PROAIM Airwave XL Shock Manual de usuario

Instruction Manual

Airwave XL Shock

Absorber Arm (VI-APRO-00)

Subject Page

Foreword 3

Introducon 4

Safety Hints 5

Assembling 6-11

Warranty 12

At Proaim, our goal is to ensure 100% Customer Sasfacon in all that we do.

We back our sales with a 1 year warranty from the date of purchase and work hard

to resolve any problems in the unlikely event one should arise.

With our commitment to connuous improvement and your Feedback, building on

our reputaon of providing aordable, quality products is

PRIORITY #1.

Table of Contents

Dear Client,

On behalf of all the people that work so hard to provide you with the most

up-to-date, exible and cost-ecient producon gear, we would like to welcome

you into the Proaim family.

By purchasing your Airwave XL Shock Absorber Arm, you have just joined a host of

designers, engineers, machinists, assembly, customer service and oce sta that

take great pride in all that they do. Our mantra of connuous improvement has

been the guiding principle of how we conduct our business since day one.

Once you have the opportunity to experience your new Airwave XL Shock Absorber

Arm, we hope you will agree that we cra quality products at a compeve price.

Products designed to meet and exceed the standards of today’s real producon

world.

Standards set by our valued clients and standards we strive to maintain.

With Best Wishes,

Proaim Team

Welcome To Proaim!

The Proaim Airwave XL Shock Absorber Arm with dual spring conguraon (two

springs on each side), is the biggest of our Vercal Vibraon Isolator arms. Our

precision engineered system will accommodate payloads of 30-65kg (66-143lb),

making it suitable for Remote Pan Tilt heads and any 3-Axis Gimbal system like DJI

Ronin, Movi and Shotover G1. It is custom designed to reduce vibraon typically

experienced when shoong from moving plaorms on rough terrain or paved

roads. It’s a hard mount system, made for gimbals that you want to mount on

vehicles such as cars, ATVs, boats, snowmobiles etc.

Introducon

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received

everything that is listed below.

Airwave XL Dual Spring

Shock Absorber Arm

2x Sca Clamps Isolator Plate Castle Ring Castle Nut Wrench

Flight Case

ATTENTION: PLEASE READ THIS BEFORE USING TO PREVENT SERIOUS DAMAGE TO

THE GEAR!

IT IS RECOMMENDED TO HAVE PROPER SPRING ADJUSTMENTS

For addional tension support, adjust both the spring sets to same degree of

tension.

ALWAYS KEEP FINGERS CLEAR FROM ANY OF THE MECHANICAL MOVING PARTS

Operate the Arm from outside of any of the crossing arms and from the spring

sha.

CAREFULLY TIGHTEN THE FASTENERS

When connected to scaold tabes , ensure that all locking bolts and scaold clamps

are locked securely.

It prevent breakage to the equipment & any harm to crew. It also ensures

protecon & stability.

ALWAYS USE EXTREME CAUTION WHEN USING THE TRACK ON A TRIPOD!

Load shi occurs when the camera moves along the track. This can cause the

camera and slider to tumble over resulng in catastrophic damage! Always

usesandbags on the legs and support on the ends to prevent this!

FOLLOWING THESE GUIDELINES WILL PROVIDE BETTER IMAGES AND TROUBLE FREE

OPERATION.

SHOULD YOU NEED ADDITIONAL INFORMATION, TECHNICAL ASSISTANCE IS AVAILA-

BLE ‘ONLINE’ BY CONTACTING YOUR SALES REPRESENTATIVE.

Safety Hints

 Then ghten Castle Ring with the help of

provided Castle Nut Wrench.

 Mount Isolator Arm onto Mitchell stand and x it with Castle Ring by twisng.

 Loosen the locking nuts of each spring.

Turn the leveling springs clockwise to

add tension as well as to raise the arm,

turning it an-clockwise will release

tension and lower it. Aer seng,

re-lock the locking nuts of each spring.

Spring Adjustment

NOTE: Adjust both springs equally.

Assembling

 In order to smoothen Spring Tension, turn the adjustment knob. If the arm is too so, turn it

towards direcon of H (Hard). If the arm is rigid turn it towards the direcon of S (So).

NOTE: The valves should always be adjusted

evenly and set idencally. Rebound and

compression of the hydraulic valves should

be set in such a way so that any loose

swinging or vibraon of the arm is

eliminated.

 To change from Over Slung to Under Slung, remove all the bolts - 3 from each side of Mitchell

Mount, which is aached on both sides of the Arm.

NOTE: According to your need, you can aach your Gimbal Mount both on top and boom of

the Mitchell Plate.

Other Conguraons

 Aer aaching your Ronin to Mitchell

Plate, ghten it with Castle Nut Wrench.

 Mount the setup, as shown in image.

Aaching the Isolator Plate

NOTE: For aaching the L-shaped Isolator Plate, you need to rst detach Mitchell Mount

from the Arm.

 Loosen the bolts and remove Mitchell

Mount from your Arm.

 Aach Isolator Plate with the arm and ghten with help of provided screw and allen key.

NOTE 1 : The Isolator Plate can be

adjusted upwards at 3 levels.

NOTE 2 : The Isolator Plate can be

adjusted upside down at 3 levels.

 Aach Mitchell Vibraon Isolator (Not Included) with Isolator Plate and ghten it properly

with allen key.

 Then loosen the bolts of Mitchell Plate. Insert Castle Ring as shown in the image and ghten

it accurately.

 Mount your setup.

Tabla de contenidos

Otros manuales de Accesorios para cámaras de PROAIM

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM SL-CNL Manual de usuario

PROAIM

PROAIM VI-2AXS-01 Manual de usuario

PROAIM

PROAIM CST-100-01 Manual de usuario

PROAIM

PROAIM FF-WRLS-DR Manual de usuario

PROAIM

PROAIM P-MN-TS Manual de usuario

PROAIM

PROAIM BP-302-01 Manual de usuario

PROAIM

PROAIM RS-1 Manual de usuario

PROAIM

PROAIM Victor Pro Manual de usuario

PROAIM

PROAIM Polaris Mini Manual de usuario

PROAIM

PROAIM CG-A7R3-01 Manual de usuario

PROAIM

PROAIM WS-284-00 Manual de usuario

PROAIM

PROAIM 9CTH-TMP Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM P-WNG Manual de instrucciones

PROAIM

PROAIM VH-OBTR-01 Manual de usuario

PROAIM

PROAIM Airwave XL Shock Absorber Arm Manual de usuario

PROAIM

PROAIM SL-051 Manual de usuario

PROAIM

PROAIM Kit-6-CF Manual de usuario

PROAIM

PROAIM SnapRig CG210 Manual de usuario

PROAIM

PROAIM DL-ANCR-02 Manual de usuario

PROAIM

PROAIM P-FT-J Manual de usuario

PROAIM

PROAIM Tango P-TNGO-01 Manual de usuario

PROAIM

PROAIM LB230 Manual de usuario

Manuales populares de Accesorios para cámaras de otras marcas

Viltrox

Viltrox EF-NEX Instrucciones de instalación

Calumet

Calumet 7100 Series CK7114 Manual de usuario

Ropox

Ropox 4Single Series Manual de usuario

Cambo

Cambo Wide DS Digital Series Instrucciones de funcionamiento

Samsung

Samsung SHG-120 Manual de usuario

Ryobi

Ryobi BPL-1820 Manual de operación

Aegis

Aegis ABL-36020P Manual de usuario

Pentax

Pentax Data Back Fc Manual de usuario

Fantasea

Fantasea EyeGrabber F Series Manual de usuario

Honeywell

Honeywell HDZ20HD Manual de usuario

EGO

EGO BA1400T Manual de usuario

Sima

Sima SRW-62 Manual de usuario

Shape

Shape A7SSMKIT Manual de usuario

Slide Kamera

Slide Kamera HST-2 Manual de usuario

Power works

Power works 2902613 Manual de usuario

SES

SES SE-2047-2 Manual de usuario

Olympus

Olympus PT-EP05L Manual de usuario

Starlite

Starlite OctoDome nxt Manual de usuario