Kramer VS-62H Manual de usuario

P/N: 2900-300170 Rev 4 www.kramerAV.com

USER MANUAL

MODEL:

VS-62H

6x2 HDMI Matrix Switcher

Kramer Electronics Ltd. 
 
VS-62H –Contents 
i 
 
Contents 
Introduction 1 
Getting Started 1 
Overview 3 
Using the IR Transmitter 3 
Defining the VS-62H 6x2 HDMI Matrix Switcher 5 
Mounting VS-62H 7 
Connecting the VS-62H 6x2 HDMI Matrix Switcher 8 
Connecting a Serial Controller to the VS-62H via RS-232 9 
Connecting to the VS-62H via Ethernet 9 
Connecting the Remote Contact-closure Switches 11 
Wiring the RJ 45 Connectors 12 
Principles of Operation 13 
Automatic Signal Detection 13 
Input Switching Modes 13 
EDID Operation 14 
Step-in Functionality 14 
Operating the VS-62H 6x2 HDMI Matrix Switcher 15 
Switching an Input to an Output 15 
Acquiring an EDID from an Output 15 
Muting and Unmuting the Outputs 16 
Locking and Unlocking the Front Panel Buttons 16 
Generating a Test Pattern 17 
Configuring and Maintaining the VS-62H 18 
Setting the DIP-switches 18 
Resetting the VS-62H to Factory Default Settings 18 
Upgrading the Firmware 19 
Operating the VS-62H Remotely via the Web Pages 20 
Browsing the VS-62H Web Pages 20 
Routing Page 21 
EDID Page 25 
Device Setting Page 26 
Firmware Upgrade Page 27 
About Us Page 27 
Technical Specifications 28 
Default Communication Parameters 29 
Default EDID 30 
Protocol 3000 32 
Understanding Protocol 3000 32 
Protocol 3000 Commands 33 
Result and Error Codes 47 

Kramer Electronics Ltd.

VS-62H –Introduction

Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world

of unique, creative, and affordable solutions to the vast range of problems that confront the

video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we

have redesigned and upgraded most of our line, making the best even better!

Congratulations on purchasing your Kramer VS-62H 6x2 HDMI Matrix Switcher which is

ideal for the following typical applications:

•Conference rooms

•Education

•Hospitality

Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging materials for

possible future shipment.

•Review the contents of this user manual.

Go to www.kramerav.com/downloads/VS-62H to check for up-to-date user manuals,

application programs, and to check if firmware upgrades are available (where appropriate).

Achieving the Best Performance

•Use only good quality connection cables (we recommend Kramer high-performance,

high-resolution cables) to avoid interference, deterioration in signal quality due to poor

matching, and elevated noise levels (often associated with low quality cables).

•Do not secure the cables in tight bundles or roll the slack into tight coils.

•Avoid interference from neighboring electrical appliances that may adversely influence

signal quality.

•Position your Kramer VS-62H away from moisture, excessive sunlight and dust.

Kramer Electronics Ltd.

VS-62H –Introduction

Safety Instructions

Caution:

•This equipment is to be used only inside a building. It may only be connected to other

equipment that is installed inside a building.

•For products with relay terminals and GPI\O ports, please refer to the permitted rating

for an external connection, located next to the terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•To ensure continuous risk protection, replace fuses only according to the rating

specified on the product label which located on the bottom of the unit.

Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce

the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected

and recycled. To comply with the WEEE Directive, Kramer Electronics has made

arrangements with the European Advanced Recycling Network (EARN) and will cover any

costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on

arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular

country go to our recycling pages at www.kramerav.com/support/recycling.

Kramer Electronics Ltd.

VS-62H –Overview

Overview

The VS-62H is a high quality, 6x2 matrix switcher for HDMI™signals. It reclocks and

equalizes the signals and can route any input to either or both outputs simultaneously.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

In particular, the VS-62H features:

•Up to 8.91Gbps data rate (2.97Gbps per graphics channel).

Suitable for resolutions up to UXGA and 4K x 2K

•Support for HDCP (High Definition Digital Content Protection).

•True video clock detection.

•Automatic switching modes (last connected and priority switching).

•HDMI Support –3D, Deep Color, x.v.Color™, Lip Sync, Dolby® TrueHD, Dolby Digital

Plus, DTS−HD®, and 7.1 multi-channel audio.

•I-EDIDPro™ Kramer Intelligent EDID Processing™ –Intelligent EDID handling &

processing algorithm ensures Plug and Play operation for HDMI systems.

•Programmable step-in functionality when used in conjunction with compatible step-in

devices, such as the SID-X3N and DIP-31 (using an HDMI cable that supports HEC, the

HDMI Ethernet Channel).

•Non-volatile EDID storage.

•Kramer reKlocking™ & Equalization Technology that rebuilds the digital signal to travel

longer distances.

•Static or dynamic DHCP IP addressing.

•Embedded Web pages that provide remote configuration and operation.

•A lock button to prevent unwanted tampering with the buttons on the front panel.

•Support for Kramer Protocol 3000.

You can control the VS-62H using the front panel buttons, or remotely via:

•RS-232 serial commands transmitted by a PC, touch screen system or other serial

controller.

•The Kramer RC-IR3 infrared, remote control transmitter.

•A PC connected via a LAN to the Ethernet port on the VS-62H.

•An optional, external, remote IR receiver (see Using the IR Transmitter on page 3).

Using the IR Transmitter

You can use the RC-IR3 IR transmitter to control the machine via the built-in IR receiver on

the front panel or, instead, via an optional external IR receiver (for example, P/N C-

A35M/IRR-50). The external IR receiver can be located up to 15m away from the machine.

Kramer Electronics Ltd.

VS-62H –Overview

This distance can be extended to up to 60m when used with three extension cables (for

example, P/N C-A35M/A35F-50).

Before using the external IR receiver, be sure to arrange for your Kramer dealer to insert the

internal IR connection cable (for example, P/N: 505-70434010-S) with the 3.5mm connector

that fits into the REMOTE IR opening on the rear panel. Connect the external IR receiver to

the REMOTE IR 3.5mm connector.

Kramer Electronics Ltd.

VS-62H –Defining the VS-62H 6x2 HDMI Matrix Switcher

Defining the VS-62H 6x2 HDMI

Matrix Switcher

Figure 1 defines the front panel of the VS-62H.

Figure 1: VS-62H 6x2 HDMI Matrix Switcher Front Panel

Feature

Function

IR LED

Lights yellow when receiving an IR signal.

IR Sensor

Signal receiver for the infrared remote control transmitter.

INPUT

SELECTOR

Buttons

TO OUT 2 1~6

Press one of the six inputs to switch it to Output 2

(see Switching an Input to an Output on page 15) .

Press the currently selected input button to mute the output.

TO OUT 1 1~6

Press one of the six inputs to switch it to Output 1

Press the currently selected input button to mute the output.

MUTE Button

Press to toggle mute of both output signals (see Muting and

Unmuting the Output on page 16).

EDID Button

Press to capture the EDID (see Acquiring an EDID on page 15).

ON LED

Lights green when the device is powered on.

LOCK Button

Press and hold to lock the front panel buttons. Press and hold

again to unlock (see Locking and Unlocking the Front Panel

Buttons on page 16).

FUNCTION Button

Press to activate the test pattern generator. When the

generator is active, press one of the input buttons to select a

test pattern.

Kramer Electronics Ltd.

VS-62H –Defining the VS-62H 6x2 HDMI Matrix Switcher

Figure 2 defines the rear panel of the VS-62H.

Figure 2: VS-62H 6x2 HDMI Matrix Switcher Rear Panel

Feature

Function

REMOTE IR Opening

Connect to an external IR receiver for controlling the device

via an IR remote controller (see Using the IR

Transmitter on page 3).

Covered by a cap. The 3.5mm mini jack at the end of the internal IR connection cable fits into this opening

REMOTE

INPUT To OUT 1

6-pin Terminal Block

Connect to up to six remote, contact-closure input selection

switches for Output 1 (see Connecting the Remote Contact-

closure Switches on page 11)

INPUT To OUT 2

6-pin Terminal Block

Connect to up to six remote, contact-closure input selection

switches for Output 2

RS-232 3-pin Terminal Block

Connect to a PC/serial controller (see Connecting a Serial

Controller to the VS-62H via RS-232 on page 9)

SETUP 8-way DIP-switch

Sets the device configuration (see Setting the DIP-

switch on page 18)

PROG VIA USB Connector

Connect to a PC to upgrade the firmware (see Upgrading the

Firmware on page 19)

PROG VIA RS-232 Upgrade Switch

Depress to upgrade the firmware via the RS-232 port, release

for normal operation

ETHERNET RJ-45 Connector

Connect to a PC via a LAN (see Connecting to the VS-62H

via Ethernet on page 9)

RESET Switch

Press while power-cycling the device to reset to factory

default parameters (see Default Communication

Parameters on page 29)

5V DC Connector

Connect to the power adapter, center pin positive

INPUT 1~6 HDMI Input Connectors

Connect to up to six HDMI sources (see Connecting the

VS-62H 6x2 HDMI Matrix Switcher on page 8)

OUT 1 and OUT 2 HDMI Output

Connectors

Connect to up to two HDMI acceptors

Kramer Electronics Ltd.

VS-62H –Mounting VS-62H

Mounting VS-62H

This section provides instructions for mounting VS-62H. Before installing, verify that the

environment is within the recommended range:

•Operation temperature –0to 40C (32 to 104F).

•Storage temperature –-40to +70C (-40 to +158F).

•Humidity –10% to 90%, RHL non-condensing.

•VS-62H must be placed upright in the correct horizontal position.

Caution:

•Mount VS-62H before connecting any cables or power.

Warning:

•Ensure that the environment (e.g., maximum ambient temperature & air flow) is

compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be used for avoiding

overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

To mount the VS-62H on a table or shelf

•Attach the rubber feet and place the unit on a flat surface.

•Fasten a bracket (included) on each side of the unit and attach it to

a flat surface.

For more information go to www.kramerav.com/downloads/VS-62H

Kramer Electronics Ltd.

VS-62H –Connecting the VS-62H 6x2 HDMI Matrix Switcher

Connecting the VS-62H 6x2 HDMI

Matrix Switcher

Always switch off the power to each device before connecting it to your VS-62H. After

connecting your VS-62H, connect its power and then switch on the power to each device.

Figure 3: Connecting the VS-62H 6x2 HDMI Matrix Switcher

To connect the VS-62H 6x2 HDMI Matrix Switcher as illustrated in the example in Figure 3:

1. Connect up to six HDMI sources, (for example, Blu-ray Disc players) to the HDMI Input

connectors.

2. Connect the two OUT HDMI connectors to up to two HDMI acceptors, (for example, LCD

displays with built-in speakers).

3. If required, connect a PC/controller to the RS-232 port (see Connecting a Serial

Controller to the VS-62H via RS-232 on page 9) and/or the Ethernet port (see

Connecting to the VS-62H via Ethernet on page 9).

4. Connect the power adapter to the device and plug the power adapter into the mains

electricity (not shown in Figure 3).

5. If required, acquire the EDID (see Switching an Input to an Output on page 23).

Otros manuales para VS-62H

Tabla de contenidos

Otros manuales de Conmutador de matriz de Kramer

Kramer

Kramer VP-885 Manual de usuario

Kramer

Kramer VS-1616DN-EM Manual de usuario

Kramer

Kramer 1616HDEE Manual de usuario

Kramer

Kramer VS-3232A Manual de usuario

Kramer

Kramer VS-44H2 Manual de usuario

Kramer

Kramer VS-1616D Manual de usuario

Kramer

Kramer VS-88HD Manual de usuario

Kramer

Kramer Sierra Video 4832V5Sxl Manual de usuario

Kramer

Kramer VS-402XL Manual de usuario

Kramer

Kramer VS-88DT Manual de usuario

Kramer

Kramer 1616DS Manual de usuario

Kramer

Kramer VS-88HN Manual de usuario

Kramer

Kramer 88HD Manual de usuario

Kramer

Kramer VP-4x4K Manual de usuario

Kramer

Kramer VP-88ETH Manual de usuario

Kramer

Kramer VS-88DVI Manual de usuario

Kramer

Kramer Sierra Video 6448V5Sxl Manual de usuario

Kramer

Kramer VS-88HDxl Manual de usuario

Kramer

Kramer VP-32x1 Manual de usuario

Kramer

Kramer VS-1616DN-MD Manual de usuario

Kramer

Kramer 88V3S Manual de usuario

Kramer

Kramer 88V3 Manual de usuario

Kramer

Kramer VP-747 Manual de usuario

Kramer

Kramer Sierra Video 3264V5Sxl Manual de usuario

Manuales populares de Conmutador de matriz de otras marcas

Broadcast Tools

Broadcast Tools SS 8.2 Manual de usuario

Altimium

Altimium MATF32 Manual de usuario

ALFAtron

ALFAtron ALF-MUK44N Manual de usuario

Monoprice

Monoprice Blackbird 15377 Manual de usuario

PTN

PTN FMX12 Manual de usuario

CYP

CYP nT15GX01 Manual de usuario

TESmart

TESmart HMA0402A40 Manual de usuario

Octava

Octava HD4XSTPMX Manual de usuario

Intelix

Intelix FLX-88 Instrucciones de funcionamiento

Roland

Roland XS-1HD Manual de usuario

Atlona

Atlona AT-HDMI-22M Manual de usuario

Link

Link HD8X8 Manual de usuario

AMX

AMX AVS-OP-2020-117 Instrucciones y recetas

Lindy

Lindy 38042 Manual de usuario

Extron electronics

Extron electronics MTPX Plus Series Manual de usuario

Key Digital

Key Digital Champion KD-16x16CS Manual de usuario

Shinybow USA

Shinybow USA SB-8811 Manual de usuario

Optimus

Optimus Compact Manual de usuario