Jbc CTS Manual de usuario

INSTRUCTION MANUAL

CTS

Solder Pot Stand

Solder Pot Stand ................................................................................................................................................1 unit

Handle and Cartridge are not included

Spatula 17mm / 0.67in ........................... 1 unit

Ref. 0018606

Tray ................................................................. 1 unit

already assembled to the stand

Spacers ....................................................... 1 pair

Ref. 0029883

Allen Key Ø 2mm / 0.08in .................... 1 unit

already assembled to the stand

Spatula 39mm / 1.54in .......................... 1 unit

Ref. 0018607

Manual ........................................................... 1 unit

Ref. 0029403

Packing List

The following items are included:

This manual corresponds to the following reference:

CT-SA

Handle Range Cartridge

Ref. A B C

T470 C470-SP01 18mm

0,710in

15mm

0.591in

10mm

0.394in

T470 C470-SP42 40mm

1.575in

40mm

1.575in

10mm

0.394in

T245 C245-SP01 18mm

0,710in

15mm

0.591in

10mm

0.394in

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

CTS can be employed with different handles and

cartridges.

T470 handles can be used with solder pot

cartridges C470SP01 and C470SP42 and T245

handles with solder pot cartridge C245SP01.

Features Quick Release Screw

Screw holes for

mounting on

workbench

Residue Tray - it is

easily removeable for

emptying and cleaning

Protective Screen -

It offers protection

against accidents.

Compatible Cartridges*

*not includes, sold separately

Solder Pot Catridge*

Handle T470*

or T245*

Spatula

Allen Key

ScrewHandle

Handle Solder Pot Cartridge

Operation

CTS Solder Pot Cartridge Stand can hold T245 or T470 handles with its Solder Pot Cartridge to

avoid it tipping over accidentally. Compatible Cartridges see previous page.

As a safety precaution, before placing the handle, make sure the station is off and the tin is cold.

1. Unlock the screw and open the holder. 2. Place the handle with its solder pot cartridge

previously inserted. Be careful to position it

correctly.

3. Once in place, lock the screw and connect

the handle to the stand.

Screw Holder

Converter

Optional: To save space at the workbench, the

handles can be connected directly to JBC’s

control units via the CHB converter without the

need for a tool stand.

- Do not melt “flux core solder wire”.

- Recommended temperatures for fine wires (up to AWG 24 aprox) and lead free solder is

300ºC. For thicker wires, increase the temperature as necessary, but keep it always at

the minimum possible.

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

To protect the stand’s rubber feets from wear and tear when fixing CTS in place put the spacers

(see packing list) between the stand and the workbench.

Use screws (we recommend M4), washers and self-locking nuts to assemble and fix the CTS in

place. Check that it is stable and level.

Fixing CTS to Workbench

Spacer

Self-locking Nut*

Screw*

Washer*

Workbench

*Screws, washers and the self-locking nuts are not included.

Washer*

Screw holes for mounting

CTS on the workbench

Top View

Front View

Maintenance

- Allow to cool the device down before carrying out maintenance or storage.

- Always unplug the handle from the station and remove it from the stand.

- Use a damp cloth to clean the tray and the protective screen. Alcohol can only be used for

cleaning the metal parts.

For easier cleaning, the protective screen can be disassembled by means of the allen key.

- Replace any defective or damaged parts. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

Tray

Protective Screen

Spatulas

Use the spatula to eliminate the dross (Oxide

and other contaminants that form on the

surface of molten solder)

Spatula

Spatula width:

17 mm / 0.67 in

Spatula width:

39 mm / 1.54 in

Allen Key Ø 2mm

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

- Do not use the appliance for any other purpose than to hold the solder pot. It is not a tool stand.

- Do not use the equipment in environments with risk of fire or explosion.

- Allow to cool down before handling.

- Before inserting the cartridge, turn off the station. If T470 is used, insert the cartridge and tighten the

screw to fix the cartridge inside the handle.

- Use on a level and stable surface.

- The stand can reach extreme hot temperatures. Protective glasses and gloves are recommended.

- Do not melt “flux core solder”.

- Do not leave the appliance unattended when it is on. Turn off when not in use or not supervised.

- Do not use next to flamable materials.

- Do not spill liquid into the solder pot.

- Utmost care must be taken with liquid tin waste which can cause severe burns.

- Keep your workplace clean and tidy.

- Be careful with the fumes produced when soldering. The use of fume extractors is recommended.

- This appliance can be used by children aged from 8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been given

supervision or instruction concerning use of the appliance in a safe way and understand the hazards

involved. Children must not play with the appliance. Cleaning and user maintenance must not be

carried out by children without supervision.

- Maintenance must not be carried out by children unless supervised.

Safety

It is imperative to follow safety guidelines to prevent electric

shock, injury, fire or explosion.

This product should not be thrown in the garbage.

In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must

be collected and returned to an authorized recycling facility.

Warranty

JBC’s 2 year warranty covers this equipment against

all manufacturing defects, including the replacement

of defective parts and labour.

Warranty does not cover product wear or misuse.

In order for the warranty to be valid, equipment must

be returned, postage paid, to the dealer where it was

purchased.

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm 130 mm

para manuales - color gris

200 mm

300 mm

0029403-121223

CTS

Solder Pot Stand

Ref. CT-SA

- Product Dimensions (aprox.): 92 x 48 mm

(L x W) 3.62 x 1.89 in

- Net Weight: 999 g / 2.20 lb

- Package Dimensions and Weight: 342 x 155 x 120 mm / 1313 g

(L x H x W) 13.46 x 6.10 x 4.72 mm / 2.89 lb

Complies with CE standards.

ESD safe.

Specifications

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Pistola de soldar de otras marcas

Bakon

Bakon 3200 Manual de usuario

Proxxon

Proxxon Gaslotset MGS Manual de usuario

HAKO

HAKO FX-8804 Manual de usuario

SATA

SATA 02002A Manual de usuario

Velleman

Velleman HRJA151 Manual de usuario

Weller

Weller WSM 1 Manual de usuario

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Instrucciones de montaje

ersa

ersa i-CON 1V Manual de usuario

Hakko Electronics

Hakko Electronics FX-100 Manual de usuario

Weller

Weller WAD 101 Manual de usuario

Weller

Weller WXD 2 Manual de usuario

AlienTek

AlienTek T100 Manual de usuario

Atten

Atten ATETOOL AT-689A Manual de usuario

Surtek

Surtek 112554 Dimensiones y guía de instalación

Parkside

Parkside PLBS 30 A1 Manual de usuario

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Manual de usuario

Weller

Weller WX1 Manual de usuario

multicomp pro

multicomp pro MP740893 Manual de usuario

jbc CTS Manual de usuario

Manuales populares de Pistola de soldar de otras marcas