PROAIM Cinema Breeza Pro DL-BRZP-01 Manual de usuario

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright

statutes or in wring by the Publisher.

Breeza Pro Camera Dolly with Track|Mitchell (DL-BRZP-01)

Assembly Manual

Proaim Breeza dolly

(with track wheels)

4 x Rods Bag Packing

2 x Female Connector Rods

4 x Male Connector Rods

75mm Bowl Adapter

2 x End Spacers

100mm

Bowl Adapter

2 x Safety Hooks

• Properly secure the female connector rod to

the male connector rod, as shown in the

image.

• Repeat the same process for the second set of

connector rods.

NOTE: To increase the length of the track,

securely aach all connecons.

• Loosen the knobs of both the feet of the end

spacers and open the clamps.

• Now insert both the connector rods in the

clamps.

NOTE: It has four adjustable feet that come with

the end spacers, oering you a mounng

soluon for any lming environment.

• Follow the same process to insert the

connector rods in the second end spacer from

the other side.

NOTE: The track can be used at two dierent

lengths- 4 and 6- suing your setup

requirements.

Assembling of Connector Rods

Assembling of End Spacers

• Aer inserng both the connector rods,

ghten the clamps with the help of the knobs.

• Mount the Breeza Pro Camera Dolly onto the

4 track.

NOTE: Follow the same process to mount the

Breeza Pro Camera Dolly on the 6 track.

• Then properly ghten with the help of the

knobs .

NOTE: The Dolly comes equipped with sixteen

rolling track wheels that run smoothly on tracks

and a at surface, and it has double ball

bearings for ultra-smooth performance.

• Loosen and remove the knobs of both the

Safety Hooks.

• Follow the same process to insert the other

two rods.

NOTE: It has end-spacers that let you aach the

speed rails securely; they can also be mounted

to tripods for an alternave shoong setup.

• Loosen the knobs of the end spacers, open

the clamps and insert the rod. Follow the

same process to insert the second rod as well.

Breeza Pro Camera Dolly Setup

• Loosen the knob of the Fluid Head (Not

Included) and mount it on the 75mm bowl

adapter.

• Aach the safety hook at the boom side of

the Breeza Pro Camera Dolly and properly

ghten it using the knob.

• Aer inserng the Fluid Head (Not Included)

properly ghten it with the help of the locking

knob.

• Push the red ratchet knob of the uid head to

remove the camera plate.

Mount Fluid Head on Bowl Adapter

• Follow the same process for the second hook.

NOTE: Safety hooks can be aached to the

boom of the Dolly to act as security against

pping, ensuring your plaorm doesn't get

knocked o the rails.

• Adjust the height of the track with the clamp,

as per your requirements.

NOTE: Clamps at the top allow for telescopic

height adjustment providing ample elevaon for

dierent shoot setups.

• Aach the 75mm bowl adapter to the boom

of the Breeza Pro Dolly and insert all the

screws.

• Remove all the screws of the 75mm bowl

adapter using a screwdriver (Not Included).

• Now remove the 75mm bowl adapter, as

shown in the image.

• Mount the camera on the uid head and

again secure properly with the red push pin.

Underslung Camera Setup

NOTE: You can mount Breeza Dolly Setup

without rods on the at surface area.

• Aach the Camera Plate to the camera (Not

Included) by matching the threads and

properly ghten using a screw driver (Not

Included) .

Camera Setup

• Remove the Castle Ring from the Mitchell

Plate (Not Included) and mount it on the

Breeza Dolly.

• Mitchell Plate has been mounted on the

Breeza Dolly.

• Now properly aach and secure the Castle

Ring and Mitchell Plate together, as shown in

the image.

• Press the buon on Mitchell Plate to slide the

camera plate.

• Now you can mount your camera (Not

Included) setup, as desired.

Mitchell Setup

• Tighten all the screws with the help of the

screwdriver. The bowl adapter has been

aached to the boom of the Breeza Dolly.

• Mount the camera onto the uid head and

properly lock with the help of the push pin.

• Aach the Camera Plate to the camera (Not

Included) by matching the threads and

properly ghten using a screw driver (Not

Included).

• The camera plate has been removed from

Mitchell, as shown in the image.

Camera Setup

• Camera has been mounted to the uid

head.

NOTE: It comes equipped with an integrated

Mitchell mount and 75mm and 100mm Bowl

Adapters, giving you versale camera-heads

mounng opons.

NOTE: Bubble level on Breeza Dolly & End

Spacers helps to check the proper level of

Breeza Dolly with setup.

Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,

we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it

cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon

and evaluaon by us.

Liability: We are not liable for damage caused by products that we do not supply or from mishandling in

transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.

most support and care unl you use our product.

YOUR PROAIM BREEZA PRO CAMERA DOLLY WITH TRACK

ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

Tabla de contenidos

Otros manuales de Accesorios para cámaras de PROAIM

PROAIM

PROAIM DL-FLDB-01 Manual de usuario

PROAIM

PROAIM Explorer Pro PT-EXPR-02 Manual de usuario

PROAIM

PROAIM Kite-22 Ultimate Package Manual de instrucciones

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM SnapRig NATO Manual de usuario

PROAIM

PROAIM Swift Dolly Manual de usuario

PROAIM

PROAIM Bowado Pro Manual de usuario

PROAIM

PROAIM P-TP300 Manual de usuario

PROAIM

PROAIM P-LTCP-01 Manual de usuario

PROAIM

PROAIM SnapRig CG210 Manual de usuario

PROAIM

PROAIM RS-1 Manual de usuario

PROAIM

PROAIM JB-AS12-00 Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM P-PRT-D Manual de usuario

PROAIM

PROAIM VI-TRIW-00 Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM Airwave Ultra Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM Explorer Manual de usuario

PROAIM

PROAIM P-MN-TS Manual de usuario

Manuales populares de Accesorios para cámaras de otras marcas

Viltrox

Viltrox EF-NEX Instrucciones de instalación

Calumet

Calumet 7100 Series CK7114 Manual de usuario

Ropox

Ropox 4Single Series Manual de usuario

Cambo

Cambo Wide DS Digital Series Instrucciones de funcionamiento

Samsung

Samsung SHG-120 Manual de usuario

Ryobi

Ryobi BPL-1820 Manual de operación

Aegis

Aegis ABL-36020P Manual de usuario

Pentax

Pentax Data Back Fc Manual de usuario

Fantasea

Fantasea EyeGrabber F Series Manual de usuario

Honeywell

Honeywell HDZ20HD Manual de usuario

EGO

EGO BA1400T Manual de usuario

Sima

Sima SRW-62 Manual de usuario

Shape

Shape A7SSMKIT Manual de usuario

Slide Kamera

Slide Kamera HST-2 Manual de usuario

Power works

Power works 2902613 Manual de usuario

SES

SES SE-2047-2 Manual de usuario

Olympus

Olympus PT-EP05L Manual de usuario

Starlite

Starlite OctoDome nxt Manual de usuario