Pilz PNOZmulti Mini Manual de usuario

PNOZ mm0p-T

Operating Manual 1002704-EN-02

}Configurable compact control systems PNOZmulti Mini

Preface

This document is a translation of the original document.

All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made

for internal purposes. Suggestions and comments for improving this documentation will be

gratefully received.

Source code from third-party manufacturers or open source software has been used for

some components. The relevant licence information is available on the Internet on the Pilz

homepage.

Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS p®,

SafetyEYE®, SafetyNET p®, the spirit of safety® are registered and protected trademarks

of Pilz GmbH & Co. KG in some countries.

SD means Secure Digital

Contents

Operating Manual PNOZ mm0p-T

1002704-EN-02 3

Section 1 Introduction 5

1.1 Validity of documentation 5

1.2 Using the documentation 5

1.3 Definition of symbols 5

Section 2 Overview 7

2.1 Range 7

2.2 Unit features 7

2.3 Chip card 8

2.4 Front view 8

Section 3 Safety 10

3.1 Intended use 10

3.2 System requirements 10

3.3 Safety regulations 10

3.3.1 Safety assessment 10

3.3.2 Use of qualified personnel 11

3.3.3 Warranty and liability 11

3.3.4 Disposal 11

3.3.5 For your safety 11

Section 4 Function description 12

4.1 Integrated protection mechanisms 12

4.2 Functions 12

4.3 System reaction time 12

4.4 Diagnostics 12

4.5 Block diagram 12

Section 5 Installation 13

5.1 Control cabinet installation 13

5.1.1 Mounting distances 14

5.2 Dimensions 15

5.3 Install base unit without expansion module 15

5.4 Connecting the base unit and expansion modules 16

Section 6 Commissioning 17

6.1 General wiring guidelines 17

6.2 Preparing for operation 17

6.2.1 Function test during commissioning 17

6.2.2 Using the chip card 17

6.2.3 Commissioning the PNOZmulti safety system 18

6.2.3.1 Load project from chip card 18

6.2.3.2 Load project via USB port 19

6.2.4 Connection 19

6.3 Connection example 21

Contents

Operating Manual PNOZ mm0p-T

1002704-EN-02 4

Section 7 Operation 22

7.1 LED indicators 22

7.2 Restart PNOZmulti 22

7.3 Stop PNOZmulti 23

Section 8 Technical details 24

8.1 Safety characteristic data 27

Section 9 Supplementary data 29

9.1 Maximum capacitive load C (μF) with load current I (A) at the semicon-

ductor outputs

9.2 Maximum permitted total current of the semiconductor outputs 29

Section 10 Order reference 30

Introduction

Operating Manual PNOZ mm0p-T

1002704-EN-02 5

1 Introduction

1.1 Validity of documentation

This documentation is valid for the product PNOZ mm0p-T. It is valid until new documenta-

tion is published.

This operating manual explains the function and operation, describes the installation and

provides guidelines on how to connect the product.

1.2 Using the documentation

This document is intended for instruction. Only install and commission the product if you

have read and understood this document. The document should be retained for future ref-

erence.

1.3 Definition of symbols

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation that poses

an immediate threat of serious injury and death and indicates preventive

measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation that could

lead to serious injury and death and indicates preventive measures that can

be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor injury plus

material damage, and also provides information on preventive measures

that can be taken.

NOTICE

This describes a situation in which the product or devices could be dam-

aged and also provides information on preventive measures that can be

taken. It also highlights areas within the text that are of particular import-

ance.

Introduction

Operating Manual PNOZ mm0p-T

1002704-EN-02 6

INFORMATION

This gives advice on applications and provides information on special fea-

tures.

Overview

Operating Manual PNOZ mm0p-T

1002704-EN-02 7

2 Overview

2.1 Range

}Base unit PNOZ mm0p-T

}Right-hand terminator: (yellow)

}Left-hand terminator: (yellow/black)

2.2 Unit features

Using the product PNOZ mm0p-T:

Base unit from the configurable control system PNOZmulti

The product has the following features:

}Can be configured in the PNOZmulti Configurator

}Semiconductor outputs:

4 safety outputs

Depending on the application, up to PL e of EN ISO 13849-1 and up to SIL CL 3 of EN

IEC 62061

}12 inputs for connecting, for example:

– E-STOP pushbuttons

– Two-hand pushbuttons

– Safety gate limit switches

– Reset buttons

– Light beam devices

– Scanners

– Enabling switches

– PSEN

– Operating mode selector switches

– Pressure sensitive mats

}8 configurable inputs/outputs

Can be configured as:

– Inputs (see above for connection options)

– Outputs for standard applications

}4 configurable outputs

Can be configured as:

– Outputs for standard applications

– Test pulse outputs

Overview

Operating Manual PNOZ mm0p-T

1002704-EN-02 8

}LED for:

– Error messages

– Diagnostics

– Supply voltage

– State of the inputs

– State of the outputs

}Test pulse outputs used to monitor shorts across the inputs

}Monitoring of shorts between the safety outputs

}Plug-in connection terminals:

Either spring-loaded terminal or screw terminal available as an accessory (see order

reference)

}Pushbutton to change the operating status and download the project.

}Coated version:

Increased environmental requirements (see Technical details [ 24])

2.3 Chip card

To be able to use the product you will need a chip card.

Chip cards are available with memories of 8 kByte and 32 kByte. For large-scale projects

we recommend the 32 kByte chip card (see Technical Catalogue: Accessories chapter).

2.4 Front view

I/O LEDs

LED INFO

Front view with and without cover

Overview

Operating Manual PNOZ mm0p-T

1002704-EN-02 9

Legend

}X1:

– Inputs I8 ... I15

}X2:

– Configurable test pulse/auxiliary outputs T0M20 ... T3M23

– Semiconductor outputs O0 ... O3

}X3:

– Configurable inputs/outputs IM0 – IM3

– Inputs I4 ... I7

}X4:

– Configurable inputs/outputs IM16 – IM19

– Supply connections

}LEDs:

– POWER

– RUN

– DIAG

– FAULT

– I FAULT

– O FAULT

– INFO

– I/O

Safety

Operating Manual PNOZ mm0p-T

1002704-EN-02 10

3 Safety

3.1 Intended use

The configurable small control systems PNOZmulti are used for the safety-related interrup-

tion of safety circuits and are designed for use in:

}E-STOP equipment

}Safety circuits in accordance with VDE0113 Part 1 and EN60204-1

CAUTION!

Inputs and outputs for standard functions must not be used for safety-re-

lated applications.

The coated version of the product PNOZ mm0p-T is suitable for use where there are in-

creased environmental requirements (see Technical details [ 24]).

The following is deemed improper use in particular:

}Any component, technical or electrical modification to the product

}Use of the product outside the areas described in this manual

}Use of the product outside the technical details (see Technical details [ 24]).

NOTICE

EMC-compliant electrical installation

The product is designed for use in an industrial environment. The product

may cause interference if installed in other environments. If installed in other

environments, measures should be taken to comply with the applicable

standards and directives for the respective installation site with regard to in-

terference.

3.2 System requirements

Please refer to the "Product Modifications" document in the "Version overview" section for

details of which versions of the PNOZmulti Configurator can be used for this product.

3.3 Safety regulations

3.3.1 Safety assessment

Before using a unit it is necessary to perform a safety assessment in accordance with the

Machinery Directive.

Functional safety is guaranteed for the product as a single component. However, this does

not guarantee the functional safety of the overall plant/machine. In order to achieve the re-

quired safety level for the overall plant/machine, define the safety requirements for the

plant/machine and then define how these must be implemented from a technical and organ-

isational standpoint.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de control de Pilz

Pilz

Pilz PNOZ m ES CC-Link Manual de usuario

Pilz

Pilz PNOZ mm0.1p Manual de usuario

Pilz

Pilz PNOZmulti Manual de usuario

Pilz

Pilz PSS u2 ES 4DO SR 0.5A Manual de usuario

Pilz

Pilz PSSuniversal multi PSSu H m F DPsafe SN SD Manual de usuario

Pilz

Pilz PSS u2 ES 16DI Manual de usuario

Pilz

Pilz PNOZ ml1p Manual de usuario

Pilz

Pilz PSS u2 ES 4DO R 8A Manual de usuario

Pilz

Pilz PMCprimo C2 Manual de usuario

Pilz

Pilz PSSu WB S IDN Manual de usuario

Pilz

Pilz PNOZmulti Series Manual de usuario

Pilz

Pilz PSS67 PLC1 16FDI Manual de usuario

Pilz

Pilz PNOZ m ES RS232 Manual de usuario

Pilz

Pilz PSS u2 B1 Manual de usuario

Pilz

Pilz PSSuniversal Manual de usuario

Pilz

Pilz PSSu E S 2AI I se-T Manual de usuario

Pilz

Pilz PNOZ ms1p Manual de usuario

Pilz

Pilz PNOZ mmc6p Manual de usuario

Pilz

Pilz PSSu H PLC1 FS SN SD Series Manual de usuario

Pilz

Pilz PNOZ m B0 Manual de instrucciones

Pilz

Pilz PMCprimo C Manual de usuario

Pilz

Pilz PSS u2 EF 8DI Manual de usuario

Pilz

Pilz PNOZ m ES EtherCAT Manual de usuario

Pilz

Pilz PSS u2 ES 4IOL Manual de usuario

Manuales populares de Sistema de control de otras marcas

Pentair Pool Products

Pentair Pool Products Compool Manual de usuario

ComfortNET

ComfortNET CTK04 Manual de usuario

Fireye

Fireye InSight II 95DSS3 Manual de usuario

CAME

CAME G3000 Manual de usuario

Idemia

Idemia MorphoAccess VP MD Manual de usuario

Axis

Axis P1445-LE-3 Manual de usuario

HEIDENHAIN

HEIDENHAIN TNC 150 B Manual de usuario

CNC-Step

CNC-Step High-Z T-Series Manual de usuario

Doosan

Doosan DVF Series Manual de usuario

Honeywell

Honeywell KAP 140 Manual de usuario

Honeywell

Honeywell vk41 series Manual de usuario

AirBench

AirBench FPW Guía de instalación

Cypress

Cypress HHR-3160 Manual de usuario

CAME

CAME GLT40AOS Manual de usuario

Zonex

Zonex GEN II -VVT Guía del usuario

Altronics

Altronics K 9650 Manual de usuario

micro-trak

micro-trak RoadMaster Manual de usuario

micro-trak

micro-trak Calc-An-Acre II Manual de usuario