Kramer DIP-20 Manual de usuario

DIP-20 Quick Start

P/N:

2900- 301071QS

Rev:

Scan for full manual

DIP-20 Quick Start Guide

This guide helps you install and use your DIP-20 for the first time.

Go to www.kramerav.com/downloads/DIP-20 to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

DIP-20 Automatic Video Switcher

1 Bracket set

4 Rubber feet

1 Power adapter (48V)

1 Quick start guide

Step 2: Mount DIP-20

Install DIP-20 using one of the following methods:

•Attach the rubber feet and place the unit on a flat surface.

•Fasten a bracket (included) on each side of the unit and attach it to a flat surface

(see www.kramerav.com/downloads/DIP-20).

•Mount the unit in a rack using the recommended rack adapter

(see www.kramerav.com/product/DIP-20).

•Ensure that the environment (e.g., maximum ambient temperature &

air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

•Maximum mounting height for the device is 2 meters.

Step 3: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your DIP-20. For best results, we recommend that you

always use Kramer high-performance cables to connect AV equipment to the DIP-20.

Step 4: Set DIP-switches

Video Switching Selection

DIP-switch 1 DIP-switch 2 Video Input Selection

DIP-switch 1

DIP-switch 2

Video Input Selection

Off (up)

Automatic—Last connected. Where more than one source is

connected the last one connected has priority

Off (up)

On (down)

Automatic—Priority selection.

HDMI 1 →HDMI 2 →PC IN (default, high to low priority)

On (down)

Off (up)

Manual

On (down)

Manual

Audio Switching Selection

DIP-switch 3

DIP-switch 4

Audio Input Selection

Off (up)

Automatic—Priority selection.

Embedded HDMI™→analog Audio In (high to low priority)

Off (up)

On (down)

Automatic—Priority selection.

Analog Audio In →embedded HDMI (high to low priority)

On (down)

Off (up)

Embedded HDMI

On (down)

Analog Audio In

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Step 5: Connect power

Connect the power cord to DIP-20 and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

Step 6: Operate DIP-20

Default IP Parameters

Parameter

Values

Default

Device Name

Any alphanumeric string up to 14 chars (can include hyphen, but not at the beginning or end)

KRAMER_

DHCP

ON/OFF

OFF

IP Address

Any valid IP address

192.168.1.39

Mask

Any valid network mask

255.255.0.0

Gateway

Any valid gateway address

192.168.0.1

TCP Port

0 to 65535

5000

UDP Port

0 to 65535

50000

Default RS-232 Communication Parameters

Parameter

Values

Baud Rate

115200

Data Bits

Stop Bits

Parity

None

Command Format

ASCII

Default Web Pages Logon Authentication

Parameter

Values

Name

Admin

Password

Admin

You can operate the DIP-20 via the front panel buttons, remote P3000 commands, or by using a Web browser to access the

built in Web pages.

Otros manuales para DIP-20

Tabla de contenidos

Otros manuales de Transmisor de Kramer

Kramer

Kramer KW-14T Manual de usuario

Kramer

Kramer F-121 Manual de usuario

Kramer

Kramer 650T Manual de usuario

Kramer

Kramer TP-202 Manual de usuario

Kramer

Kramer 691 Manual de usuario

Kramer

Kramer WP-789T Manual de usuario

Kramer

Kramer PT-2UT/R-KIT Manual de usuario

Kramer

Kramer WP-20 Manual de usuario

Kramer

Kramer SWT3-41-U-T Manual de usuario

Kramer

Kramer TP-145 Manual de usuario

Kramer

Kramer VP-300THD Manual de usuario

Kramer

Kramer WP-871xr Manual de usuario

Kramer

Kramer TP-121EDID Manual de usuario

Kramer

Kramer SID-VGA Manual de usuario

Kramer

Kramer PT-571HDCP Manual de usuario

Kramer

Kramer TP-210 Manual de usuario

Kramer

Kramer SID-X3N Manual de instalación y operación

Kramer

Kramer TP-185 Manual de usuario

Kramer

Kramer TP-121EDID Manual de usuario

Kramer

Kramer VP-200XLT Manual de usuario

Kramer

Kramer WP-580Txr Manual de usuario

Kramer

Kramer PT-571 Manual de usuario

Kramer

Kramer VP-5R Manual de usuario

Kramer

Kramer EXT3-C-WP-XR-T Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario