Interlogix TruVision TVA-1101 Manual de usuario

TruVision Covert IP

Camera Installation

Manual

P/N 1072912-EN • REV C • ISS 13OCT15

Interlogix is part of UTC Building & Industrial Systems, a unit of United

Trademarks and

patents

rade names used in this document may be trademarks or registered trademarks

of the manufacturers or vendors of the respective products.

Manufacturer Interlogix

2955 Red Hill Avenue, Costa Mesa, CA 92626-5923, USA

Authorized EU manufacturing representative:

UTC Fire & Security B.V.

Kelvinstraat 7, 6003 DH Weert, The Netherlands

Certification

N4131

FCC compliance Class A: This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference

(2) This Device must accept any interference received, including interference

that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

ACMA compliance Notice! This is a Class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

Canada This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-0330 du

Canada.

European Union

directives

12004/108/EC (EMC directive): Hereby, UTC Fire & Security declares that this

device is in compliance with the essential requirements and other relevant

provisions of Directive 2004/108/EC.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be

disposed of as unsorted municipal waste in the European Union. For proper

recycling, return this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated collection points. For

more information see: www.recyclethis.info.

2006/66/EC (Battery directive): This product contains a battery that cannot be

disposed of as unsorted municipal waste in the European Union. See the product

documentation for specific battery information. The battery is marked with this

symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the battery to your supplier or to a

designated collection point. For more information see: www.recyclethis.info.

Contact information

For contact information, see www.interlogix.com or

www.utcfssecurityproducts.eu.

Installation Manual 3

Content

Product overview 4

Installation 4

Installation environment 4

Package contents 5

Cable requirements 5

Camera description 6

Set up camera unit 9

Prepare covert holes with adhesive tape 11

Install lens 12

Complete the installation 18

Configuration 19

Access the SD card 19

Use the camera with an Interlogix NVR and TruVision Navigator 19

Specifications 19

TruVision covert IP cameras 19

Pin definitions 20

4 Installation Manual

Product overview

This is the installation manual for the following TruVision Covert IP camera models:

TVA-1101 (1.3MPX IP ATM/covert camera, WDR, PAL)

TVA-3101 (1.3MPX IP ATM/covert camera, WDR, NTSC)

TVL-0101 (TruVision Covert Lens, 1.3MPx, Pinhole, 3.7mm@ F2.3, 2m cable)

TVL-0102 (TruVision Covert Lens, 1.3MPx, L-shape, 3.7mm@ F2.3, 2m cable)

TVL-0103 (TruVision Covert Lens, 1.3MPx, Cylinder, 4mm@ F2.0, 2m cable)

TVL-0104 (TruVision Covert Lens, 1.3MPx, Pinhole, 3.7mm@ F2.3, 8m cable)

TVL-0105 (TruVision Covert Lens, 1.3MPx, L-shape, 3.7mm@ F2.3, 8m cable)

TVL-0106 (TruVision Covert Lens, 1.3MPx, Cylinder, 4mm@ F2.0, 8m cable)

TVL-0107 (TruVision Covert Lens, 1.3MPx, L-shape, 2mm@ F2.0, 2m cable)

TVL-0108(TruVision Covert Lens, 1.3MPx, Cylinder, 2mm@ F2.0, 2m cable)

TVL-0109 (TruVision Covert Lens, 1.3MPx, L-shape, 2mm@ F2.0, 8m cable)

TVL-0110 (TruVision Covert Lens, 1.3MPx, Cylinder, 2mm@ F2.0, 8m cable)

Installation

This chapter provides information on how to install the cameras.

Installation environment

When installing your product, consider these factors:

•Electrical: Install electrical wiring carefully. It should be done by qualified service

personnel. Always use a proper PoE switch or a 12 VDC UL listed Class 2 or CE

certified power supply to power the camera. Do not overload the power cord or

adapter.

•Ventilation: Ensure that the location planned for the installation of the camera is

well ventilated.

•Temperature: Do not operate the camera beyond the specified temperature,

humidity or power source ratings. The operating temperature of the camera is

between -30 to +60°C (-22 to 140°F). Humidity is below 90%.

•Moisture: Do not expose the camera to rain or moisture, or try to operate it in wet

areas. Turn the power off immediately if the camera is wet and ask a qualified

service person for servicing. Moisture can damage the camera and also create the

danger of electric shock.

Installation Manual 5

•Servicing: Do not attempt to service this camera yourself. Any attempt to

dismantle or remove the covers from this product will invalidate the warranty and

may also result in serious injury. Refer all servicing to qualified service personnel.

•Cleaning: Do not touch the sensor modules with fingers. If cleaning is necessary,

use a clean cloth with some ethanol and wipe the camera gently. If the camera will

not be used for an extended period of time, put on the lens cap to protect the

sensors from dirt.

Package contents

Check the package and contents for visible damage. If any components are damaged

or missing, do not attempt to use the unit; contact the supplier immediately. If the unit

is returned, it must be shipped back in its original packaging.

Package contents:

•Camera or lens

•Mounting accessories

•Installation manual

•CD with Configuration Manual and TruVision Device Manager

Note:

The ATM/covert camera has no lens in the product package. The lens needs to be

purchased separately according to the application needs. Please notice that there are

different cable length and form factor options.

CAUTION: Use direct plug-in UL listed power supplies marked Class 2/CE certified or

LPS (limited power source) of the required output rating as listed on the unit.

CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of

used batteries according to the instructions.

Cable requirements

For proper operation, adhere to the following cable and power requirements for the

cameras. Category 5 cabling or better is recommended. All network cabling must be

installed according to applicable codes and regulations.

Recommended power cable requirements to connect the camera:

12 VDC power jack or PoE (802.3-af)

6Installation Manual

Camera description

Figure 1: Covert IP camera description

Covert camera unit:

1. Main unit

2. Mounting rack

3. Mounting plate

4. Power indicator

5. Status indicator

6. Link indicator

7. Audio In/Out

8. RJ-12 port

9. Micro SD card slot

10. Reset button

11. 12V DC Power port

12. PoE and network port

13. RS-232 and alarm port

ALARM

RS232

RXD TXD GND IN1 1B 1A

LAN(PoE)

DC 12V

RESET

VIN1

AUDIO

OUT

AUDIO

456

789

11 12

Installation Manual 7

Accessories

Mounting plate

12 VDC connector: DC jack

socket to terminal connectors

with positive and negative indicators.

Mounting rack

Drywall anchor, Ø7.5 x 24.5 mm (3

pcs)

Screw A, Ø4 x 25 mm (3 pcs)

Screw B, Ø2 x 6mm (4 pcs)

Table 1: LED Indicators

LED Color and Status Indication

POWER Solid red Normal operation

Unlit Power Off

STATUS Solid green Camera works properly

Unlit Camera does not work properly.

LINK Flashing amber Network connection is functioning

properly

Unlit No network connection

8Installation Manual

Figure 2: Covert IP camera Lens and bracket description

Lens and brackets: (purchased separately)

1. L-shape lens

2. L-shape lens cover

3. L-shape lens mounting bracket

4. Pinhole lens

5. Pinhole lens mounting bracket

6. Cylinder lens

7. Cylinder lens mounting

bracket

8. L-shape 2mm lens

9. L-shape 2mm lens surface

mount cover

Accessories

L-shape lens:

Cover

Mounting bracket

Adhesive tape (2 pcs, 1 mm and 4 mm)

Screw A Ø4 x 25 mm (3 pcs)

Drywall anchor Ø7.5 x 24.5 mm (3

pcs)

Pinhole lens:

Mounting bracket

Drywall anchor Ø7.5 x 24.5 mm (3

pcs)

Screw A Ø4 x 25 mm (3 pcs)

Installation Manual 9

Cylinder lens:

Mounting bracket

Drywall anchor Ø7.5 x 24.5 mm (3

pcs)

Screw A Ø4 x 25 mm (3 pcs)

L-shape lens (2 mm):

Cover

Adhesive tape

Drywall anchor Ø7.5 x 24.5 mm (3 pcs)

Screw A Ø4 x 25mm (3 pcs)

Set up camera unit

Note: If the light source where the camera is installed experiences rapid, wide-

variations in lighting, the camera may not operate as intended.

Install a camera block:

1. Prepare the mounting surface. The surface should be smooth and clean.

2. Fix the mounting rack on the mounting surface using the enclosed screws A.

10 Installation Manual

3. Fix the mounting bracket on the rear panel of the camera block with the four

enclosed screws B.

4. Hook the top catch of the camera mounting bracket on the prepared rack. Then

gently press the lower part of the camera block against the rack so that it snaps

into position on the rack.

Note:If there is a standard rail installed, you can directly snap the camera block with

mounting bracket on the prepared rail.

Otros manuales para TruVision TVA-1101

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de seguridad de Interlogix

Interlogix

Interlogix TVD-5110-3 Manual de usuario

Interlogix

Interlogix TruVision 4 IP Series Hoja de instrucciones

Interlogix

Interlogix TruVision TVB-2402 Instrucciones de funcionamiento y mantenimiento

Interlogix

Interlogix True Vision TVP-5104 Manual de usuario

Interlogix

Interlogix TruVision Line Manual de usuario

Interlogix

Interlogix TruVision TVT-2101 Manual de usuario

Interlogix

Interlogix TruVision TVD-6120VE-2 Manual de usuario

Interlogix

Interlogix TVD-5125TE-3 Manual de usuario

Interlogix

Interlogix UltraView UVD-6130VE-2-P Manual de usuario

Interlogix

Interlogix TruVision TVD-7120VE-2 Manual de usuario

Interlogix

Interlogix TruVision Line Manual

Interlogix

Interlogix UltraView Manual de usuario

Interlogix

Interlogix PIR Manual de usuario

Interlogix

Interlogix Ultra View UVD-6120VE-2 Manual de usuario

Interlogix

Interlogix FW5.1 Manual de usuario

Interlogix

Interlogix TruVision TVP-5101 Hoja de instrucciones

Interlogix

Interlogix TruVision Line Manual de usuario

Interlogix

Interlogix TruVision TVD-5801 Manual de usuario

Interlogix

Interlogix TruVision Line Manual de usuario

Interlogix

Interlogix UVD-XP4DNR(-P) Manual de usuario

Interlogix

Interlogix TruVision TVB-2402 Manual de usuario

Interlogix

Interlogix TruVision TVD-N210V-2-N(-P) Manual de usuario

Interlogix

Interlogix UltraSync RS-3240 Manual de usuario

Interlogix

Interlogix TruVision TVB-2101 Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario