PROAIM E-FOCUS PRO ZOOM Manual de instrucciones
PROAIM E-FOCUS PRO ZOOM & FOCUS CONTROL
SET UP AND OPERATION MANUAL
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in
writing by the Publisher.
PROAIM E- FOCUS PRO ZOOM 2
TABLE OF CONTENTS
Welcome 3
Introducon 4
What’s in the box 4
Contents 4
Easy set up guide 5
Warranty 7
At Proaim, our goal is to ensure 100% Customer sasfacon in all that
we do.
We back our sales with a 1 year warranty from the date of purchase and
work hard to resolve any problems in the unlikely event one should
arise.
With our commitment to connuous improvement and your Feedback,
building on our reputaon of providing aordable, quality products is
PRIORITY 1.
PROAIM E- FOCUS PRO ZOOM 3
Dear Client
On behalf of all the people that work so hard to provide you with the most up to
date, exible and cost ecient producon gear, I would like to welcome you into
Proaim family. By purchasing your Proaim E-Focus Pro Zoom & Focus Control,
you have just joined a host of designers, engineers, machinists, assembly, cus-
tomer service and oce sta that take great pride in all that they do. Our man-
tra of connuous improvement has been the guiding principle of how we conduct
our business since day one. Once you have the opportunity to experience your
new E-Focus Pro Zoom & Focus Control, I hope you will agree we cra quality
products at a compeve price. Products designed to meet and exceed the
standards of today’s compeve price. Products designed to meet and exceed
the standards of today’s real producon world. Standards set by you, our valued
clients and standards we strive to maintain. For they will always be
PROAIM E- FOCUS PRO ZOOM 4
IT IS IMPORTANT THAT YOU READ AND UNDERSTAND THIS GUIDE BEFORE ATTEMPTING TO
ASSEMBLE OR USE YOUR NEW PROAIM E-FOCUS PRO ZOOM & FOCUS CONTROL.
SHOULD YOU NEED ADDITIONAL INFORMATION, TECHNICAL ASSISTANCE IS AVAILABLE 'ON
LINE' BY CONTACTING YOUR SALES REPRESENTATIVE.
INTRODUCTION
The Proaim Remote Zoom & Focus Control clamps to any tripod handle, jib, or support bar. The e
-Focus Pro control provides precise control of zoom & focus with a remote focus & zoom dial.
With its heavy-duty aluminium housing the e-Focus Pro is designed for operator comfort and long
-term use under real world condions
KIT INCLUDES
PROAIM E-Focus
13" 0.8 Gear belt with pin-lock
Remote control
Gear Ring
Charger with wire
Baery
13 long cable
Universal Adapter
This Manual
PROAIM FOLLOW FOCUS APPLICATION
The Follow Focus is applied to the rail system and camera with the
help of gears. You will receive a 2 X 13” exible gear ring. that can be
used to a wide range of lens dia, works on any prime or zoom lens..
Wrap the gear around the lens, cut to size, press on gear locking housing and ghten the screw
to secure it properly .
WHAT’S IN THE BOX
Please inspect the contents of your shipped package to ensure you have re-
ceived all that is pictured and listed below. The grey foam shipping /storage
container has been especially designed to protect your purchase while in
transit and is a good place to keep your follow focus when not in use.
PROAIM E- FOCUS PRO ZOOM 5
DETAILS OF MOTOR DRIVE GEAR
ASSEMBLING OF MOTOR DRIVE GEAR
Insert one motor drive gear on one rod to aach it to the focus ring of camera. Using the
same approach, insert other motor drive gear on the other rod to aach it to the zoom ring
of the camera.
Match the gear teeth of gear belts and motor drive gear properly
for smooth funconing. Tighten the gear properly with provided
screw.
DETAILS OF REMOTE
Motor Drive Gear Motor
Ratchet
knob
Adjustment
ratchet knob
Inbuilt Motor
Wire
15mm rail
mount
The Motor drive gear has 15mm rail
mount to mount on your 15mm rod sup-
port.
The built-in gearbox block on zoom and
focus brackets enables smooth working
of gear.
E-Focus Control provides smooth manual
focus control of lenses.
Top View
ON/OFF
Switch
4 pin male Lemo
Connector for
baery wire
Back View
15mm Rail mount
Front/Side View
Focus Knob
Zoom Knob
Baery Mount
Ratchet knob
Aach the remote to the 15mm rod support and ghtened the knob
to secure it properly.
PROAIM E- FOCUS PRO ZOOM 6
Insert the baery into baery mount.
ATTACHMENT OF WIRES
DETAILS OF WIRE
13 Long cable to be use this e-focus with jib with 4 pin Lemo female connector at one end and
two jack connectors on other end of same wire.
At one end of 13 long cable there is 4 pin Lemo female connector . Aach 4 pin Lemo fe-
male connector of 13 long cable with 4 pin Lemo male connector of remote control.
At other end of 13 long cable there are 2 jack Connectors. Aach one of these jack con-
nector with inbuilt wire connector of one motor drive gear and other with inbuilt wire con-
nector of other motor drive gear .
4 pin Lemo female
connector of 13
long cable
4 pin Lemo male
connector of Re-
mote control
13 cable 2 jack
Connector
Connector of inbuilt
wire of Motor drive
gears
4 pin Lemo
female connector
13 Long Cable Two jack connectors
PROAIM E- FOCUS PRO ZOOM 7
WARRANTY
We oer a one year warranty for our products from the date of purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note
that we will not cover any shipping costs for returning the product to us. If any VAT or import
dues are applied to the return, we will also charge these costs to the customer.
The warranty does not include, by the way of example, damage caused by products that we do
not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product,
or service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or
occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the
replacement parts only) to the customers aer the Warranty Period has expired. We will cover
the complete cost of sending replacement parts within the warranty period. Aer that, Nominal
cost of the product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send back
the item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our
Best to help you out. For any other assistance you can reach us via email.
For any other assistance you can reach us via email.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Accesorios para cámaras de PROAIM
PROAIM
PROAIM Wave-2 Plus Manual de usuario
PROAIM
PROAIM P-MB-600 Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
PROAIM
PROAIM Airwave XL Shock Manual de usuario
PROAIM
PROAIM Cinema Breeza Pro DL-BRZP-01 Manual de usuario
PROAIM
PROAIM RS-1 Manual de usuario
PROAIM
PROAIM CT-STRK-02 Manual de usuario
PROAIM
PROAIM ST-LHWK-01 Manual de usuario
PROAIM
PROAIM P-OHBP-01 Manual de usuario
PROAIM
PROAIM P-MN-TS Manual de usuario
PROAIM
PROAIM VI-SPCM-01 Manual de usuario
PROAIM
PROAIM P-G-PM Manual de usuario
PROAIM
PROAIM 14ft. Jib Arm with Jib Stand Manual de usuario
PROAIM
PROAIM P-PTBH-01 Manual de usuario
PROAIM
PROAIM JB-FR6T-00 Manual de usuario
PROAIM
PROAIM VI-2AXS-01 Manual de usuario
PROAIM
PROAIM CG-A7R3-01 Manual de usuario
PROAIM
PROAIM DL-ANCR-02 Manual de usuario
