keep any inammable material at a safe distance from the xture.

• The maximum temperature that can be reached on the external surface of the tting, in a thermally

steady state, is high. After power o, please cool down over 15 minutes.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

PANORAMAIPWBX

- 1 - INTRODUCTION

1.1 DESCRIPTION

PANORAMAIPWBFX is a stunning IP65 high output, LED wash luminaire with pixel ring designed to bring

the workhorse LED washlightto outdoor events. Featuring 19 of Osrams new 40W RGBW Ostar LEDs it

delivers a massive output with a huge color range and extensive toolkit of eects.

1.2 TECHNICAL SPECIFICATIONS

LIGHT SOURCE

• Source: 19x40W RGBW Osram Ostar LED

• Lux: (3°) 60000 lux (45°) 5010lux @3m Full

• Lux: (3°) 31500 lux (45°) 2000lux @5m Full

• Source Life Expectancy: >50.000 h

• Other: Outer RGB Pixel ring with frost lm

OPTICS

• Zoom: 3-45° Motorised linear zoom

• Lens Type: HQ glass lens optics

• Additional Optics: Diuser on outer pixel ring

COLOR SYSTEM

• Color Mixing: RGBW/FC

• CTC: CTC control through independent DMX channel

• White Presets: 2000-10000K

• Color Wheel: Virtual color wheel with presets

• Macros: Several pre-build pixel macros with adjustable speed

DYNAMIC EFFECTS

• Pixel Patterns: Preprogrammed dynamic and static patterns

• FX Generator: Adjustable foreground/background color, index, speed, direction

• Special Features: Outer RGB pixel ring with several built in customizable FX macros

BODY

• Pan Angle: 540/630°

• Tilt Angle: 267°

• Pan/Tilt Resolution: 16 bit

• Feedback: Automatic repositioning after accidental movement

• Body: Weatherproof IP65 construction

• Body Color: Black

CONTROL

• Protocols: DMX512, RDM, Art-Net

• DMX Channels: 18/44/120/42ch

• Pixel Control: Pixel2Pixel control

• W-DMX: Included, Wireless Solution receiver

• RDM: RDM ready for xture remote monitor and settings

PANORAMAIPWBX

• Display: LCD high resolution color display with autoip

• Firmware Upgrade: Yes, via USB-DMX interface (UPBOX2) not included

• Hibernation: Power Safe Mode when lost DMX

• Master/Slave: for synchronized operation of more units linked in a chain

ELECTRONICS

• Dimmer: Linear 0~100% electronic dimmer

• Strobe/Shutter: 1-30 Hz, electronic

• Battery Backup: Battery backup for user operation without connecting to the main power

• Operating Temperature: -20° ~ +45°

• Flicker: Flicker free operation

ELECTRICAL

• Power Supply: 100-240V – 50/60Hz

• Power Consumption (at 230V): 661W

• Power Consumption (at 120V): 698W

PHYSICAL

• Cooling: Combination of heat pipe cooling system and low noise fan

• Suspension And Fixing: Any position with“quick-lock” omega brackets

• Signal Connection: IP DMX 5p IN/OUT, IP ARTNET Neutrik IN/OUT

• Power Connection: PowerCON TRUE1 in

• IP: 65 for outdoor events

• Dimensions (WxHxD): 529x676x312mm

• Weight: 35kg

Fig.1Technical drawing

529mm

20,82in

676mm

26,61in

312mm

12,28in

PANORAMAIPWBX

1. MOVING HEAD

2. ROTARY ARM

3. HANDLE

4. CONTROL PANEL with LCD display

and 5 button used to access

the control panel functions and

manage them.

5. LED INDICATOR "WDMX"

6. BATTERY LED INDICATOR

7. ANTENNA

8. EtherCON connector Signal IN/

OUT

9. EtherCON connector Signal IN/

OUT

10. POWER IN (PowerCON IN):

for connection to a socket

(100-240V~/50-60Hz) via the

supplied mains cable.

11. DMX IN (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+,

4 N/C, 5 N/C.

12. DMX OUT (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+,

4 N/C, 5 N/C.

1.3 OPERATING ELEMENTS AND CONNECTIONS

Fig.2

View A

View B

8 7

11 12

PANORAMAIPWBX

2.1 MOUNTING

The may be set up on a solid and even surface. By means of the xing facilities of the baseplate, the

unit can also be mounted upside down to a cross arm. The base plate is shown in g.3. For xing, stable

mounting clips are required. According to the gure, the bolts of the brackets are placed into the openings

provided in the base plate and turned clockwise until they lock (to the stop). Always ensure that the unit

is rmly xed to avoid vibration and slipping while operating. The mounting place must be of sucient

stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any installa-

tion, always comply scrupulously with all the regulations (particularly regarding safety) currently in force

in the country in which the xture’s being used. Always additionally secure the projector with the safety

rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the maximum

fall of the projector will be 20 cm.

- 2 - INSTALLATION

Fig.3

ALISCAFF

CLAMP

SAFETY

CABLE

OMEGA

BRACKETS

PANORAMAIPWBX

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to

reset all motors to their home position. Shortly after that the PANORAMAIPWBX is ready for operation.

To switch o, disconnect the mains plug from the socket. For a more convenient operation it is recom-

mended to connect the unit to a socket which can be switched on and o via light switch.

3.2 BASIC

The PANORAMAIPWBX has a LCD display and 5 button used to access the control panel functions and

manage them (g.4).

Fig.4 - Functions of the buttons and display icons

CONNECT LIGHT INFORMATION SET PROGRAM

LEFT RIGHT UP DOWN ENTER BATTERY

Return to the top

level

Commute from

units, tens, hundred

in the menu

Increases the value

displayed or passes

to the previous item

in a menu

Decreases the value

displayed or passes

to the next item in

the menu

Conrms the

displayed value,

or activates the

displayed function,

or enters the

successive menu

Used to activate the

backup battery. It

allows to switching

display interface

without main power

ENTER

Battery

W-DMX

PANORAMAIPWBX

3.3 MENU STRUCTURE

1CONNECT ðAddress ðDMX ðValue (1-512)

W-DMX ðValue (1-512)

Artnet ðValue (1-512)

DMX Mode ðMode ð1st WASH/1st FX/ 1st PIXFX/1st RINGS/ 2nd

WASH/2nd FX/ 2nd PIXFX/2nd RINGS/ USER

Edit User ðMax Channel/Pan=CH01

Wireless ðDMX Out ðON/OFF

Reset Connect ðYES/NO

Ethernet ðDMX Out ðON/OFF

IP Address ðXX.XX.XX.XX

IP Mask ð255.0.0.0

Universe ð00000

RDM ID ðName ðFixture ID Name

Mode ðMode1/Mode2(Model)

Password ð050 (unlocks the following settings)

PID Code ðxxxxxx

2SET UP ðTemperature ðTemperature C/F ðCelsius/Fahrenheit

Max Temperature ðValue (80~139°C/176~282°F)

Movement ðPan Reverse ðYES/NO

Tilt Reverse ðYES/NO

Pan Degree ð540/630

Feedbacks ðYES/NO

Pan/Tilt Mode ðStandard/Smooth

Screen ðBacklight ðAlways On/Min (02-60)

Flip Display ðYES/NO/AUTO

Display Bright ðValue (00-31)

Key Lock ðON/OFF

Language ðEN/FR/SP...

Fixture ðFans Mode ðAuto Speed/High Speed

No Signal ðClose/Hold/Auto/Music

Hibernation ðDisable/Min (01-99)

Theater Mode ðYES/NO

Frequency ð600Hz……

Adjust ðPan ðValue (000-255) for each function

Tabla de contenidos

Idiomas:

Otros manuales de Equipo de DJ de ProLights

ProLights

ProLights CROMOSPOT500 Manual de usuario

ProLights

ProLights MINIECLFRTU-DY Manual de usuario

ProLights

ProLights SMARTTUBE32 Manual de usuario

ProLights

ProLights LUMIPIX 12QIP Manual de usuario

ProLights

ProLights CROMOBEAM260 Manual de usuario

ProLights

ProLights VERSAPAR PARLED ZOOM Manual de usuario

ProLights

ProLights Z8STRIP Manual de usuario

ProLights

ProLights Z7SPOT Manual de usuario

ProLights

ProLights PF5 Series Manual de usuario

ProLights

ProLights LEDPAR64363RGB Manual de usuario

ProLights

ProLights EclFresnel JrVW Manual de usuario

ProLights

ProLights SUNPIX24TRI Manual de usuario

ProLights

ProLights LUMIPAR6UQ Manual de usuario

ProLights

ProLights VX1300SNOW Manual de usuario

ProLights

ProLights LUMIPAR12UAW Manual de usuario

ProLights

ProLights SUNRISE2 Manual de usuario

ProLights

ProLights TRIBE LUMIPIX12UT Manual de usuario

ProLights

ProLights POLAR500 Manual de usuario

ProLights

ProLights Tribe LUMIPIX12UQ Manual de usuario

ProLights

ProLights RA2000PROFILE Manual de usuario

ProLights

ProLights QUADMOON Manual de usuario

ProLights

ProLights UVPANEL18 Manual de usuario

ProLights

ProLights BATPAR180 Manual de usuario

ProLights

ProLights Tribe LUMIPIX12UQPRO Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario