PROAIM CM-ISGP-01 Manual de usuario
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Iso-Grip Vibraon Isolator Car Camera Sucon Mount
(CM-ISGP-01)
Assembly Manua l
1 x Sucon Car Mount
LN CSK Bolts
2 x 1/4"x 30mm Bag Packing
3 x Dust Covers 1 x DJI - QR Plate
3 x Allen Keys
(sizes: 2.5mm, 3mm, 4mm)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
2
• Remove the black dust covers of the Sucon
Car Mount.
Iso-Grip Vibraon Isolator Setup
• Open the quick lock lever manually, as shown
in the image.
• Place your rst sucon cup on selected
posion where you want to shoot and Mount
the sucon cup gripper on a at surface, as
shown in the image.
• Press the lever of the Sucon Cup Gripper
and lock it properly.
NOTE: It has three powerful sucon cups that
grip like glue on any non-porous surface and
rmly hold your setup when moving at high
speeds.
• Loosen the quick lock, set the posion
according to your setup requirement, and
ghten it properly.
NOTE: Its three arculang arms let you
posion your camera gimbal set up at
praccally any angle.
3
• Place the DJI-QR Plate onto the Sucon Car
Mount.
• Then insert an Allen CSK Bolt and ghten
properly using a 4mm Allen key.
• Follow the same process on the other Allen
CSK Bolt.
• Loosen the knob of the DJI-QR Plate.
NOTE: If the QR Plate is loose, ghten its bolt
properly using a 2.5 mm Allen Key.
• Slide the DJI-Ronin Gimbal (Not Included) into
the plate and secure it with the knob of the
QR Plate.
4
• Here is proper assembled image of Sucon
Car Mount & mount. your DJI-Ronin Gimble
(Not Included) of your choice as shown.
NOTE: You can use the wires in dierent
conguraons depending on the load capacity
of your setup.
YOUR PROAIM ISO-GRIP VIBRATION ISOLATOR CAR CAMERA SUCTION MOUNT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
NOTE: It has wire cable blocks that absorb ineral movements and support a 3-10 kg / 6-22lb heavy payload;
Use these blocks in dierent conguraons to precisely achieve the li needed.
Load Adjustment, Removable Cables & Tie-Down Blocks
5
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
Tabla de contenidos
Otros manuales de Rack y soporte de PROAIM
PROAIM
PROAIM SR-SBP-01 Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
PROAIM
PROAIM CINEMA P-GH-30 Manual de usuario
PROAIM
PROAIM GP-FTGP-01 Manual de usuario
PROAIM
PROAIM SS-CT Manual de usuario
PROAIM
PROAIM Alpha Manual de usuario
PROAIM
PROAIM TP-FWBS-01 Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
PROAIM
PROAIM VESA Manual de usuario
PROAIM
PROAIM P-GMBC-01 Manual de usuario
