Jbc JNASE-A Manual de usuario

Hot Air Station

Ref. JNASE-A

INSTRUCTION MANUAL

www.jbctools.com

Manual ................1 unit

Ref. 0024293

Hot Air Station

Ref. JNASE-A

Heater hose set .............1 unit

Ref. NH-A

Stand ................................1 unit

Ref. NA-SA

JNASE Control Unit ......1 unit

Ref. JNASE-A (85V -265V)

Packing List

The following items are included:

Kapton Tape ... 1 unit

Ref. PH217

INSTRUCTION MANUAL

Pick & Place ................... 1 unit

Ref. T260-A

Bent Needles

Set ....................... 1 unit

Ref. 0861660

Thermocouple

Type K .............................. 1 unit

Ref. PH218

Heating element..........1 unit

Ref. J115 - 010

Power cord ............ 1 unit

Ref. 0023715 (100V/120V)

0023714 (230V)

Cartridge holder .......... 1 unit

Ref. SCH-A

Pedal................................ 1 unit

Ref. P-405

www.jbctools.com

Power Socket

Fuse USB connector

Robot RS232

connector

P-405 Pedal

connector

Equipotential

connector

Auxiliar

connector

Pick and place

connection

Heater Hose set

Ref. NH-A

Stand

Ref. NA-SA

Thermocouple type K

Activates the

suction pump

USB-A

connector

Features and connection

Main switch

2,8” Color

TFT screen

Heating element

R E F. J115 - 0 10

www.jbctools.com

JNASE Work Screen

The JNASE offers an intuitive user interface which provides quick access to station parameters.

Default PIN: 0105

17:14

20ºC

Power

45% 120ºC Selected

Temp.

4m 38s

400ºC 80%

400ºC Selected

Protection

Hot Air Temp. Air Flow Selec.

Menu Options

Station

Information

Current

air

temp.

Air

temp.

selected

Instant power

supplied to

heater

Status

indicator

Selected

Air flow

Selected

External Tc

temp.

JTSE / TESE Work Screen

Status bar

The JTSE/TESE offers an intuitive user interface which provides quick access to station parameters.

Default PIN: 0105

Current

External

TC temp.

Station Tools Counters

ResetLanguage

Set the station

parameters

Set the tool

parameters

Display the hours

worked in each cycle

It is possible to

choose the language

from a list.

Allows you to carry

out an overall station

reset restoring all the

parameters to their

default values.

Station troubleshooting available on the product page at www.jbctools.com

Troubleshooting

Point

2/5

Temp

250

ºC

Flow

Time

2m 30s

3m 18s

Hot Air Temp

240

ºC ºC %

Ext. TC Temp

Air Flow

3m 18s

· Add point

· Delete point

· Load profile

· Save profile

· Exit

Current

air temp.

Data for

these points

Profile name

Current

air flow

Current

External

TC temp.

In this mode you can set up or edit as many as 25 profiles of temperature and air flow.

Edit Mode

Options

Profiles

Advanced functionalities

www.jbctools.com

450

400

350

300

250

150

100

200

Power Temp

17:14

USB ﬂash drive is connected.

Station is controlled by a PC.

Station is controlled by a robot.

System notifications

Station software update.

Press INFO to start the process.

Warning.

Press INFO for failure description.

Error.

Press INFO for failure description,

the type of error and how to proceed.

The following icons will be displayed on the screen’s status bar.

By pressing Graphics in the main MENU, temperature and power ﬁgures in real time

are displayed. This helps you decide which tip to use to obtain the best quality solder

joints.

Graphics

Temperature

Power (%) External

temp.

Ext. temp

Export graphics

Insert a USB flash drive into the USB-A

connector to save your soldering process

in csv format.

Station update

Download the JBC Update File from

www.jbctools.com/software.html

Insert the USB flash drive with the file down-

loadedto the station.

Files

Update

Choose the needle and the suction cup that best fits the component and start as follows:

Operation

1. Suction 2. Release

This tool helps you place and remove SMDs of any size easily thanks to the suction pump.

Pick & Place

Press the button to

start/stop the suction

Once the suction is

activated, cover the

pen hole with your

finger and lift off the

component.

Lift your finger to

release the component.

Pick & Place

Ref. T260-A

Bent Needles Set

Ref. 0861660

www.jbctools.com

Using the Thermocouple type K

IPC* does not recommend exceeding ramp-up rates over 3-4ºC / sec. (5-7ºF / sec) so as to reduce

the risk of thermal stress on the PCB.

* IPC was founded in the U.S. in 1957 as the Institute for Printed Circuits.

Fix the TC with Kapton Tape (Ref. PH217) as near as possible to the component being worked on.

If Kapton tape is not ESD you must use an ionizer.

Protection: the station cuts the air supply off when the External Thermocouple (TC)

temperature is reached.

Connect a TC type K (PH218) to the station and use it as a protection sensor.

You can define its use mode by means of the “Ext TC mode” option in the “Tool” menu.

Maintenance

Clean periodically

Fuse holder

Fuse

Before carrying out maintenance, always allow the equipment to cool.

- Clean the station screen with a glass cleaner or a damp cloth.

- Use a damp cloth to clean the casing and the

tool. Alcohol can only be used to clean the

metal parts.

- Periodically check that the metal parts of the

tool and stand are clean so that the station

can detect the tool status.

- Periodically check all cables and tubes.

- Replace a blown fuse as follows:

1. Pull off the fuse holder and remove the

fuse. If necessary use a tool to lever it off.

2. Insert the new fuse into the fuse holder

and return it to the station.

- Replace any defective or damaged pieces. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

www.jbctools.com

It is imperative to follow safety guidelines to prevent electric

shock, injury, fire or explosion.

产品中有害物质的名称及含量

有害物质含量表

部件名称

有害物质

铅(Pb) 汞(Hg) 镉(Cd) 六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

烙铁头 OOOOO O

手柄 OOOOO O

电源线 OOOOO O

主机 OOOOO O

电源插座 OOOOO O

保险丝 OOOOO O

主开关 OOOOO O

电位连接 X O O O O O

变压器 OOOOO O

线路板 X O O O O O

O 表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572 规定的限量要求以下。

X 表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572 规定的限量要求。

- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.

- The power cord must be plugged into approved bases. Make sure that it is properly grounded

before use. When unplugging it, hold the plug, not the wire.

- Do not work on electrically live parts.

- The tool should be placed in the stand when not in use to turn off the hot air.

The soldering tip, the metal part of the tool and the stand may still be hot even when the station

is turned off. Handle with care, including when adjusting the stand position.

- Do not leave the appliance unattended when it is on.

- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.

- Avoid the contact of flux with skin or eyes to prevent irritation

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when

working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight and also persons with reduced

physical, sensory or mental capabilities or lack of experience provided that they have been given

adequate supervision or instruction concerning use of the appliance and understand the hazards

involved. Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

Safety

Tabla de contenidos

Otros manuales de Pistola de soldar de jbc

Manuales populares de Pistola de soldar de otras marcas

Bakon

Bakon 3200 Manual de usuario

Proxxon

Proxxon Gaslotset MGS Manual de usuario

HAKO

HAKO FX-8804 Manual de usuario

SATA

SATA 02002A Manual de usuario

Velleman

Velleman HRJA151 Manual de usuario

Weller

Weller WSM 1 Manual de usuario

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Instrucciones de montaje

ersa

ersa i-CON 1V Manual de usuario

Hakko Electronics

Hakko Electronics FX-100 Manual de usuario

Weller

Weller WAD 101 Manual de usuario

Weller

Weller WXD 2 Manual de usuario

AlienTek

AlienTek T100 Manual de usuario

Atten

Atten ATETOOL AT-689A Manual de usuario

Surtek

Surtek 112554 Dimensiones y guía de instalación

Parkside

Parkside PLBS 30 A1 Manual de usuario

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Manual de usuario

Weller

Weller WX1 Manual de usuario

multicomp pro

multicomp pro MP740893 Manual de usuario

jbc JNASE-A Manual de usuario

Manuales populares de Pistola de soldar de otras marcas