Leica RUNNER 20 Manual de usuario

User Manual

English

Version 1.0

RUNNER 20/24

RUNNER 20/24-1.0.1en 2

This manual contains important safety directions (refer to section

"Safety directions") as well as instructions for setting up the

instrument and operating it.

Please read this User Manual carefully to achieve maximum

efficiency from your Instrument.

Congratulations on your purchase of a new Leica Geosystems

automatic level.

Automatic level

RUNNER 20/24-1.0.1en 3

The type of your product is indicated on the label on the bottom of

the base plate. The serial number is on the right side of your

product.

Write the type and serial number of your instrument in the space

provided below, and always quote this information when you need

to contact your agency or service workshop.

Type: Serial no.:

Product identification

RUNNER 20/24-1.0.1en 4

The symbols used in this User Manual have the following

meanings:

DANGER:

Indicates an imminently hazardous situation which, if not avoided,

will result in death or serious injury.

WARNING:

Indicates a potentially hazardous situation or an

unintended use which, if not avoided, could result in death or

serious injury.

CAUTION:

Indicates a potentially hazardous situation or an

unintended use which, if not avoided, may result in minor or

moderate injury and / or appreciable material, financial and

environmental damage.

Important paragraphs which must be adhered to in practice as they

enable the product to be used in a technically correct and efficient

manner.

Symbols used in this manual

RUNNER 20/24-1.0.1en 5

Introduction .......................................................................... 7

Measurement preparation ................................................ 10

Measuring ........................................................................... 14

Checking and adjusting .................................................... 19

Care and Storage ............................................................... 21

Safety Directions ............................................................... 24

Accessories ........................................................................ 31

Technical Data ................................................................... 32

Index.................................................................................... 33

View of chapters

RUNNER 20/24-1.0.1en 6

Contents

Introduction ............................................... 7

Special features ..................................... 7

Important parts ....................................... 8

Technical terms and abbreviations ........ 9

Measurement preparation ..................... 10

Unpacking ............................................ 10

Setting up the tripod............................. 11

Levelling up .......................................... 12

Focusing telescope .............................. 13

Centring ................................................ 13

Measuring ................................................ 14

Height reading ...................................... 14

Distance measuring ............................. 15

Angle measuring .................................. 15

Line levelling ........................................ 16

Area levelling ....................................... 17

Levelling total station measuring ......... 18

Levelled stakeout ................................. 18

Checking and adjusting ......................... 19

Tripod ................................................... 19

Circular level ........................................ 19

Checking and adjusting of

the line-of-sight .................................... 20

Care and Storage .................................... 21

Transport .............................................. 21

In the field ................................................ 21

Inside vehicle ........................................... 22

Shipping ................................................... 22

Storage ................................................. 22

Cleaning ............................................... 23

Safety Directions .................................... 24

Intended use of instrument .................. 24

Permitted uses ......................................... 24

Adverse uses ........................................... 24

Limits of use ......................................... 25

Responsibilities .................................... 26

Hazards of use ..................................... 27

Accessories ............................................. 31

Technical Data ........................................ 32

Index......................................................... 33

Contents

Introduction

RUNNER 20/24-1.0.1en 7

Introduction

The RUNNER 20/24 is a

member of a new generation of

construction levels.

Its innovative technology makes

the daily surveying jobs easier.

The instrument is ideally suited

for all applications of a reliable

and robust construction level.

The easy operation of the

instrument functions can be

quickly learned even by

inexperienced surveyors.

Special features

• Easy operation; quickly to

learn !

• Attractive design; low weight.

• Endless drive.

• Robust and reliable.

• Enables angle measurements

with horizontal circle.

• Resistant to water and dirt.

• Adaptable to all types of

tripods with 5/8" central fixing

screw.

BL-01

8Introduction

RUNNER 20/24-1.0.1en

Important parts

1 Endless drive (both sides)

2 Circular level

3 Knurled ring of adjustable

horizontal circle

4 Footscrew

5 Compensator test knob

6 Base plate

7 Objective

8 Optical sight with point

marking

9 Focusing knob

10 Eyepiece

11 Level prism

9 8

BL-02

Introduction

RUNNER 20/24-1.0.1en 9

Technical terms and abbreviations

Backsight/Foresight/

Intermediate sight

For determining the height

difference (∆H) between the

ground points A and B the back

sight (R) is measured first

followed by the forward sight

(V). Additional points relating to

A are measured as intermediate

sight (S).

Plumb line

By centring the circular level the

instrument is nearly levelled up.

A small instrument tilt remains

(the vertical axis tilt).

Compensator

The compensator in the

instrument is responsible for

compensating the vertical axis

tilt enabling an exactly horizontal

aiming.

BL-06

BL-04

Plumb line

Line-of-sight

RV/S

(∆H)

BL-05

Plumb line

Vertical

axis tilt

10 Measurement preparation

RUNNER 20/24-1.0.1en

1 Level

2 Allen key

3 User Manual

4 Protective cover

Remove RUNNER 20/24 from the case and check for

completeness:

Unpacking

Measurement preparation

BL-35

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Leica

Leica

Leica Lino L2 Manual de usuario

Leica

Leica Roteo 20HV Manual de usuario

Leica

Leica DISTO A6 Manual de usuario

Leica

Leica Rod Eye 180 Manual de usuario

Leica

Leica DISTO D410 Manual de usuario

Leica

Leica CS20 Manual de usuario

Leica

Leica RX1200 Manual de usuario

Leica

Leica TS15 Guía de configuración

Leica

Leica Builder Series Manual de usuario

Leica

Leica 3D Disto Manual de usuario

Leica

Leica PIPER 100 Manual de usuario

Leica

Leica GS20 Manual de usuario

Leica

Leica FlexLine Manual de usuario

Leica

Leica Lino P5 Manual de usuario

Leica

Leica Rugby 840 Manual de usuario

Leica

Leica ScanStation P50 Manual de usuario

Leica

Leica RTC360 Manual de usuario

Leica

Leica NA320 Manual de usuario

Leica

Leica PIPER 100 Manual de usuario

Leica

Leica Rugby 640G Manual de usuario

Leica

Leica LASER ALIGNMENT DIGICAT 100 Manual de usuario

Leica

Leica iCON gps 60 Manual de usuario

Leica

Leica 3D Disto Manual de usuario

Leica

Leica TS02 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario