POSIFLEX XT6315 Manual de usuario
1
Package Contents
17” fanless touch terminal with
Gen 7E or Gen 8E base stand (x 1)
Power adapter (x 1)
Power cord (x 1)
User manual (x 1)
Recovery DVD or Information
DVD (x 1)
Product Features
Intel Bay Trail-D J1900 2.0G CPU, Quad Core, 2MB Cache
DDR3L SO-DIMM slot x 1, max 8GB
True Flat P-Cap touch with 10 points multi-touch
Support Windows 7, POSReady 7, Win 8.1 Industry, Linux per request
Gen 7E or optional Gen 8E foldable base (U.S. Patent #9004436)
16780903020 Ver. A0
http://www.posiflex.com
XT-3817
Fanless Touch Terminal
User Manual
2
Views of the XT-3817 with Gen 7E Base Stand
Front View
Rear View
Side View
XT-3817
P-Cap Touch Panel
Cable Cover
Neck Cover
Cable Exit
HDD Cover
Power Button
Brightness Adjustment Button ＋
Brightness Adjustment Button －
I/O Compartment
Cover
Cable Arrangement
Cover
LED indicator
Gen 7E Base Stand
3
Bottom View
Views of the XT-3817 with Gen 8E Base Stand
Front View
Rear View
XT-3817
P-Cap Touch Panel
Cable Holder
HDD Cover
Rubber Feet with Fixing Screw
Rubber Feet with Fixing Screw
Cable Exit
I/O Compartment
Cover
Cable Arrangement
Cover
Cable Cover
Neck Cover
Cable Exit
LED indicator
Gen 8E Base Stand
4
Side View
Bottom View
View of I/O Interface of XT-3817
Rubber Feet with Fixing Screw
USB Ports
DB9 COM Ports
VGA Port
CR Port
LAN Ports
12V BAT Port
DC IN
Power
Connector
Rubber Feet with Fixing Screw
UPS Battery
Compartment
Power Button
Brightness Adjustment Button ＋
Brightness Adjustment Button －
Power Adapter
Compartment
PoweredUSB
Compartment
5
Positioning your POS for a Perfect Viewing Angle
The adjustable base stands designed for XT-3817 come in two models,
Gen 7E/8E, and allow you to determine an ideal position for your terminal
using its unique tilt adjustment mechanism. As the below figures suggest, both
Gen 7E and Gen 8E base stands provide three standard positioning solutions
for your terminal: flat folded mode, low profile mode, and full extended mode.
XT-3817 with Gen 7E Stand Base
Flat folded mode
Low profile mode
Full extended mode
XT-3817 with Gen 8E Stand Base
Flat folded mode
Low profile mode
Full extended mode
In general, XT-3817 will be set up beforehand in flat folded mode before
packaged into the box for shipping. After it is unpacked, you may re-adjust the
terminal in either low profile mode or full extended mode according to your
situation. Below will provide instructions on how to adjust the specific base
stand connected to the POS system among different positioning modes. As a
reminder, please be careful not to touch the LCD panel while setting up the tilt
angle.
Please refer to the following instructions on how to switch among different
positioning modes to find an ideal viewing angle for XT-3817 with Gen 7E
base stand.
6
XT-3817 with Gen 7E Base Stand
1. Unpack XT-3817, which is supposed to be set
in flat folded mode, out of the package box
and then lay your POS system on a flat
surface.
2. Steady the base stand with one hand, and then
tilt the screen downwards.
3. Position your terminal in Full Extended mode.
3.1 After grabbing the bottom edge of the screen with your hand, gently
move the screen upward until the screen is locked into place with a
click sound.
3.2 Tilt the screen up or down to your desired
angle. Please do not press on the LCD panel
while setting up the tilt angle.
7
4. Restore your terminal to Flat Folded mode from Full Extended
mode.
4.1 Tilt your screen in a horizontal position.
4.2 Remove the cable cover from the base
stand.
4.3 Support the screen with one hand holding onto its bottom edge.
While pulling the lever backwards, move the display downwards
until the lever is lifted off the hook as shown in the figure
4.4 Push the cable cover back.
4.5 Tilt the screen again to the horizontal
position.
Hook
Lever
8
5. Position the terminal in Low Profile mode.
5.1 Follow Step 4 to set up the termimal in Flat
Folded mode.
5.2 With on hand holding the base, tilt the
screen all the way down
5.3 To tilt screen up or down to your desired
angle, please be advised to keep the base
stand steady with one hand to do so. Do
NOT press on the LCD panel while setting
up the tilt angle.
XT-3817 with Gen 8E Base Stand
Please refer to the following instructions on how to switch among different
positioning modes to find an ideal viewing angle for XT-3817 with
Gen 8E base stand.
1. Unpack XT-3817, which is supposed to be set
in flat folded mode, out of the package box and
then lay your POS system on a flat surface.
2. While steadying the terminal with your hand
holding onto the base stand, tilt the screen
down.
9
3. Push the cable cover outwards to remove
it from the base stand.
4. Position your terminal in Full Extended mode.
4.1 Support the screen with one hand holding onto its bottom edge.
Then, while pulling the lever backwards, move the display upwards
until the lever is snapped into the lower hook to raise the screen as
shown in the below figure.
4.2 Push the cable cover back.
4.3 Tilt the screen up or down to your desired
angle. Please do not press on the LCD
panel while setting up the tilt angle.
Lower
hook
Lever
10
5. Position the terminal in Low Profile mode.
5.1 Properly tilt the screen up or down to make sure the cable cover
could be removed easily. Then, release the cable cover from the
base.
5.2 Support the screen with one hand holding onto its bottom edge.
Then, while pulling the lever backwards, move the display upwards
or downwards until the lever is snapped into the upper hook to lower
the screen as shown in the below figure.
5.3 Push the cable cover back.
5.4 Tilt the screen up or down to your desired
angle. Please do not press on the LCD panel
while setting up the tilt angle.
Lever
Upper
hook
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Terminal táctil de POSIFLEX
POSIFLEX
POSIFLEX TX-4200 Manual de usuario
POSIFLEX
POSIFLEX HC-1521 Series Manual de usuario
POSIFLEX
POSIFLEX KS - 6910 series Manual de usuario
POSIFLEX
POSIFLEX KS - 6215N Manual de usuario
POSIFLEX
POSIFLEX PS-3515 Manual de usuario
POSIFLEX
POSIFLEX MT-4310W/R Manual de usuario
POSIFLEX
POSIFLEX JIVA TP-5700 Manual de usuario
POSIFLEX
POSIFLEX XT-3815 Manual de usuario
POSIFLEX
POSIFLEX Jiva LT-5600 Manual de usuario
POSIFLEX
POSIFLEX KS-7415 Manual de usuario
POSIFLEX
POSIFLEX XT-3817-G2 Manual de usuario
POSIFLEX
POSIFLEX SA-304 Manual de usuario
POSIFLEX
POSIFLEX SA-104 Manual de usuario
POSIFLEX
POSIFLEX KS-7410 Manual de usuario
POSIFLEX
POSIFLEX KS - 6915 Manual de usuario
POSIFLEX
POSIFLEX Jiva TP-5815 Pro series Manual de usuario
POSIFLEX
POSIFLEX RT-6015 Manual de usuario
POSIFLEX
POSIFLEX XT-5415 Manual de usuario
POSIFLEX
POSIFLEX PS-3315 Manual de usuario
POSIFLEX
POSIFLEX Jiva TP-8000 Manual de usuario
