jbc AL251 Manual de usuario
AL251
SOLDERING IRON
www.jbctools.com
2
AL-2A / AL-1A
AL-9A / AL-2AA
SOLDER FEED
STATION
AL-SC
STAND
AL251-A
SOLDERING IRON
Power cord
socket
Equipotential
connection
0964551
Pedal
(optional)
AL251-A
SOLDERING IRON
0780493
ALLEN
AL251 / SOLDERING IRON
INSTALLATION
AL250
SOLDERING IRON
AL251
SOLDERING IRON
ww w.j bc too ls.co m
3
- Loosen the cartridge screw (1) to release the cartridge.
- Place the cartridge in the solder feed handle.
Important: It is essential to insert the cartridge till the end for a good connection. Use the mark
as reference.
- Align the tip of the cartridge with the solder guide tube (3). Tighten the cartridge screw (1).
WARNING: It is esential to tighten (1) screw for the tool to function.
- You must leave a gap of 8-10 mm between cartridge tip and the end of the guide tube (2). Loosen the
guide screw (4). Adjust the guide tube and tighten screw (4).
CHANGING THE HANDPIECE’S CARTRIDGES
AL-IA
HANDS-FREE SOLDERING ARM
AND FUME EXTRACTOR
F4468
FUME EXTRACTOR
ACCESSORIES
1
24
3
8-10 mm
Cartridge screw
Guide tube screw
Alignment
WARRANTY
JBC’s 2 years warranty guarantees this equipment against all manu-
facturing defects, covering the replacement of defective parts and
all necessary labour.
Warranty does not cover product wear due to use or mis-use.
In order for the warranty to be valid, equipment must be returned,
postage paid, to the dealer where it was purchased enclosing this
fully filled in, sheet.
www.jbctools.com
SERIAL Nº
STAMP OF DEALER
DATE OF PURCHASE
0011700-0812
This product should not be
thrown in the garbage.
All the cartridges shown are
actual size.
Consult our wide range of
cartridges with more than
250 references in
www.jbctools.com
For special cartridges
contact with our distributor.
C250 CARTRIDGE RANGE
ø 0,6
1,8x0,8
ø 0,8 4,8x1,5
1,2x0,7 3,2x1,5
ø 2,2
2,2 x 1
1,2x0,7 2,2x1
4,8x1,5
ø 2,2
ø 3,8
2,2x1
ø 1,7
ø 1
C250-401 C250-405C250-402 C250-406C250-403 C250-412
C250-404 C250-418C250-409 C250-410
C250-413C250-407 C250-408 C250-411 C250-414 C250-415
Este manual sirve para los siguientes modelos
1
Otros manuales de Herramientas eléctricas de jbc
jbc
jbc AP130 Manual de usuario
jbc
jbc PA Manual de usuario
jbc
jbc JTSE-QA Manual de usuario
jbc
jbc TESE-A Manual de usuario
jbc
jbc AM120-A Manual de usuario
jbc
jbc SF280-A Manual de usuario
jbc
jbc CS-F Series Manual de usuario
jbc
jbc B-iRON 210 Manual de usuario
jbc
jbc DR560-A Manual de usuario
jbc
jbc JTSE-1UA Manual de usuario
jbc
jbc DS360 Manual de usuario
jbc
jbc CV-E Manual de usuario
jbc
jbc DS360 Manual de usuario
jbc
jbc PHNK Manual de usuario
jbc
jbc AT420-A Manual de usuario
jbc
jbc SF250 Manual de usuario
jbc
jbc AL-A Manual de usuario
jbc
jbc NT105-A Manual de usuario
jbc
jbc ap130-a Manual de usuario
jbc
jbc AP250 Manual de usuario
