Keysight Technologies E4417A Manual de usuario

Keysight Technologies

E4416A/4417A Power

Meters

Service Guide

2 Keysight E4416A/E4417A Power Meters Service Guide

Notices

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies as governed by

United States and international

Manual Part Number

E4416-90014

Edition

Edition 14, January 8, 2016

Printed in:

Printed in Malaysia

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance with

the terms of such license.

Declaration of Conformity

Declarations of Conformity for this

product and for other Keysight

products may be downloaded from the

Web.

You can then search by

product number to find the latest

Declaration of Conformity.

U.S. Government Rights

The Software is “commercial computer

software,” as defined by Federal

Acquisition Regulation (“FAR”) 2.101.

Pursuant to FAR 12.212 and 27.405-3

and Department of Defense FAR

Supplement (“DFARS”) 227.7202, the

U.S. government acquires commercial

computer software under the same

terms by which the software is

customarily provided to the public.

Accordingly, Keysight provides the

Software to U.S. government

customers under its standard

commercial license, which is embodied

in its End User License Agreement

(EULA)

The license set forth in the

EULA represents the exclusive authority

by which the U.S. government may use,

modify, distribute, or disclose the

Software. The EULA and the license set

forth therein, does not require or

permit, among other things, that

Keysight: (1) Furnish technical

information related to commercial

computer software or commercial

computer software documentation that

is not customarily provided to the

public; or (2) Relinquish to, or

otherwise provide, the government

rights in excess of these rights

customarily provided to the public to

use, modify, reproduce, release,

perform, display, or disclose

commercial computer software or

commercial computer software

documentation. No additional

government requirements beyond

those set forth in the EULA shall apply,

except to the extent that those terms,

rights, or licenses are explicitly required

from all providers of commercial

computer software pursuant to the FAR

and the DFARS and are set forth

specifically in writing elsewhere in the

EULA. Keysight shall be under no

obligation to update, revise or

otherwise modify the Software. With

respect to any technical data as

defined by FAR 2.101, pursuant to FAR

12.211 and 27.404.2 and DFARS

227.7102, the U.S. government

acquires no greater than Limited Rights

as defined in FAR 27.401 or DFAR

227.7103-5 (c), as applicable in any

technical data.

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,” AND

IS SUBJECT TO BEING CHANGED,

WITHOUT NOTICE, IN FUTURE

EDITIONS. FURTHER, TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE

LAW, KEYSIGHT DISCLAIMS ALL

WARRANTIES, EITHER EXPRESS OR

IMPLIED, WITH REGARD TO THIS

MANUAL AND ANY INFORMATION

CONTAINED HEREIN, INCLUDING BUT

NOT LIMITED TO THE IMPLIED

WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR

PURPOSE. KEYSIGHT SHALL NOT BE

LIABLE FOR ERRORS OR FOR

INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFORMANCE

OF THIS DOCUMENT OR OF ANY

INFORMATION CONTAINED HEREIN.

SHOULD KEYSIGHT AND THE USER

HAVE A SEPARATE WRITTEN

AGREEMENT WITH WARRANTY TERMS

COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH

THESE TERMS, THE WARRANTY TERMS

IN THE SEPARATE AGREEMENT SHALL

CONTROL.

Safety Information

CAUTION

A CAUTION notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that, if

not correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not

proceed beyond a CAUTION notice

until the indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that, if

not correctly performed or adhered to,

could result in personal injury or death.

Do not proceed beyond a WARNING

notice until the indicated conditions are

fully understood and met.

Keysight E4416A/E4417A Power Meters Service Guide 3

Certification

Keysight Technologies certifies that this product met its published specifications

at the time of shipment from the factory. Keysight Technologies further certifies

that its calibration measurements are traceable to the United States National

Institute of Standards and Technology, to the extent allowed by the Institute’s

calibration facility, and to the calibration facilities of other International Standards

Organization members.

Warranty

This Keysight Technologies instrument product is warranted against defects in

material and workmanship for a period of one year from date of shipment. During

the warranty period, Keysight Technologies will at its option, either repair or

replace products which prove to be defective. For warranty service or repair, this

product must be returned to a service facility designated by Keysight

Technologies. Buyer shall prepay shipping charges to Keysight Technologies and

Keysight Technologies shall pay shipping charges, duties, and taxes for products

returned to Keysight Technologies from another country. Keysight Technologies

warrants that its software and firmware designated by Keysight Technologies for

use with an instrument will execute its programming instructions when properly

installed on that instrument. Keysight Technologies does not warrant that the

operation of the instrument, or firmware will be uninterrupted or error free.

4 Keysight E4416A/E4417A Power Meters Service Guide

Limitation of Warranty

The foregoing warranty shall not apply to defects resulting from improper or

inadequate maintenance by Buyer, Buyer-supplied software or interfacing,

unauthorized modification or misuse, operation outside of the environmental

specifications for the product, or improper site preparation or maintenance. NO

OTHER WARRANTY IS EXPRESSED OR IMPLIED. KEYSIGHT TECHNOLOGIES

SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE.

Exclusive Remedies

THE REMEDIES PROVIDED HEREIN ARE BUYER’S SOLE AND EXCLUSIVE

REMEDIES. KEYSIGHT TECHNOLOGIES SHALL NOT BE LIABLE FOR ANY DIRECT,

INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER

BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL THEORY.

Warnings and Cautions

This guide uses warnings and cautions to denote hazards.

WARNING

A warning calls attention to a procedure, practice or the like, which, if not

correctly performed or adhered to, could result in injury or the loss of life. Do

not proceed beyond a warning until the indicated conditions are fully

understood and met.

CAUTION

A caution calls attention to a procedure, practice or the like which, if not

correctly performed or adhered to, could result in damage to or the

destruction of part or all of the equipment. Do not proceed beyond a caution

until the indicated conditions are fully understood and met.

Keysight E4416A/E4417A Power Meters Service Guide 5

Safety Symbols

The following symbol on the instrument and in the documentation indicates

precautions that must be taken to maintain safe operation of the instrument.

Caution, risk of danger.

The Instruction Documentation Symbol. The product is marked with this symbol

when it is necessary for the user to refer to the instructions in the supplied

documentation.

Alternating current (AC).

This symbol indicates the operating switch for ‘Stand-by’ mode. Note, the

instrument is NOT isolated from the mains when the switch is pressed.

To isolate the instrument, the mains coupler (mains input cord) should be removed

from the power supply.

This symbol indicates the operating switch for ‘On’ mode).

External Protective Earth Terminal.

While this is a Class I product, provided with a protective earthing

conductor in a power cord, an external protective earthing terminal has also been

provided. This terminal is for use where the earthing cannot be assured. At least an

18AWG earthing conductor should be used in such an instance, to ground the

instrument to an assured earth terminal.

6 Keysight E4416A/E4417A Power Meters Service Guide

Personal Safety Considerations

This is a Safety Class I product (provided with a protective earthing ground

incorporated in the power cord). The mains plug shall only be inserted in a socket

outlet provided with a protective earth contact. Any interruption of the protective

conductor, inside or outside the instrument, is likely to make the instrument

dangerous. Intentional interruption is prohibited

General Safety Considerations

WARNING

If this instrument is not used as specified, the protection provided by the

equipment could be impaired. This instrument must be used in a normal

condition (in which all means of protection are intact) only.

No operator serviceable parts inside. Refer servicing to qualified personnel.

To prevent electrical shock, do not remove covers.

For continued protection against fire hazard, replace the line fuse(s) only

with fuses of the same type and rating (for example, normal blow, time delay,

etc.). The use of other fuses or material is prohibited.

WARNING

Before this instrument is switched on, make sure it has been properly

grounded through the protective conductor of the ac power cable to a

socket outlet provided with protective earth contact.

Any interruption of the protective (grounding) conductor, inside or outside

the instrument, or disconnection of the protective earth terminal can result

in personal injury.

CAUTION

Any adjustments or service procedures that require operation of the

instrument with protective covers removed should be performed only by

trained service personnel.

Keysight E4416A/E4417A Power Meters Service Guide 7

Regulatory Markings

The CE mark shows that the product complies with all the relevant European legal

Directives (if accompanied by a year, it signifies when the design was proven.

This ISM device complies with Canadian ICES-001.

Cet appareil ISM est conforme à la norme NMB-001 du Canada.

This is the symbol of an Industrial Scientific and Medical Group 1 Class A product.

The CSA mark is a registered trademark of the Canadian Standards Association.

8 Keysight E4416A/E4417A Power Meters Service Guide

IEC 1010-1 Compliance

This instrument has been designed and tested in accordance with IEC Publication

1010-1 +A1:1992 Safety Requirements for Electrical Equipment for Measurement,

Control and Laboratory Use and has been supplied in a safe condition. The

instruction documentation contains information and warnings which must be

followed by the user to ensure safe operation and to maintain the instrument in a

safe condition.

Recommended Calibration Interval

Keysight Technologies recommends a two-year calibration cycle for the E4416A

and E4417A power meter.

10 Keysight E4416A/E4417A Power Meters Service Guide

Returning Your Power Meter for Service

Use the information in this section if you need to return your power meter to

Keysight Technologies.

Package the Power Meter for Shipment

Use the following steps to package the power meter for shipment to Keysight

Technologies for service:

1. Fill in a blue service tag (available at the end of this guide) and attach it to the

power meter. Please be as specific as possible about the nature of the

problem. Send a copy of any or all of the following information:

– Any error messages that appeared on the power meter display.

– Any information on the performance of the power meter.

2. Use the original packaging materials or a strong shipping container that is

made of double-walled, corrugated cardboard with 159 kg (350 lb) bursting

strength. The carton must be both large enough and strong enough to

accommodate the power meter and allow at least 3 to 4 inches on all sides of

the power meter for packing material.

CAUTION

Power meter damage can result from using packaging materials other than

those specified. Never use styrene pellets in any shape as packaging

materials. They do not adequately cushion the power meter or prevent it

from shifting in the carton. Styrene pellets cause power meter damage by

generating static electricity and by lodging in the rear panel.

Keysight E4416A/E4417A Power Meters Service Guide 11

3. Surround the power meter with at least 3 to 4 inches of packing material, or

enough to prevent the power meter from moving in the carton. If packing foam

is not available, the best alternative is SD-240 Air Cap TM from Sealed Air

Corporation (Commerce, CA 90001). Air Cap looks like a plastic sheet covered

with 1-1/4 inch air filled bubbles. Use the pink Air Cap to reduce static

electricity. Wrap the power meter several times in the material to both protect

the power meter and prevent it from moving in the carton.

4. Seal the shipping container securely with strong nylon adhesive tape.

5. Mark the shipping container "FRAGILE, HANDLE WITH CARE" to ensure careful

handling.

6. Retain copies of all shipping papers.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Keysight Technologies

Keysight Technologies

Keysight Technologies U4431A Manual de usuario

Keysight Technologies

Keysight Technologies EXA N9010B Manual de instalación y operación

Keysight Technologies

Keysight Technologies N432A Manual de usuario

Keysight Technologies

Keysight Technologies N4373E Manual de usuario

Keysight Technologies

Keysight Technologies N8480 Series Manual de servicio

Keysight Technologies

Keysight Technologies NFA X-Series Manual de usuario

Keysight Technologies

Keysight Technologies N9040B Manual de instalación y operación

Keysight Technologies

Keysight Technologies N6705C Manual de servicio

Keysight Technologies

Keysight Technologies E5072A Manual de usuario

Keysight Technologies

Keysight Technologies E4980A Manual del operador

Keysight Technologies

Keysight Technologies N5241B Manual de instalación y operación

Keysight Technologies

Keysight Technologies B1500A Guía de instalación

Keysight Technologies

Keysight Technologies X Series Manual de usuario

Keysight Technologies

Keysight Technologies S9106AC-2IF Guía del usuario

Keysight Technologies

Keysight Technologies FieldFox N9913A Manual de usuario

Keysight Technologies

Keysight Technologies N5221B Manual de usuario

Keysight Technologies

Keysight Technologies InfiniiMax III Series Manual de usuario

Keysight Technologies

Keysight Technologies U2020 X Series Manual de usuario

Keysight Technologies

Keysight Technologies N5290/1A PNA Series Manual de usuario

Keysight Technologies

Keysight Technologies FieldFox N9927-90002 Manual de usuario

Keysight Technologies

Keysight Technologies P939 A Series Manual de usuario

Keysight Technologies

Keysight Technologies EPM-P Series Instrucciones de funcionamiento

Keysight Technologies

Keysight Technologies E5061B ENA Series Manual de usuario

Keysight Technologies

Keysight Technologies U4301 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario