Interlogix TruVision Open Standards Manual de usuario

TruVision IP Dome

Open-Standards Quick

Start Guide

P/N 1076512A-EN • REV 1.0 • ISS 07OCT11

Trademarks and

patents

Interlogix, TruVision brand and logo are

trademarks of UTC Fire & Security.

Other trade names used in this document may

be trademarks or registered trademarks of the

manufacturers or vendors of the respective

products.

Manufacturer UTC Fire & Security Americas Corporation, Inc.

2955 Red Hill Avenue, Costa Mesa, CA

92626-5923, USA

Authorized EU manufacturing representative:

UTC Fire & Security B.V.

Kelvinstraat 7, 6003 DH Weert, The Netherlands

FCC compliance This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference that

may cause undesired operation.

Certification N4131

European Union

directives

12004/108/EC (EMC directive): Hereby, UTC Fire

& Security declares that this device is in

compliance with the essential requirements and

other relevant provisions of Directive

2004/108/EC.

2002/96/EC (WEEE directive): Products marked

with this symbol cannot be disposed of as

unsorted municipal waste in the European Union.

For proper recycling, return this product to your

local supplier upon the purchase of equivalent

new equipment, or dispose of it at designated

collection points. For more information see:

www.recyclethis.info.

Contact

information

See www.interlogix.com or

www.utcfssecurityproducts.eu.

Quick Start Guide 1 EN

Content

Graphics 2

Introduction 6

Package contents 6

Installation environment 6

Camera dimensions 6

Setting up the camera 7

Connecting the devices 7

Accessing the camera over the internet 8

Overview of the camera Web browser 9

Network and streaming configuration 10

Specifications 11

EN 2 Quick Start Guide

Graphics





Quick Start Guide 3 EN



EN 4 Quick Start Guide



Quick Start Guide 5 EN





EN 6 Quick Start Guide

Introduction

This pocket guide provides basic information on installing the TruVision

IP dome and wedge dome open-standard cameras.

For detailed information on installing and using the cameras, please

refer to the user manual.

Package contents

The camera is shipped with the following items:

Camera

Hex wrench

Mounting plate (excluding wedge dome cameras)

Video cable for testing (excluding wedge dome cameras)

Multilingual quick start guide

CD with user manual in several languages

Installation environment

Refer to the user manual for detailed information, but observe these

important requirements:

• Place the camera in a secure location.

• Ensure that the camera is in a well-ventilated area.

• Do not expose the camera to rain or moisture.

Camera dimensions

See Figure (Dome and IR dome cameras) and Figure (Wedge

dome cameras).

Quick Start Guide 7 EN

Setting up the camera

Note: If the light source where the camera is installed experiences

rapid, wide variations in lighting, the camera may not operate as

intended.

For detailed instructions, please refer to the user manual.

To quickly put the camera into operation:

1. Prepare the mounting surface.

2. Connect the required cables to the camera.

3. Mount the camera to the ceiling using the appropriate fasteners.

4. Set up the camera’s network and streaming parameters so that the

camera can be controlled over the network.

5. Program the camera to suit its location.

Connecting the devices

Dome cameras:

See Figure (Connections on the base of the dome and IR dome

cameras).

1. Ground. Connect to ground.

2. Ethernet RJ45 PoE port. Connect to network devices.

3. Audio output. Connect to an audio output. Line level, 600 Ω.

4. Initial set. Press to hard reboot camera.

5. Audio input. Connect to an audio input. 2.0 to 2.4 Vp-p, 1 kΩ.

6. RS-485 D+, D-. Connect to an RS-485 device such as a PTZ dome

camera.

7. Alarm outputs. Connect 1A/1B and 2A/2B to alarm output devices.

8. Alarm inputs. Connect IN1/GND and IN2/GND to alarm input

devices.

9. Power supply. Connect +12 VDC power supply.

EN 8 Quick Start Guide

Wedge dome cameras:

See Figure (Wedge dome camera connections).

1. Power input connector. Connect +12 VDC power supply. Optional.

2. Ethernet RJ45 PoE connector. Connect to the network devices.

3. Lens.

4. Power LED.

5. Lens positioning screws.

6. Network status LEDs.

7. Reset switch. Click to reset all parameters to factory default.

Accessing the SDHC card

Insert an SDHC card up to 32GB for local storage in the dome

cameras (see Figure , item ). The card is not supplied with the

camera.

Video and log files stored on the SDHC card can only be accessed via

the Web browser. You cannot access the card using TruVision

Navigator or a recording device.

Note: There is no SDHC card slot in the wedge dome cameras.

Accessing the camera over the internet

Use the camera Web browser to access and configure the camera

over the internet. Only one camera is accessible from a single Web

browser window.

To access the camera online:

1. In the Web browser enter the camera’s IP address (default is

192.168.1.70). The Login dialog box appears.

Note: Ensure that the Active X controls are enabled.

2. Enter your user name and password.

User name: admin

Password: 1234

Otros manuales para TruVision Open Standards

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de seguridad de Interlogix

Interlogix

Interlogix TruVision TVC-6110-1 Instrucciones de funcionamiento y mantenimiento

Interlogix

Interlogix PIR Manual de usuario

Interlogix

Interlogix UltraView UVD-6130VE-2 Series Manual de usuario

Interlogix

Interlogix TruVision Line Manual de usuario

Interlogix

Interlogix UltraView Manual de usuario

Interlogix

Interlogix UltraView PTZ Manual de usuario

Interlogix

Interlogix TVB-5301 Manual de usuario

Interlogix

Interlogix TruVision 5 Series Hoja de instrucciones

Interlogix

Interlogix TruVision TVD-2404 Manual de usuario

Interlogix

Interlogix TruVision TVD-7120VE-2 Manual de usuario

Interlogix

Interlogix TruVision TVB-4402 Manual de usuario

Interlogix

Interlogix TruVision TVB 2102 Manual de usuario

Interlogix

Interlogix TruVision TVT-2103 Manual de usuario

Interlogix

Interlogix TVW-6101 Manual de usuario

Interlogix

Interlogix TruVision TVD-2401 Manual de usuario

Interlogix

Interlogix TruVision 4 IP Series Hoja de instrucciones

Interlogix

Interlogix TruVision IP Dome Manual de usuario

Interlogix

Interlogix TruVision TVD-5801 Manual de usuario

Interlogix

Interlogix TruVision TVB-2402 Manual de usuario

Interlogix

Interlogix UltraView UVC-6130-1-N Manual de usuario

Interlogix

Interlogix TruVision TVD-7120VE-2 Manual de usuario

Interlogix

Interlogix TruVision HD-TVI 3MPX Hoja de instrucciones

Interlogix

Interlogix 4 SERIES Hoja de instrucciones

Interlogix

Interlogix TruVision Series Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario