Leica Sprinter 250M Manual de usuario

LEICA SPRINTER Quick Guide English

Instrument Components

a) Horizontal fine motion screw

b) Battery compartment

c) Circular level

d) Gunsight

e) Focusing knob

f) Handle

g) Eyepiece

h) LCD display

i) Base plate

j) Levelling footscrew

Operating Keys and Functions

*) when in Menu mode

Sprinter_01

Key Symbol 1st level funct. 2nd level funct.

On/Off Power On/Off

switch

NONE

MEAS Measuring

trigger key for

measuring

height and

distance

2nd function

(Continuous meas-

urement) with

prolong key press of

2 seconds

Height

/ Dist.

Alternating bet-

ween Height and

Distance display

Cursor up *

dH Height Differ-

ence measure-

ment and RL

computation

Cursor down *

MENU Activation and

selection of

settings

ENTER key for

confirmation

purpose *

Back-

light

LCD backlight

illumination

ESC key for termi-

nation of program or

setting *

Measurement Modes and Icons

Modes

Icons

Measurement

Height and Distance measurement

Symbol Mode

Measurement Mode

MENU selection Mode

Adjustment Mode

Tracking Mode

Icon Description

LCD backlight on

Staff upright measuring mode

Inverted Staff measuring mode

Different levels of LCD contrast display

(10% change per step)

Battery icon at various capacity (0%, 25%,

50%, 75%, 100%)

External power utilized *

Data stored to internal memory

MEAS

ADJ

TRK

Step Key Description

1. Press to switch on the instrument,

Leica logo is displayed follow by the

default measurement standby mode.

2. Aim at staff and focus. Lightly trigger

the measurement key to activate

measurement.

3. Height and distance measurement

are displayed.

1.235m

5.68

Reduced level, Height difference, Height and Distance measurement

In MENU setting (for SPRINTER 100M/200M):

• In submenu Recording > select Memory or Ext. if captured data to be stored.

• In submenu Input PtID > edit/input PtID as desired. Point ID only display when memory is ON.

Step Key Description

1. Press to start height difference and reduced level function.

2. Press, choose Input RL to change/input desired reference/benchmark level.

3. Press to complete input.

4. Aim at reference staff press key to initiate measurement.

5. Reference height & distance displayed follow by message Meas. Target!

6. Aim at target point press key again to display the result.

Display with active

internal memory

RL:

dH:

99.138

- 0.900 m

2.135 m

31.11 m

PtlD

2.135 m

31.11 m

99.138

- 0.900 m

RL:

dH:

MENU Setting

*) Applicable to SPRINTER 100M/200M only

740359-1.1.0en • Leica Geosystems AG • CH-9435 Heerbrugg (Switzerland) • Phone +41 71 727 31 31 • Fax +41 71 727 46 73 • www.leica-geosystems.com

No. Sub Menus Selections Descriptions

1. Input PtID * To input user point ID

2. Input Reduced

Level (RL)

Input for Benchmark value / Reference Reduced Level

3. Data

Manager *

View, Delete, Down-

load

Viewing of individual recorded data and deleting of specific measuring data,

Deleting of all data, Transferring of data via PC software.

4. Recording * Memory, External,

OFF

Data can be recorded in the internal memory of the instrument or externally to

the external device such as data collectors. If the recording is set OFF, then the

captured data will not be stored.

5. Adjustment None Adjustment program

6. Inverse Staff ON=Inverted mode

OFF=Upright mode

Setting of measurement to Inverted Staff. By default or on power on, the mode

is always set to OFF.

7. Contrast 10 levels of select. Optimum contrast setting for LCD display. Contrast is set to 50% ex factory.

8. Unit M, INT ft, US ft, Ft in

1/8in

Display Unit setting in meters, international feet, US feet, and ft in 1/8in

9. AutoOFF ON 15 min / OFF Power saving function. If set to ON 15 min, the instrument will switch off about

15 minutes after the last key press. In the case of OFF, the instrument will be

permanently switched on

10. Rounding Standard/Precise Standard = 0.001m / 0.01ft for height and 0.01m / 0.1ft for distance.

Precise = 0.0001m / 0.001 ft for height and 0.001m / 0.01 ft for distance.

In Ft in 1/8 inch; Precise/standard = ft-inch-1/8 inch for height & distance.

11. Beep ON/OFF Acoustic signal trigger key ON or OFF

12. RS232 * Baudrate

Parity

Stop Bit

Data Bit

1200, 2400, 4800, 9600, 19200, 38400

None, Odd, Even

1, 2

7, 8

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Leica

Leica

Leica DNA03 Manual de usuario

Leica

Leica DS2000 Manual de usuario

Leica

Leica Nova MS60 Manual de usuario

Leica

Leica TPS400 Series Manual de usuario

Leica

Leica FlexLine plus Manual de usuario

Leica

Leica 2700-B Manual de usuario

Leica

Leica Lino ML90 Manual de usuario

Leica

Leica RANGEMASTER CRF 1200 Manual de usuario

Leica

Leica AT930 Manual de usuario

Leica

Leica TS02 Manual de usuario

Leica

Leica PINMASTER II PRO Manual de usuario

Leica

Leica T105 Manual de usuario

Leica

Leica RANGEMASTER 1200 scan Manual de usuario

Leica

Leica Pinmaster Manual de usuario

Leica

Leica TPS1200 series Manual del producto

Leica

Leica DISTO E7500i Manual de usuario

Leica

Leica RANGEMASTER CRF 1200 Manual de instrucciones

Leica

Leica DISTO D410 Instrucciones de funcionamiento

Leica

Leica NA300 Series Manual de usuario

Leica

Leica TM30 Series Manual de usuario

Leica

Leica TS01 Manual de usuario

Leica

Leica Lino L2 Manual de usuario

Leica

Leica 3D Disto Manual de usuario

Leica

Leica FlexLine TS10 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario