Intermec EasyCoder 601XP Manual de usuario
Installation
Instructions
Cutter Kit
(for EasyCoder PX4i,
PX6i, 501 XP, and
601 XP printers)
Intermec Technologies Corporation
Corporate Headquarters
6001 36th Ave. W.
Everett, WA 98203
U.S.A.
www.intermec.com
e information contained herein is proprietary and is provided solely
for the purpose of allowing customers to operate and service Intermec-
manufactured equipment and is not to be released, reproduced, or used
for any other purpose without written permission of Intermec.
Information and specifications contained in this document are subject to
change without prior notice and do not represent a commitment on the
part of Intermec Technologies Corporation.
© 2004 by Intermec Technologies Corporation. All rights reserved.
e word Intermec, the Intermec logo, Norand, ArciTech, CrossBar,
Data Collection Browser, dcBrowser, Duratherm, EasyCoder, EasyLAN,
Enterprise Wireless LAN, EZBuilder, Fingerprint, i-gistics, INCA (under
license), InterDriver, Intermec Printer Network Manager, IRL, JANUS,
LabelShop, Mobile Framework, MobileLAN, Nor*Ware, Pen*Key,
Precision Print, PrintSet, RoutePower, TE 2000, Trakker Antares, UAP,
Universal Access Point, and Virtual Wedge are either trademarks or regis-
tered trademarks of Intermec Technologies Corporation.
roughout this manual, trademarked names may be used. Rather than
put a trademark (™ or ®) symbol in every occurrence of a trademarked
name, we state that we are using the names only in an editorial fashion,
and to the benefit of the trademark owner, with no intention of infringe-
ment.
ere are U.S. and foreign patents pending.
Torx is a registered trademark of Camcar Division of Textron Inc.
EasyCoder PX4/6i & 501/601 XP Cutter Kit Installation Instructions iii
Contents
Contents
1 Introduction
Description.................................................................................... 2
2 Installation
Step-by-step instructions................................................................6
3 Controlling the Cutter
Fingerprint................................................................................... 10
IPL...............................................................................................10
4 Maintenance and Troubleshooting
Cleaning.......................................................................................12
iv EasyCoder PX4/6i & 501/601 XP Cutter Kit Installation Instructions
Contents
EasyCoder PX4/6i & 501/601 XP Cutter Kit Installation Instructions 1
1 Introduction
is chapter describes the cutter kits for EasyCoder
PX4i, PX6i, 501 XP, and 601 XP printers.
2 EasyCoder PX4/6i & 501/601 XP Cutter Kit Installation Instructions
Chapter 1 — Introduction
Description
e EasyCoder PX4i/PX6i and 501 XP/601 XP printers can easily
be fitted with an optional cutter, provided the printer is not already
fitted with an label-taken sensor. e cutters are almost identical with
exception for the width. Illustrations in this manual show EasyCoder
PX4i/PX6i printers, but the same principles apply to EasyCoder 501
XP/601 XP printers.
e cutter supports both Intermec Fingerprint and IPL.
e cutter unit is fitted on the same hinges as the front door, which it
replaces, and is connected by a single cable to the DIN-connector on the
printer’s front.
e cutter is available both as a factory-installed option and as a field-
installable upgrading kit. It can be installed by the operator.
e cutter is intended to cut through continuous non-adhesive paper
strip or through the backing paper between labels. It must not be used to
cut through any kind of adhesive or other soft material, that may stick to
the cutting parts and render the cutter inoperable and even damage the
electric motor by overheating.
Maximum paper thickness is 175 µm (≈175 grams/m2) for normal
paper-based materials.
Minimum practical copy length is 38.1 mm (1.5 inches)
e cutter increases the printer’s total weight and length as follows:
EasyCoder PX4i/501 XP:
Weight: 1.0 kg (2.2 lbs)
Length: 28 mm (1.1 inches)
EasyCoder PX6i/601 XP:
Weight: 1.65 kg (3.6 lbs)
Length: 28 mm (1.1 inches)
e cutter can be tilted forward in order to facilitate cleaning and paper
load.
e cutting edge will rotate to home position when the
power is turned on and when the printer is rebooted.
Always keep the cutter unit closed during operation.
EasyCoder PX4/6i & 501/601 XP Cutter Kit Installation Instructions 3
Chapter 1 — Introduction
4 EasyCoder PX4/6i & 501/601 XP Cutter Kit Installation Instructions
Chapter 1 — Introduction
EasyCoder PX4/6i & 501/601 XP Cutter Kit Installation Instructions 5
2 Installation
is chapter describes how to install the cutter on an
EasyCoder PX4i/PX6i or 501 XP/601 XP printer. No
tools are required.
Install the cutter as follows:
• Switch off the power and remove the power cord.
• Open the printer’s front door.
• Hold the printer firmly and press the front door sideways to the left so
as to disengage the hinges.
• Remove the door completely.
• Fit the cutter unit to the vacant hinges. Make sure that the lock-
ing plate snaps into the groove of the right-hand hinge and that the
angled plate at the bottom of the cutter is inserted under the printer's
bottom plate.
• Fit the cable from the cutter unit into the DIN connector on the
printer's front.
0RESS
SIDEWAYS
6 EasyCoder PX4/6i & 501/601 XP Cutter Kit Installation Instructions
Chapter 2 — Installation
Otros manuales para EasyCoder 601XP
9
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Accesorios de impresora de Intermec
Intermec
Intermec EasyCoder PD41 Manual de usuario
Intermec
Intermec EasyCoder PF8 Manual de usuario
Intermec
Intermec EasyCoder PF4ci Manual de usuario
Intermec
Intermec PW50 Manual de usuario
Intermec
Intermec EasyCoder 501XP Manual de usuario
Intermec
Intermec PC43t Manual de usuario
Intermec
Intermec EasyCoder 501 SA Manual de usuario
Intermec
Intermec ESim v4.20 Manual de usuario
Intermec
Intermec EasyCoder 201II Manual de usuario
Intermec
Intermec EasyCoder PD41 Manual de usuario
Intermec
Intermec PW50 Manual de usuario
Intermec
Intermec 074788 Series Manual de usuario
Intermec
Intermec PB42 Manual
Intermec
Intermec EasyCoder 601XP Manual de usuario
Intermec
Intermec EasyCoder 201II Manual del propietario
Intermec
Intermec 4820 Guía de inicio rápido
Intermec
Intermec EasyCoder F4 Manual de usuario
Intermec
Intermec EasyCoder F2 Manual de usuario
Intermec
Intermec PB50 Manual de usuario
Intermec
Intermec PB41 Manual de usuario
