IFM Electronic Efector100 GG507S Manual de usuario

Operating instructions

(Ex protection related part) for inductive sensors

according to EU directive 94/9/EC Annex VIII (ATEX)

group II, equipment category 3D

IG514A

706343 / 00 02 / 2013

Remarks for safe use in hazardous areas

Functions and features

• Use in hazardous areas according to the classification

II 3D

(group II, category 3D, apparatus for dust atmosphere).

The requirements of the standards EN 60079-0 and EN 60079-31 are met.

• Marking (see unit or technical data sheet)

II 3D Ex tc IIIC T80°C Dc X IP67

• Permissible operating temperature of the application (proper usage):

Ta: -20°C...+60°C

Installation / Set-up

The units must only be installed, connected and set up by qualified staff. The qualified staff

must have knowledge of protection classes, regulations and provisions for apparatus in

hazardous areas.

Check whether the classification (see "Marking" above and marking on the unit) is suitable

for the application.

Installation remarks / Installation

• Adhere to the respective national regulations and provisions as well as the relevant

installation regulations.

• Avoid electrostatic charging on plastic units and cables.

• To avoid electrostatic charging clean the unit with a damp cloth only. Rubbing with non-

conductive materials must be strictly avoided.

• To avoid electrostatic charging steps must be taken to ensure the equalisation of potential

of metal parts (plug housing, fixing elements, protective housing, etc.).

• Do not mount the unit in the dust flow.

• Avoid dust deposits on the units.

• Protect the units and the cables efficiently against damage.

• For the connections and the electrical characteristics please see the unit marking or the

technical data sheet.

• Avoid direct radiation with high UV components (sunlight). Mount the unit in a protected

place.

• M12 plugs may only be opened or closed in a sufficiently clean environment.

• The secure fit of the impact protection housing for the sensor must be checked depending

on the installation conditions (temperature, vibration,...) and at intervals to be defined by

the operator.

Special conditions for safe operation

• The housing and housing parts made of plastic were tested with the supplied impact pro-

tection housing in accordance with EN 60079-0 for group II and for a low mechanical risk

with an impact energy of 4 joules.

• Use sockets which are suited for hazardous areas, e.g. ifm sockets EVC**A with Ex certifi-

cate (certificate number BVS 08 ATEX E 109 U).

• Protect the sockets by tightening the hexagon coupling nut sufficiently according to the

requirements of the Ex protection related operating instructions of the socket.

• Do not disconnect the connector while live.

• Apply a durable warning in suitable form close to the connector reading: „Do not separate

when energized“ or use the enclosed label if you can ensure a durable marking.

• The units must only be operated with the supplied impact protection housing for the

sensor.

►Screw the impact protection housing onto the sensor manually until the end stop.

►Screw the lock nut against the impact protection housing.

►Turn the nut against the impact protection housing until the latter also starts to turn. Use

an appropriate spanner.

Maintenance / Repair

The unit must not be modified nor can it be repaired. In case of a fault please contact the

manufacturer.

If required, the technical data sheets and EC declarations of conformity can be obtained

from the manufacturer. Indicate the article number.

Otros manuales para efector100 GG507S

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de IFM Electronic

IFM Electronic

IFM Electronic efector 300 SU8000 Manual de usuario

IFM Electronic

IFM Electronic Efector 200 OL Series Manual de usuario

IFM Electronic

IFM Electronic Ecomat 100 CR2102 Guía de aplicación

IFM Electronic

IFM Electronic O1D106 Manual de usuario

IFM Electronic

IFM Electronic efector150 Manual de usuario

IFM Electronic

IFM Electronic Efector 300 Manual de usuario

IFM Electronic

IFM Electronic efector500 PQ08 Series Manual de usuario

IFM Electronic

IFM Electronic efector300 SI1004 Manual de usuario

IFM Electronic

IFM Electronic efector180 IX5010 Manual de usuario

IFM Electronic

IFM Electronic Efectorsod PM2053 Manual de usuario

IFM Electronic

IFM Electronic Efector 410 JN2100 Guía de aplicación

IFM Electronic

IFM Electronic efector 200 OIH5 Series Manual de usuario

IFM Electronic

IFM Electronic efector100 ID503A Manual de usuario

IFM Electronic

IFM Electronic efector 200 OT Manual de usuario

IFM Electronic

IFM Electronic OGP Manual de usuario

IFM Electronic

IFM Electronic Efector 500 PL2058 Manual de usuario

IFM Electronic

IFM Electronic Efector 200 OL Series Manual de usuario

IFM Electronic

IFM Electronic LR7300 Manual de usuario

IFM Electronic

IFM Electronic TS502A Manual de usuario

IFM Electronic

IFM Electronic KQ5 Series Manual de usuario

IFM Electronic

IFM Electronic efector 200 OPU200 Manual de usuario

IFM Electronic

IFM Electronic LR8009 Manual de usuario

IFM Electronic

IFM Electronic SB 4 Series Manual de usuario

IFM Electronic

IFM Electronic PA32xx Series Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Manual de usuario

IFM Electronic efector100 GG507S Manual de usuario

Manuales populares de Accesorios de otras marcas