PROAIM AP-PTP-SCSR Manual de usuario
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Mounng Plate for Scissor Crane (AP-PTP-SCSR)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Proaim Mounng Plate for Scissor Crane
1 x 4mm Allen Key
2
Mounng Plate Setup
Remove the bolts and then remove the Gimbal
uid head from the Powermac scissor jib
(Not Included).
Aach the mounng plate to the Powermac
scissor jib (Not Included), matching the
threads.
Loosen & remove the 4 bolts from the
mounng plate using a 4mm Allen Key.
NOTE: Mounng plate for pan-lt head is
exclusively designed to use with Scissor Crane
(Not Included).
Firstly, remove the uid head (Not Included)
aached to the 17 Powermac Scissor Jib by
loosening the front and rear bolts using a 4mm
Allen key.
Aer aaching the mounng plate, secure it
by inserng bolts with the help of a 4mm
Allen Key.
The mounng plate has been securely
aached to the Powermac Scissor Jib
(Not Included), as shown in the image.
3
Aer inserng the bolt, insert the washer and
wing nut from the top.
Mount the camera (Not Included) to the
camera plaorm of the pan-lt head, properly
align it, and then insert a check nut in it.
To secure the Scissor Mounng Plate to the
Pan lt (Not Included), properly ghten it with
a wing nut as shown in the image.
Aach the pan lt head (Not Included) to the
Scissor Crane Mounng plate by adequately
aligning the hole and inserng the bolt, as
shown in the image.
Tighten the check nut to properly secure the
camera to the camera plaorm, as shown in
the image.
4
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.
YOUR PROAIM MOUNTING PLATE FOR SCISSOR CRANE
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Tabla de contenidos
Otros manuales de Rack y soporte de PROAIM
PROAIM
PROAIM VESA Manual de usuario
PROAIM
PROAIM VCTR-CM Manual de usuario
PROAIM
PROAIM CINEMA P-GH-30 Manual de usuario
PROAIM
PROAIM GP-FTGP-01 Manual de usuario
PROAIM
PROAIM SBP-02 Manual de usuario
PROAIM
PROAIM Alpha Manual de usuario
PROAIM
PROAIM P-BMMT-01 Manual de usuario
PROAIM
PROAIM SnapRig GP205 Manual de usuario
PROAIM
PROAIM CM-ISGP-01 Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
