PROAIM P-18-JS Manual de usuario
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Central
Post
LCD Mounng Arm
Tool Pouch
18 Camera Crane Jib with Stand (P-18-JS)
Assembly Manua l
Jib Stand
Secon 1st
Secon 2nd
Secon 3rd
Secon 4th
Secon 5th
Weight Closer
Weight Rod
Accessory Wire Tensioner Knob
2
Slide Central Post of Jib onto the Jib Stand
and ghten knob-2 to secure it.
Jib Stand Setup
Open shank from central post. Leave the
black washers at one side help of wrench.
Insert the secon 4 inside central post then
Align holes of secon with central post to
screw in the shank back.
Then ghten the bolt properly with the help
of a wrench, and to aach secon 5 to 4,
loosen the bolt from secon 4.
Knob 2
Jib Secons Setup
Secon-5 has connecng bars aached with
secon-4 on both ends and then ghten
them together using provided Allen key.
Connue the Arm build by sliding in secon
3 onto secon 4 as shown in the image.
Connecng Bar
3
Loosen the bolt from the connecng bar with
the help of a 6mm Allen key and wrench,
then insert the bolt using the holes provided.
Then ghten them together using provided
Allen key and wrench as shown in the image.
Connue the Arm build by sliding in secon
2 onto secon 3, and nally secon 1 onto
secon 2.
Connect the Wire/Cable Tensioner with
cable. Simply rotate the mid-secon handle
to ghten the cable adding required amount
of strength to the system.
Tighten Bolt
Insert the weight rods into secon 5, and
then secure them to the weights with 1”
holes.
Then ghten them together using provided
Allen key as shown in the image.
Note: The Jib Stand supports an incredible
payload of up to 90kg and is highly stable in
use.
4
Secure your camera setup with weight closers
as shown.
Note: Once you discover correct balance, con-
sider marking the weights for that parcular
camera; facilitang an easier set up the next
me.
Aach LCD mounng arm onto central fork
then ghten the knob.
Lock the pin for keeping your camera in a
xed angle to take stable shots.
Note: The Jib has many great features such as
a two-arm design, camera mount lt control,
ribbed jib secons & monitor mounng.
Note: The Central fork has provision to aach
LCD Monitor (Not Included) via LCD Mounng
Arm.
Note: You can adjust the arm length from 18 feet to 14 feet and 12 feet by quickly removing the jib
secon. The ability to change the length allows you to use the crane in a variety of scenarios.
Fits in Almost Any Locaon Dierent Shoong Lengths
5
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
YOUR PROAIM 18 CAMERA CRANE JIB WITH STAND
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Note: The jib adapts to 3-axis gimbal, pan lt
and uid head. The Jib has Universal front
mounng to adapt Pan Tilt Heads and 3-Axis
Gimbal Stabilizers. Camera Mount Tilt Control
oers both Auto lt mode and a Manual lt
mode with a control handle.
Otros manuales de Accesorios para cámaras de PROAIM
PROAIM
PROAIM Flylite Jr. FLT-JR Manual de usuario
PROAIM
PROAIM TK-CLIP-00 Manual de usuario
PROAIM
PROAIM P-TMGC-01 Manual de usuario
PROAIM
PROAIM QR-WV-710 Manual de usuario
PROAIM
PROAIM P-L4-SL Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
PROAIM
PROAIM CINEMA TP-BIPT-01 Manual de usuario
PROAIM
PROAIM P-CWFT-01 Manual de usuario
PROAIM
PROAIM P-WH-DMC Manual de usuario
PROAIM
PROAIM P-STRG-CF Manual de usuario
PROAIM
PROAIM VI-GLDE-01 Manual de usuario
PROAIM
PROAIM DL-PLRS-P01 Manual de usuario
PROAIM
PROAIM QR-UD15 Manual de usuario
PROAIM
PROAIM P-SBP-01 Manual de usuario
PROAIM
PROAIM RS-1 Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
PROAIM
PROAIM SL-161 Manual de usuario
PROAIM
PROAIM Camtree Camshade Manual de usuario
PROAIM
PROAIM Victor Pro Manual de usuario
PROAIM
PROAIM CG-014-00 Manual de usuario
