Jbc CL9885 Manual de usuario

TIP CLEANNING

RANGE

www.jbctools.com

2

CL9885 / TIP CLEANING RANGE

Very effective

cleaning method.

Leaves a small

layer of solder on

the tip preventing

oxidation between

cleaning and

rewetting.

Wet cleaning method

Very soft and

temperature resistant

receptacle allows

tapping and wiping of

the tip to eliminate the

excess of solder

Inox wool stronger cleaning

method than brass wool.

The metal brush differs from the

cleaning wool in that it is a little

bit more agressive on the tip.

It therefore cleans the tip very

well but it should be used

gently.

A long proven method of

chemically cleaning and

retinning at the same time.

It should be used when the

above methods fail and a very

active cleaning method is

needed.

CL6205 INOX WOOL CL6220 BRUSHES TT-A TIP TINNER-CLEANER

The most complete cleaning accesory, allows you to choose between 3 diferent cleaning methods, metallic

wool, metal brush and sponge.Use the integrated wiper to remove the excess of solder from the tip, you

can tap the tip on the wiper proﬁle or you can wipe any posible particle sticked on the tip using the slots.

Due to its weight and antislip bumpers, it is totally self portable, there is no need to hold with a hand while

you are cleaning the tip.

CL6210 BRASS WOOL

S0354 SPONGE

CL0236 WIPER

OPTIONAL

1 1

3 3

2 2

4 4

3

WOOL REPLACEMENT METALLIC BRUSH

REPLACEMENT

Wiper can be easily

removed to clean it.

TAPPING WIPPING

CL6220 Brushes

CL0354 Sponge

CL6210 Brass wool

CL6205 Inox wool

CL0236 TIP WIPER

WARRANTY

JBC’s 2 years warranty guarantees this equipment against all manu-

facturing defects, covering the replacement of defective parts and

all necessary labour.

Warranty does not cover product wear due to use or mis-use.

In order for the warranty to be valid, equipment must be returned,

postage paid, to the dealer where it was purchased enclosing this

fully ﬁlled in, sheet.

www.jbctools.com

SERIAL Nº

STAMP OF DEALER

DATE OF PURCHASE

0006349-0412

This product should not be

thrown in the garbage.

Otros manuales para CL9885

3

Manuales populares de Pistola de soldar de otras marcas

Bakon

Bakon 3200 Manual de usuario

Proxxon

Proxxon Gaslotset MGS Manual de usuario

HAKO

HAKO FX-8804 Manual de usuario

SATA

SATA 02002A Manual de usuario

Velleman

Velleman HRJA151 Manual de usuario

Weller

Weller WSM 1 Manual de usuario

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Instrucciones de montaje

ersa

ersa i-CON 1V Manual de usuario

Hakko Electronics

Hakko Electronics FX-100 Manual de usuario

Weller

Weller WAD 101 Manual de usuario

Weller

Weller WXD 2 Manual de usuario

AlienTek

AlienTek T100 Manual de usuario

Atten

Atten ATETOOL AT-689A Manual de usuario

Surtek

Surtek 112554 Dimensiones y guía de instalación

Parkside

Parkside PLBS 30 A1 Manual de usuario

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Manual de usuario

Weller

Weller WX1 Manual de usuario

multicomp pro

multicomp pro MP740893 Manual de usuario