Kramer VP-26 Manual de usuario

Kramer Electronics, Ltd.

Preliminary

USER MANUAL

Model:

VP-26

Presentation Matrix Switcher

Contents

1Introduction 1

2Getting Started 1

2.1Quick Start 2

3Overview 3

3.1About the VP-26 3

3.2About the Power Connect™ Feature 4

3.3Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP) 4

3.4Recommendations for Achieving the Best Performance 5

3.5Terminology Used in this User Manual 5

4Your Presentation Matrix Switcher 5

5Installing the VP-26 on a Rack 11

6Connecting the VP-26 Presentation Matrix Switcher 12

6.1Connecting the VP-26 Rear Panel 12

6.2Connecting the Balanced/Unbalanced Stereo Audio Input/Output 15

6.3Wiring the CAT 5 LINE OUT RJ-45 Connector 15

6.4Connecting a PC 16

6.5Connecting via RS-485 16

6.6Controlling via ETHERNET 17

6.6.1Connecting the ETHERNET Port directly to a PC (Crossover Cable) 17

6.6.2Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable) 19

6.6.3Control Configuration via the Ethernet Port 19

6.7Controlling via RS-232 and RS-485 19

6.8DIP-switch Settings 21

6.8.1Setting the Machine # DIP-switches 21

7Operating Your Switcher 22

7.1The Front Panel Buttons 22

7.2The Independent Switchers AFV Mode 23

7.3The Master Audio Breakaway Mode 25

8Flash Memory Upgrade 26

8.1Switcher Flash Memory Upgrade 26

8.1.1Downloading from the Internet 26

8.1.2Connecting the PC to the RS-232 Port 26

8.1.3Upgrading Firmware 27

8.2Ethernet Flash Memory Upgrade 31

8.2.1Downloading from the Internet 32

8.2.2Connecting the PC to the RS-232 Port 32

8.2.3Upgrading Firmware 32

9Technical Specifications 34

10Hex Table 35

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Contents

10.1Audio Gain Control Hex Tables 36

11Communication Protocol 38

Figures

Figure 1: VP-26 Presentation Matrix Switcher – Front View 6

Figure 2: VP-26 Presentation Matrix Switcher – Rear View 8

Figure 3: VP-26 Presentation Switcher / Controller – Underside View 10

Figure 4: Connecting the VP-26 Presentation Matrix Switcher 14

Figure 5: Connecting a Balanced Stereo Audio Input/Output 15

Figure 6: Connecting an Unbalanced Stereo Audio Input 15

Figure 7: Connecting an Unbalanced Stereo Audio Output 15

Figure 8: CAT 5 PINOUT 15

Figure 9: Connecting a PC Without a null-modem Adapter 16

Figure 10: Controlling via RS-485 (for example, using an RC-3000) 17

Figure 11: Local Area Connection Properties Window 18

Figure 12: Internet Protocol (TCP/IP) Properties Window 18

Figure 13: Control Configuration via RS-232 and RS-485 20

Figure 14: Default DIP-switch Settings 21

Figure 15: Independent Switchers Mode 24

Figure 16: Switching in the Master Audio Mode 25

Figure 17: Switching to the MIC in the Master Audio Mode 25

Figure 18: Splash Screen 27

Figure 19: Atmel – Flip Window 27

Figure 20: Device Selection Window 28

Figure 21: Selecting the Device from the Selection Window 28

Figure 22: Loading the Hex 29

Figure 23: RS-232 Window 29

Figure 24: Atmel – Flip Window (Connected) 30

Figure 25: Atmel – Flip Window (Operation Completed) 31

Figure 26: The KFR-Programmer Window 32

Contents

iii

Tables

Table 1: Terminology Used in this User Manual 5

Table 2: Front Panel VP-26 Presentation Matrix Switcher Features 7

Table 3: Rear Panel VP-26 Presentation Matrix Switcher Features 9

Table 4: VP-26 Underside Panel Features 10

Table 5: CAT 5 PINOUT 15

Table 6: DIP-switch Settings 21

Table 7: Machine # DIP-switch Settings 21

Table 8: Technical Specifications of the VP-26 Presentation Switcher 34

Table 9: VP-26 Hex Table Video and Audio In-group IN-OUT 1 Selector 35

Table 10: VP-26 Hex Table Video and Audio In-group IN-OUT 2 Selector 35

Table 11: VP-26 Master Audio Selector Hex Table 36

Table 12: Set the Audio OUT 1 Gain Control for the Groups 36

Table 13: Set the Audio OUT 2 Gain Control for the Groups 36

Table 14: Set the Audio Output Gain Control for the Microphone 36

Table 15: Set the Audio Output Gain Control for the Master Audio 37

Table 16: Increase or Decrease the Audio Out 1 Gain by One Step 37

Table 17: Protocol Definitions 38

Table 18: Instruction Codes 39

Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast

range of problems that confront the video, audio, presentation, and

broadcasting professional on a daily basis. In recent years, we have

redesigned and upgraded most of our line, making the best even better! Our

1,000-plus different models now appear in 11 groups1that are clearly

defined by function.

Thank you for purchasing the Kramer VP-26 Presentation Matrix Switcher,

which is ideal for:

•Presentation and conference room systems

•Production studios

•Rental and staging

The package includes the following items:

•VP-26 Presentation Matrix Switcher

•Windows®-based Kramer control software

•Null-modem adapter and power cord2

•Kramer RC-IR3 Infrared Remote Control Transmitter (including

the required battery and a separate user manual3)

•This user manual3

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and

packaging materials for possible future shipment

•Review the contents of this user manual

•Use Kramer high performance high resolution cables4

1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems;

GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;

GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity;

GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products

2 We recommend that you use only the power cord that is supplied with this machine

3 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com

4 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Getting Started

2.1 Quick Start

This quick start chart summarizes the basic setup and operation steps.

Overview

3 Overview

This section describes:

•A summary of the VP-26, see section 3.1

•The power connect feature, see section 3.2

•Using shielded twisted pair (STP)/unshielded twisted pair (UTP), see

section 3.3

•Recommendations for achieving the best performance, see section 3.4

•The terminology used in this user manual, see section 3.5

3.1 About the VP-26

The VP-26 is a high quality one-box presentation matrix switcher, which

includes three independent 4x2 audio/video matrix switchers, one

independent 2x2 audio/video matrix switcher and a master audio switcher.

It combines the functions of a 4x2 matrix switcher for computer graphics

(VGA/UXGA) signals with audio, a 4x2 matrix switcher for composite

video and audio, a 4x2 matrix switcher for s-Video and audio, and a 2x2

matrix switcher for component video (Y, PB/CB,PR/CR) as well as the

master audio switcher that routes one of the pre-selected audio inputs (from

these four switchers) to two separate outputs.

In addition, the VP-26 features:

•A VGA/UXGA video bandwidth of 300MHz to ensure transparent

performance even in the most critical applications, and is HDTV

compatible

•A composite/SDI video bandwidth of 420MHz, an s-Video bandwidth

of 320MHz, a component video bandwidth of 380MHz, and a CAT 5

resolution of up to UXGA

•37 selector buttons, microphone input level control and master audio

level control

•Microphone talk-over mode (the microphone input signal lowers the

line audio output level when the connected microphone detects sound)

•A CAT 5 output, with a transmission range of more than 300 feet (over

100 meters) that transmits the OUT 2 VGA/UXGA video and audio

signals to a remote acceptor via a receiver

•An internal 5-Watt per channel (24kHz, 3dB), stereo power amplifier

for connecting the speakers directly to the machine

•A panel LOCK button to prevent tampering with the front panel

•Previous setup recall via the non-volatile memory after power up

•Changing the audio output levels via RS-232 commands

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Overview

Control the VP-26 using the front panel buttons, or remotely via:

•RS-485 or RS-232 serial commands transmitted by a touch screen

system, PC, or other serial controller

•The Kramer infrared remote control transmitter

•The ETHERNET

3.2 About the Power Connect™ Feature

The Power Connect feature means that only one unit in a system, the

transmitter or the receiver, needs to be connected to a power source when

the devices are within 150 feet (50 meters) of each other.

The Power Connect feature applies as long as the cable can carry power. The

distance does not exceed 50 meters on standard CAT 5 cable. For longer

distances, heavy-gauge cable should be used1.

For a CAT 5 cable exceeding a distance of 50 meters, separate power supplies

should be connected to the transmitter and to the receiver simultaneously.

3.3 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP)

We recommend that you use shielded twisted pair (STP) cable. There are

different levels of STP cable available, and we advise you to use the best

quality STP cable that you can afford. Our non-skew-free cable, Kramer

BC-STP is intended for digital signals and for analog signals where

skewing is not an issue. For cases where there is skewing, our UTP

skew-free cable, Kramer BC-XTP, may be used. Bear in mind, though, that

we advise using STP cables where possible, since the compliance to

electromagnetic interference was tested using those cables.

Although unshielded twisted pair (UTP) cable might be preferred for long

range applications, the UTP cable should be installed far away from electric

cables, motors and so on, which are prone to create electrical interference.

However, since the use of UTP cable might cause inconformity to

electromagnetic standards, Kramer does not commit to meeting the standard

with UTP cable.

1 CAT 5 cable is still suitable for the video/audio transmission, but not for feeding the power at these distances

Your Presentation Matrix Switcher

3.4 Recommendations for Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables1to avoid interference,

deterioration in signal quality due to poor matching, and elevated

noise levels (often associated with low quality cables).

•Avoid interference from neighboring electrical appliances that

may adversely influence signal quality and position your Kramer

VP-26 away from moisture, excessive sunlight and dust

3.5 Terminology Used in this User Manual

Table 1 defines some terms that are used in this user manual.

Table 1: Terminology Used in this User Manual

Term Definition

802.3 The standard specification for ETHERNET that is maintained by the Institute of Electrical

and Electronics Engineers (IEEE).

Dynamic Host

Configuration

Protocol (DHCP)

Allows the network administrator to distribute IP addresses from a central point and

automatically send a new IP address when an Ethernet point is plugged into a different

network location.

Gateway A network position serving as an entry to another network. On the Internet, a node or

stopping point can be either a gateway node or a host (end-point) node.

IP Address A 32-binary digit number that identifies each sender or receiver (within a network via a

particular server or workstation) of data (HTML pages or e-mails) that is sent in packets

across the Internet. Every device connected to an IP network must have a unique IP

address. This address is used to reference the specific unit.

Local Area Network

(LAN) Computers sharing a common communications line or wireless link, which often share a

server within a defined geographic area.

Media Access

Control (MAC)

Address

A computer's unique hardware number (or address) in a LAN or other network. On an

Ethernet LAN, the (MAC) address is identical to the Ethernet address.

Transmission

Control

Protocol/Internet

Protocol (TCP/IP)

The basic communication language or protocol of the Internet that breaks the message

into appropriately sized packets for the network, and can be used as a communications

protocol in an intranet or an extranet.

4 Your Presentation Matrix Switcher

Figure 1, Figure 2, Table 2 and Table 3 describe the front and rear panels of

the VP-26, respectively.

1 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your Presentation Matrix Switcher

Figure 1: VP-26 Presentation Matrix Switcher – Front View

Tabla de contenidos

Otros manuales de Conmutador de matriz de Kramer

Kramer

Kramer VS-48HN Manual de usuario

Kramer

Kramer 88DS Manual de usuario

Kramer

Kramer VS-88HN Manual de usuario

Kramer

Kramer 20-04400030 Manual de usuario

Kramer

Kramer XL 1616V2 Manual de usuario

Kramer

Kramer VP-88ETH Manual de usuario

Kramer

Kramer Sierra Video 84V3 Manual de usuario

Kramer

Kramer LASSEN XL 3232S Manual de usuario

Kramer

Kramer VS-626 Manual de usuario

Kramer

Kramer VS-62H Manual de usuario

Kramer

Kramer VS-88UHD Manual de usuario

Kramer

Kramer VP-4x4 Manual de usuario

Kramer

Kramer VP-2x2 Manual de usuario

Kramer

Kramer VP-729 Manual de usuario

Kramer

Kramer VS-44HN Manual de usuario

Kramer

Kramer XL 1616VS Manual de usuario

Kramer

Kramer VP-4x8 Manual de usuario

Kramer

Kramer VS-42H2 Manual de usuario

Kramer

Kramer VP-729 Manual de usuario

Kramer

Kramer Sierra Pro XL 1208V5S Manual de usuario

Kramer

Kramer VS-2042 Manual de usuario

Kramer

Kramer VP-88K Manual de usuario

Kramer

Kramer VS-48H Manual de usuario

Kramer

Kramer XL 1208V4S Manual de usuario

Manuales populares de Conmutador de matriz de otras marcas

Broadcast Tools

Broadcast Tools SS 8.2 Manual de usuario

Altimium

Altimium MATF32 Manual de usuario

ALFAtron

ALFAtron ALF-MUK44N Manual de usuario

Monoprice

Monoprice Blackbird 15377 Manual de usuario

PTN

PTN FMX12 Manual de usuario

CYP

CYP nT15GX01 Manual de usuario

TESmart

TESmart HMA0402A40 Manual de usuario

Octava

Octava HD4XSTPMX Manual de usuario

Intelix

Intelix FLX-88 Instrucciones de funcionamiento

Roland

Roland XS-1HD Manual de usuario

Atlona

Atlona AT-HDMI-22M Manual de usuario

Link

Link HD8X8 Manual de usuario

AMX

AMX AVS-OP-2020-117 Instrucciones y recetas

Lindy

Lindy 38042 Manual de usuario

Extron electronics

Extron electronics MTPX Plus Series Manual de usuario

Key Digital

Key Digital Champion KD-16x16CS Manual de usuario

Shinybow USA

Shinybow USA SB-8811 Manual de usuario

Optimus

Optimus Compact Manual de usuario