PROAIM SS-CT Manual de usuario
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Stabilizer System for Camera Producon Carts (SS-CT)
Assembly Manua l
2 Stage Riser and 5/8” Baby Pin Adapter
Accessory Cross Bar Clamp
with 4 x Locking knobs
Bumper with Clamp
Vest Mount Default
System
2
Loosen the locking knob of the vest mount
default system and aach it to the cart post.
Tighten the locking knob of the vest mount
default system to secure it.
Easily hang the ycam owline onto the vest
mount default system, as shown in the image.
Loosen the vest mount default system knob
and mount it to the crossbar as per your
requirement.
Stabilizer System Setup
Tighten the locking knob and loosen the
crossbar clamp ratchet knob.
Insert the 2 Stage riser with 5/8”baby pin
adapter into the crossbar clamp and ghten
the knob to secure it.
3
YOUR PROAIM STABILIZER SYSTEM FOR CAMERA PRODUCTION CARTS
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
To increase the length of 2 Stage riser with
5/8” baby pin, loosen the ratchet knob, adjust
the height as per requirements and ghten
the knob back.
Now, insert the 2 Stage riser with 5/8” baby
pin into the bumper with a clamp and ghten
the knob.
Lastly, again Insert the 2 Stage riser with 5/8”
baby pin adapter into the crossbar clamp and
ghten the ratchet knob to secure it.
4
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
Tabla de contenidos
Otros manuales de Rack y soporte de PROAIM
PROAIM
PROAIM CM-ISGP-01 Manual de usuario
PROAIM
PROAIM Alpha Manual de usuario
PROAIM
PROAIM P-BMMT-01 Manual de usuario
PROAIM
PROAIM SBP-02 Manual de usuario
PROAIM
PROAIM TP-FWBS-01 Manual de usuario
PROAIM
PROAIM SR-SBP-01 Manual de usuario
PROAIM
PROAIM AP-PTP-SCSR Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
PROAIM
PROAIM CINEMA P-GH-30 Manual de usuario
PROAIM
PROAIM VESA Manual de usuario
