Multitech MultiModem MT9234ZPX-PCIE Manual de usuario
MultiModem® ZPX
V.92 Internal Modem
MT9234ZPX-UPCI
MT9234ZPX-UPCI-NV
MT9234ZPX-PCIE
MT9234ZPX-PCIE-NV
Quick Start Guide
2 Multi-Tech Systems, Inc.
MultiModem ZPX Quick Start Guide
V.92 Internal Modem
MT9234ZPX-UPCI, MT9234ZPX-UPCI-NV
MT9234ZPX-PCIE, MT9234ZPX-PCIE-NV
82100130L Rev. A
Copyright
This publication may not be reproduced, in whole or in part, without prior expressed
written permission from Multi-Tech Systems, Inc. All rights reserved.
Copyright © 2007 Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc. makes no representations or warranty with respect to the
contents hereof and specifically disclaims any implied warranty of merchantability or
fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc. reserves
the right to revise this publication and to make changes from time to time in the
content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or
organization of such revisions or changes. Check Multi-Tech’s Web site for current
versions of our product documentation.
Revision Date Description
A 12/28/07 Initial release.
Trademarks
Multi-Tech, MultiModem, and the Multi-Tech logo are registered trademarks of
Multi-Tech Systems, Inc. Windows 2000, 2003, XP, and Vista are registered
trademarks of Microsoft in the U.S. and other countires. All other brand and
product names mentioned in this publication are trademarks or registered
trademarks of their respective companies.
Patents
This Product is covered by one or more of the following U.S. Patent Numbers:
6151333, 5757801, 5682386, 5.301.274; 5.309.562; 5.355.365; 5.355.653;
5.452.289; 5.453.986;7082106;7082141;7092406. Other Patents Pending.
Technical Support
Country By Email By Phone
+763-717-5863
World Headquarters
Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, Minnesota 55112 U.S.A.
(763) 785-3500 or (800) 328-9717
Fax (763) 785-9874
http://www.multitech.com
MultiModem Quick Start Guide
Multi-Tech Systems, Inc. 3
Introduction
This guide shows you how to set up your MultiModem ZPX. For detailed
information, product specifications, troubleshooting tips, and more, see the User
Guide, available on your MultiModem CD.
Check Multi-Tech’s Web site for current versions of our product documentation.
Safety Warnings
•Use this product only with UL- and CUL-listed computers.
•To reduce the risk of fire, use only UL-listed 26 AWG (.41mm) or larger
telephone wiring.
•Never install telephone wiring during a lightning storm.
•Never install a telephone jack in a wet location unless the jack is specifically
designed for wet locations.
•Never touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected at the network interface.
•Use caution when installing or modifying telephone lines.
•Avoid using a telephone during an electrical storm; there is a risk of electrical
shock from lightning.
•Do not use a telephone in the vicinity of a gas leak.
•The telephone cord is to be disconnected before accessing the inside of the
equipment.
Package Contents
•One MultiModem ZPX
•One RJ11 telephone cable
•One printed Quick Start Guide
•One product CD
•One low profile mounting bracket (MT9234ZPX-PCIE models only)
Installing your MultiModem
Installing the MultiModem requires you to open your system. Please consult your
system manual in addition to the following instructions.
MT9234ZPX-UPCI
MT9234ZPX-PCIE
1. Turn off your system and unplug it. Failure to do so may result in damage to
both the MultiModem and your system. Do not turn on the system until the
instructions tell you to do so.
MultiModem Quick Start Guide
4 Multi-Tech Systems, Inc.
2. Remove the cover from your system as instructed in the system manual.
3. If you are installing a MT9234ZPX-PCIE board in a low profile machine, you
will have to change the mounting bracket to the low profile mounting bracket.
Refer to your User Guide for low profile mounting bracket details.
4. Select an empty PCI expansion slot. Remove the expansion slot cover and
save the retaining screw.
5. Before handling the MultiModem, discharge static in your body by touching a
bare piece of metal on the chassis. Carefully remove the MultiModem from its
antistatic bag, handling it only by the mounting bracket and edges. Do not
touch the gold-plated connectors along the bottom edge.
6. Look at the system’s main board to determine either PCI or Express
connector. Place the MultiModem directly above the expansion slot and
gently, but firmly, push it into the connector until the card’s retaining bracket
is flush against the system chassis.
7. Fasten the retaining bracket to the system chassis with the screw saved in
step 4.
8. Replace the system cover.
Making External Connections
Now, connect the MultiModem to the telephone line and, optionally, to your
telephone. For voice mail or speakerphone, you can also connect it to a
microphone and an external speaker, headphone, or sound card. The microphone
can be used for recording answering machine messages or for speakerphone use.
The speaker or headphone can be used for playing back messages or as a
speakerphone.
LINE
MI C
LINE
PH ONE
Optional Voice
MIC IN
LINE OUT
PHONE
LINE
MultiModem Quick Start Guide
Multi-Tech Systems, Inc. 5
Line Connection
Plug one end of the provided telephone cable into the modem’s LINE jack, and
the other end into a telephone wall jack. This is the only required connection.
Important: The LINE jack is not interchangeable with the PHONE jack. Do not
plug the phone into the LINE jack or the line cable into the PHONE jack.
Note: The Federal Communications Commission (FCC) and Industry
Canada impose certain restrictions on equipment connected to public
telephone systems.
Phone Connection (Optional)
If you wish to connect a telephone to the same line as the modem, plug
it into the modem PHONE jack. Important: The PHONE jack is not interchangeable
with the LINE jack. Do not plug the phone into the LINE jack or the line cable into
the PHONE jack.
Microphone/Headphone Connection (Optional)
For voice mail or speakerphone applications, plug an unamplified microphone into
the MIC jack. The microphone and headphone should have a stereo 3.58mm (9/64-
inch) mini plug. Do not use a monophonic microphone.
Installing the Modem Driver
The MT9234ZPX drivers need to be installed in your computer’s program directory.
The procedure will be different depending on the operating system. The first section
provides installation for the Vista Operating System. The second section provides
installation for Windows 2000 thru Windows XP Operating Systems. If you use a
Linux operating system, please refer to Appendix D in the User Guide for
installation instructions.
Vista Operating System
The MT9234ZPX driver installation is done in three parts, each directed by an
installation wizard. The three parts are: (1) installation of your PCI Serial Port, (2)
installation of the Communications Port, and (3) installation of the modem.
Preliminaries
1. Power up your computer.
2. Windows will detect that the new modem is present.
Driver Installation of your PCI Serial Port
3. The Found New Hardware screen appears with Windows needs to
install driver software for your PCI Serial Port.
MultiModem Quick Start Guide
6 Multi-Tech Systems, Inc.
Click on Locate and install driver software (recommended). Windows
will guide you through the process of installing driver software for your
device.
4. The next screen prompts you to insert the disc that came with your PCI
Serial Port. If you have the disc that came with your device, insert it now.
Windows will automatically search the disc for driver software.
Click Next.
5. Windows couldn’t find driver software for your device screen
appears. Choose Browse my computer for driver software
(advanced).
MultiModem Quick Start Guide
Multi-Tech Systems, Inc. 7
6. At the Browse for driver software on your computer screen, click the
Browse button.
7. Select the Drivers folder, and then the Vista folder on the product CD.
Click Next.
8. Searching D:\Drivers\Vista for software… screen appears.
9. When the software for this device has been successfully installed screen
appears with Windows has finished installing the driver software for this
device: Multi-Tech’s 1-Port PCI Analog Modem Card.
Click Close.
MultiModem Quick Start Guide
8 Multi-Tech Systems, Inc.
Installation of the Communications Port
10. The Found New Hardware – Multifunction Device screen appears with
Insert the disc that came with your Multifunction Device.
The MT9234ZPX-PCI product CD is still in the CDROM drive. Click Next.
11. At the Windows couldn’t find driver software for your device, click on
Browse my computer for driver software (advanced). Locate and
install driver software manually.
12. At the Browse for driver software on your computer screen, click the
Browse button and select the Drivers folder, then the Vista folder on the
product CD.
13. Click Next.
14. Installing driver software… activity screen appears.
15. Windows can’t verify the publisher of this driver software screen
appears.
MultiModem Quick Start Guide
Multi-Tech Systems, Inc. 9
Select Install this driver software anyway.
16. Installing driver software progress screen appears.
17. The software for this device has ben successfully installed screen
appears with Windows has finished installing the driver software for this
device: Multi-Tech Communications Port.
Click Close.
Installation of the Modem
18. The Found New Hardware – MultiTech Systems MT9234ZPX-PCIE
screen appears with Insert the disc that came with your MultiTech
Systems MT9234ZPX-PCIE.
The MT9234ZPX-PCI product CD is still in the CDROM drive. Click Next.
MultiModem Quick Start Guide
10 Multi-Tech Systems, Inc.
19. At the Windows couldn’t find driver software for your device, click on
Browse my computer for driver software (advanced). Locate and
install driver software manually.
20. At the Browse for driver software on your computer screen, click the
Browse button and select the Drivers folder, then the Vista folder on the
product CD.
21. Click Next.
22. Windows can’t verify the publisher of this driver software screen
appears.
Select Install this driver software anyway.
23. Installing driver software progress screen appears.
24. The software for this device has ben successfully installed screen
appears with Windows has finished installing the driver software for this
device: Multi-Tech Systems MT9234ZPX-PCIE.
25. Click Close. The installation of drivers is now complete.
Otros manuales para MultiModem MT9234ZPX-PCIE
1
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Módem de Multitech
Multitech
Multitech MTCBA-E-U Manual de usuario
Multitech
Multitech MultiModem II MT5600BA-V.92 Manual de usuario
Multitech
Multitech MultiConnect Cell 100 series Manual de usuario
Multitech
Multitech MultiMobile MT5634ZLX Manual de usuario
Multitech
Multitech MultiModemUSB MT5634ZBA-USB Manual de usuario
Multitech
Multitech MTC-MAT1-B01 Manual de usuario
Multitech
Multitech MultiConnect microCell MTCM2-L6G1 Manual de usuario
Multitech
Multitech Multimodem MTCBA-G-F1 Manual de usuario
Multitech
Multitech MTMMC-G-F1 Manual de instrucciones
Multitech
Multitech GPRS Manual de usuario
Multitech
Multitech MultiModem Manual de usuario
Multitech
Multitech MultiModem MT5600ZDX Manual de usuario
Multitech
Multitech MultiModem ZBA USB MT5634ZBA-USB Manual de usuario
Multitech
Multitech MTCBA-C-EN-N1 Manual de usuario
Multitech
Multitech MultiModem MT5656ZDX-V Manual de usuario
Multitech
Multitech MultiModem ISDN MT128ISA-UV Manual de usuario
Multitech
Multitech CommPlete MT3334HD8 Manual de usuario
Multitech
Multitech MT202TD Manual de usuario
Multitech
Multitech MultiModem II MT5600BA-V.92 Manual de usuario
Multitech
Multitech MT128STZLX Manual del operador
Manuales populares de Módem de otras marcas
US Robotics
US Robotics 3453C Manual de usuario
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario
Zte
Zte MF823 Manual de usuario
Four-Faith
Four-Faith F1403 Manual de usuario
Sierra Wireless
Sierra Wireless AIRLINK MP595W Manual de usuario
Gemtek
Gemtek WiMAX WIXFBR-103 Manual de usuario