Jbc T210 Series Manual de usuario

Soldering Iron Handles

Ref. T210 / T245 / T470

INSTRUCTION MANUAL

www.jbctools.com

For C245 Cartridge range

The soldering iron handles for general purposes are suitable for both SMD components and jobs

with high power requirements (e.g. ground plane soldering).

Features

Soft foam (Ref. 0016057)

Non-slip soft touch

Blue grip to easily distinguish it from other handles

General Purpose Handle

Ref. T245-A

Note: All models are supplied with a 1.5 m cable.

Blue Handle

Ref. T245-PA

Non-slip Handle

Ref. T245-B

General Purpose Handle with reinforced cable

Ref. T245-GA

Soft foam (Ref. 0016057)

Precision Purpose Handle

Ref. T210-A

For C210 Cartridge range

The T210 handles are suitable for precision soldering jobs with medium power requirements.

Due to their size, they work with conventional and small SMDs as well as under a microscope.

Blue Precision Handle

Ref. T210-PA

For C470 & C245 Cartridge ranges

For intensive soldering jobs requiring continued high thermal power. They feature good thermal

insulation with a screw to fasten the cartridge which prevents rotation.

HD Purpose Handle Heavy Duty HD Handle HD Purpose Handle + 3m cable

Ref. T470-A Ref. T470-B Ref. T470-SA

Tri-lobed HD Handle

Ref. T470-ZA

Thermal Insulator HD Handle Soft Thermal Insulator HD Handle + 3m cable

Ref. T470-FA Ref. T470-MC

Note: All models are supplied with a 1.5 m cable except those specified with 3 m.

Tri-lobed for better handling

Soft foam (Ref. 0018658)

Blue grip to easily distinguish it from other handles

Foam

www.jbctools.com

For C245 Cartridge range

Nitrogen Handle

Ref. T245-NA

For C470 Cartridge range

Nitrogen HD Handle

Ref. T470-NA

Nitrogen Handles features

Nozzles

Ref. B6193

B6194

B6195

Nozzles

Ref. B7968

B7244

These are for working in an oxygen-free atmosphere providing better quality soldering. They

offer extra heat to the solder joint and help prevent oxidation. The JBC GN-A Nitrogen Generator

Module or an external nitrogen feed is needed at the operator’s bench.

For C210 Cartridge range

Nitrogen Precision Handle

Ref. T210-NA

Nozzles

Ref. B6647

Nitrogen feed

Mark

*Important

It is essential to insert the cartridges as far as the mark for a proper connection.

Changing T210 & T245 Cartridges

1. Removing 2. Inserting 3. Fixing

Place the Cartridge in the

extractor and pull the handle

to remove it.

Place the handle on top

of the new Cartridge and

press down.

Use the holes to fix the

Cartridge* as follows:

A. For straight C210.

B. For curved C245.

C. For curved C210.

D. For cold cartridge holder

Save time and change cartridges safely without switching the station off.

www.jbctools.com

Loosen the screw. Place the Soldering Iron in

the extractor and remove the cartridge.

Changing T470 Cartridges

1. Removing 2. Inserting

Loosen

Insert the new cartridge* and press slightly

as far as the mark and tighten the screw.

Nozzle

After changing the cartridgeBefore changing the cartridge

Insert the cartridge, tighten the screw and then

place the nozzle.

Mark

First remove the nozzle. Then loosen the screw

to remove the cartridge (T245-NA / T470-NA).

Use a pliers to change or remove

nozzles when hot.

Mark

*Important

It is essential to insert the cartridges as far as the mark for a proper connection.

Changing Nitrogen Cartridges

Insert the slide-on tabs into

the new grip.

Push the grip with the tabs

onto the handle.

Hold the grip and pull them

out. Use a pliers if necessary.

tabs

new grip

Easily replace the Grips (Ref. 0016057 and Ref. 0018658) using the slide-on tabs.

Before replacing the grip, unplug the power supply and make sure the device is not hot.

1. Inserting tabs 2. Inserting handle 3. Removing tabs

Replacing grips

Maintenance

- Before carrying out maintenance, always unplug the stand and the tool.

- Check periodically that the metal parts of the tool and the stand are clean to ensure detection of

the tool when it is in the stand. Use a damp cloth or alcohol.

- Periodically check all cables and tubes connections.

- Replace any defective or damaged pieces. Use original JBC spare parts only. Repairs should only

be performed by a JBC authorized technical service.

www.jbctools.com

Fume extractor

Ref. F3435 (for T245 / T470)

Ref. F3450 (for T210)

Cable collector

Ref. CC1001

Keeps the work

area free of cable.

Clips can be easily

removed for quick

maintenance.

Accessories

The Seal is meant to prevent undesirable flux vapors or particles from entering inside the tool. Its

usage is highly recommended for intensive applications when soldering in exposed to FOD environ-

ments or for applications where the soldering iron works close to vertical position.

Replacing Seals

Before replacing the seal, unplug the power supply and make sure the device is not hot.

Note the Seal mounting posi-

tion. The chamfered side has

to be positioned towards the

Handle.

2. Mounting position 3. Inserting the Seal1. Removing the Seal

Seal

Handle

Gently push the Seal inside

the handle until it is complete-

ly into the Handle.

Handle and Seal edges have

to be aligned.

Enter a small shaft or screw-

driver in order to gently lift

and pull the Seal.

Do not insert the tool more

than 8 mm deep.

Never use a cartridge to do

this operation.

Handle Cartridge

Range CD Stand DI DDE DME HDE

T210-A C210

AD-SE

T210-PA

T245-A

C245

T245-PA

T245-B

T245-GA

T470-A C245 AD-SE

C470 HD-SE

T470-B C245 AD-SE

C470 HD-SE

T470-SA C245 AD-SE

C470 HD-SE

T470-ZA C245 AD-SE

C470 HD-SE

T470-FA C245 AD-SE

C470 HD-SE

T470-MC C245 AD-SE

C470 HD-SE

T210-NA* C210

DN-SE

T245-NA* C245

T470-NA* C245

C470

* The MNE Nitrogen Flow Regulator is required. Use the proper nozzle according to the cartridge.

Compatibility

www.jbctools.com

Notes

- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.

- The power cable must be plugged into approved bases. Make sure that it is properly grounded

before use. When unplugging it, hold the plug, not the wire.

- Do not work on electrically live parts.

- The tool should be placed in the stand when not in use in order to activate the sleep mode.

The soldering tip, the metal part of the tool and the stand may still be hot after the station

is turned off. Handle with care, including when adjusting the stand position.

- Do not leave the appliance unattended when it is on.

- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.

- Avoid flux coming into contact with skin or eyes to prevent irritation

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when

working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight as well as persons with reduced

physical, sensory or mental capabilities or lacking experience provided that they have been given

adequate supervision or instruction concerning use of the appliance and understand the hazards

involved. Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

Safety

It is imperative to follow safety guidelines to prevent electric

shock, injury, fire or explosion.

Otros manuales para T210 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Herramientas eléctricas de otras marcas

AEG

AEG OMNI-JS Manual de usuario

SIP

SIP 01533 Manual de usuario

Ribimex

Ribimex PRS499 Manual de usuario

3M Fiber Optic Connector Crimp Tool Manual de usuario

Ryobi

Ryobi P524 Manual de usuario

ROJEK

ROJEK FSN 300A Manual de usuario

Kemper

Kemper 1740PRO Manual de usuario

WABCO

WABCO OptiTire Manual de usuario

EINHELL

EINHELL TE-MS 18/210 Li Manual de usuario

Orgapack

Orgapack OR-T 85 Guía rápida

TOUGHCUT

TOUGHCUT Diamond 400 Manual de usuario

Yaros

Yaros PB-3603 Manual de usuario

Fein

Fein BSS 2.0 E Guía de configuración

Baileigh Industrial

Baileigh Industrial SS-2725 Manual de usuario

Milwaukee

Milwaukee 2674-20 Manual de usuario

Fein

Fein BLs 1.6 Manual de usuario

Princess

Princess Electric Multi Sharpener Manual de usuario

FOREDOM

FOREDOM K.1050 Manual

jbc T210 Series Manual de usuario

Manuales populares de Herramientas eléctricas de otras marcas