ProLights MOSAICOXL Manual de usuario

USER MANUAL

MANUALE UTENTE

MOSAICOXL

EN - IT

OUTDOOR LED PROJECTOR

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV.01-07/19

MOSAICOXL

Packing content • MOSAICOXL

• Power adapter cable

• Signal adapter cable (2 pcs)

• User manual

TABLE OF CONTENTS Safety

General instructions

Warnings and installation precautions

1 Introduction

1. 1 Description

1. 2 Technical specifications

1. 3 Operating elements and connections

2 Installation

2. 1 Mounting

2. 2 Mounting with optional bracket

3 Functions and settings

3. 1 Operation

3. 2 Basic

3. 3 Menu structure

3. 4 DMX Addressing

3. 5 DMX Mode

3. 6 Wireless

3. 7 Screen

3. 8 Fixture settings

3. 9 Auto test

3. 10 Manual test

3. 11 Advanced

3. 12 Information on the device

3. 13 Operations in automatic mode

3. 14 DMX 512

3. 15 Color wheel and Rotating wheel

3. 16 DMX Control

3. 17 Connection of the DMX lin

3. 18 Construction of the DMX termination

4 Maintenance

4. 1 Maintenance and cleaning the unit

4. 2 Trouble shooting

4. 3 Gobos replacement

MOSAICOXL

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modiﬁcations on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system ﬁtted with eﬃcient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualiﬁed electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the ﬁxture under the following conditions:

- in places subject to vibrations or bumps;

- in places with a temperature of over 45 °C.

• Make certain that no inﬂammable liquids, water or metal objects enter the ﬁxture.

• Do not dismantle or modify the ﬁxture.

• All work must always be carried out by qualiﬁed technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation deﬁnitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way diﬀerent to the one described in this manual, it may suﬀer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut oﬀ power from the main supply.

• Always additionally secure the projector with the safety rope.When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the ﬁxture’s being used.

• Keep any inﬂammable material at a safe distance from the ﬁxture.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eﬀectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ﬂashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• Do not touch the product’s housing when operating because it may be very hot.

• This product was designed and built strictly for the use indicated in this documentation. Any other use,

not expressly indicated here, could compromise the good condition/operation of the product and/or

be a source of danger.

• We decline any liability deriving from improper use of the product.

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

MOSAICOXL

- 1 - INTRODUCTION

1.1 DESCRIPTION

MOSAICOXL is an extremely powerful long-range outdoor LED ﬁxture for the projection of textures, im-

ages and logos onto buildings and landscapes. Built in a durable IP66 die-cast housing, the MOSAICO XL

oﬀers a phenomenal output of 17’000 lumens and an extensive set of features including CMY colour mix-

ing system and proﬁle to precisely shape the projection area. The exceptional zoom ranges from 5° to 50°

allowing this ﬁxture to be installed at any distance making it versatile in both near-ﬁeld and long-throw

installations.

1.2 TECHNICAL SPECIFICATIONS

LIGHT SOURCE

• Source: 540W high-power white LED

• CT: 6.000K

• Luminous ﬂux: (5°) 8’361lm - (50°) 17’042lm

• Lux: (5°) 113’888lux - (50°) 3’640lx @3 m

• Lux: (5°) 41’000lux - (50°) 1’310lx @5 m

• Source life expectancy: >50.000 h

• Other: TM-30-15RF/RG: 95/65 - TLCI: (5°) 44,2 - (50°) 42,8

OPTICS

• Zoom: 5° - 50° motorised linear zoom

• Lens diameter: 119mm

• Lens type: high-quality glass lens optics

• Focus: motorised

COLOUR SYSTEM

• Colour mixing: linear CMY

• CTC: linear 2600 K - 6000 K

• Colour wheel: 6 dichroic ﬁlters + open

DYNAMIC EFFECTS

• Shutter system: 4 shutter blades with position and ±30° angle adjustment, ±45° rotation of the com-

plete framing system

• Animation wheel: animation wheel with CW and CCW rotation

• Rotating gobos: 7 rotating gobos + open, interchangeable, indexing

• Gobo size: gobo Ø 26,9 mm - img Ø 20,5 mm - 1,1 mm

• Circular prism: 4f with bi-directional rotation, indexing

• Frost: dual frost ﬁlter system, soft-edge linear frost ﬁlter, hard edge linear frost ﬁlter

• Iris: 5 ~ 100% motorised linear iris

• Special features: record scenes and create chases and shows throughout these scenes

BODY

• Body: aluminium die-casting

• Body colour: cool gray 6C

CONTROL

• Protocols: DMX512, RDM, W-DMX

MOSAICOXL

• DMX channels: 28 / 30 / 35channel

• W-DMX: included, wireless solution receiver

• RDM: RDM ready for ﬁxture remote monitor and settings

• Display: black OLED touch display

• Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included

• Master/Slave: for synchronized operation of more units linked in a chain

ELECTRONICS

• Dimmer: linear 0 ~ 100% electronic dimmer

• Dimmer curves: 4 diﬀerent dimming curves available

• Strobe / shutter: 1 - 30 Hz, electronic

• Battery backup: battery backup for user operation without connecting to the main power

• Operating temperature: -20° ~ +45°

• Flicker: ﬂicker free operation

ELECTRICAL

• Power supply: 100-240 V – 50/60 Hz

• Power consumption (at 230V): (static) 571 W - (dinamic) 587W

• Power consumption (at 120V): (static): 592 W - (dinamic) 607W

• Output (at 230V): 3 units on a single power line

• Output (at 120V): 1 units on a single power line

• Power factor: pF 0,97 @230 V- pF 0,99 @120 V

PHYSICAL

Cooling: forced air with IP low noise fan

• Sospension and ﬁxing: hanging bracket suitable for safe hanging and positioning

• Adaptors: XLR and Shuko 16A adaptors included

• Signal connection: moulded IP signal IN/OUT connectors

• Data connection: W-DMX receiver

• Power connection: moulded IP power IN/OUT connectors

• IP rating: 66 for outdoor installations

• Dimensions (WxHxD): 403x462x565mm

• Weight: 37kg

462

403 565

Fig.1Technicaldrawing

MOSAICOXL

1.3 OPERATING ELEMENTS AND CONNECTIONS

1. MOUNTING BRACKET

2. 2x HEXAGONAL HEAD SCREW SYSTEMS for

side, to tighten the bracket.

3. PRESSURE COMPENSATION VALVE

4. POWER IN/ OUT: for connection to a socket

(100-240V~/50-60Hz) via the supplied mains

cable.

5. DMX IN/OUT (5-pole XLR): 1 = ground, 2 =

DMX-, 3 = DMX+, 4 N/C, 5 N/C.

6. ANTENNA

7. CONTROL PANEL with display and 4 button

used to access the control panel functions and

manage them.

Fig.2

Rear panel

556

MOSAICOXL

- 2 - INSTALLATION

2.1 MOUNTING

MOSAICOXL may be set up on a solid and even surface. The unit can also be mounted upside down to a

cross arm. For ﬁxing, stable mounting clips are required. The mounting place must be of suﬃcient stability

and be able to support a weight of 10 times of the unit’s weight.

When carrying out any installation, always comply scrupulously with all the regulations (particularly re-

garding safety) currently in force in the country in which the ﬁxture’s being used.

• Install the projector at a suitable location by means of the mounting bracket (1).

• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-

ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.

• Adjust the projector and use the knob (2) to slightly release or tighten the locking mechanism of the

bracket if is necessary.

Fig.3

MOSAICOXL

Fig.4 - Example with poles with square cross-section of 150x150 mm

2.2 MOUNTING WITH OPTIONAL BRACKET

MOSAICOXL bracket for wall mounting and suspension on poles with square cross-section with diam-

eter from 50x50 mm to 150x150mm or circular cross-section with diameter from 50 mm to 150 mm.

Complete kit of nuts and bolts included.

• Check that all accessories have been

supplied with the product before

installation. The manufacturer is not

responsible for any damage or loss

of accessories after opening the in-

ner packaging.

• Do not use the product for purposes

other than those described.

• When mounting / using the moun-

ting bracket, be sure to avoid dama-

ging the product and causing safety

hazards.

• Do not mount the bracket on a ver-

tical support whose surface shows

deformations, injuries, crushing, etc.

• Make sure all screws, bolts, nuts are

fully tightened.

• Make sure that no external force is

applied to the installed product.

• Locate the position of the optional

MOSUNIBRACKXL bracket at a suit-

able height..

• Both the bracket and the MOSAI-

COXL must be secured with a safety

rope.

MOSAICOXL

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). Then the unit is ready for operation

and can be operated via a DMX controller or it independently performs its show program in succession.

To switch oﬀ, disconnect the mains plug from the socket. For a more convenient operation it is recom-

mended to connect the unit to a socket which can be switched on and oﬀ via a light switch.

3.2 BASIC

MOSAICOXL has a OLED display and 4 button used to access the control panel functions and manage

them (ﬁg.4). Remove the cover from the control panel so you can set up the ﬁxture using the control panel.

MENU UP DOWN ENTER

Used to access the menu or

to return a previous menu

option

Navigates downwards through

the menu list and increases

the numeric value when in a

function

Navigates upwards through

the menu list and decreases

the numeric value when in

a function

Used to select and store the

current menu or confirm the

current function value or

option within a menu

Fig.4 - Functions of the buttons

Mode

Enter

Down

Tabla de contenidos

Idiomas:

Otros manuales de Equipo de DJ de ProLights

ProLights

ProLights MINICLIPSEWD Manual de usuario

ProLights

ProLights MINIECLFRTU-DY Manual de usuario

ProLights

ProLights QUADMOON Manual de usuario

ProLights

ProLights EclSoft LinearIP Manual de usuario

ProLights

ProLights LUMIPAR12HPRO Manual de usuario

ProLights

ProLights Z1200WASH Manual de usuario

ProLights

ProLights RA2000PROFILEHB Manual de usuario

ProLights

ProLights PHYRO600SNOW Manual de usuario

ProLights

ProLights SUNBLAST3000FC Manual de usuario

ProLights

ProLights PIXIEWASH Manual de usuario

ProLights

ProLights LEDPAR64363RGB Manual de usuario

ProLights

ProLights VORTEX VXBUBBLE Manual de usuario

ProLights

ProLights LASERCOMBY Manual de usuario

ProLights

ProLights LUMIPAR7VWPRO Manual de usuario

ProLights

ProLights Z8STRIP Manual de usuario

ProLights

ProLights DISPLAYCOBFC Manual de usuario

ProLights

ProLights BEAMROLL8Q Manual de usuario

ProLights

ProLights ARENACOB4FC Manual de usuario

ProLights

ProLights JETSPOT-3 Manual de usuario

ProLights

ProLights SMARTOWER Manual de usuario

ProLights

ProLights PF5 Series Manual de usuario

ProLights

ProLights Z7SPOT Manual de usuario

ProLights

ProLights AIR5FAN Manual de usuario

ProLights

ProLights MINIECLIPSE Series Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario