IFM Electronic Efector 200 Manual de usuario

Operating instructions

Diffuse reflection sensor with

background suppression

O6H2

O6H200 / 01 01 / 2015

1 Preliminary note

1.1 Symbols used

►Instruction

> Reaction, result

[…] Designation of pushbuttons, buttons or indications

→Cross-reference

Important note

Non-compliance can result in malfunctions or interference.

2 Functions and features

The diffuse reflection sensor detects objects and materials without contact and

indicates their presence by a switching signal.

3 Installation

►Align the diffuse reflection sensor to the object to be detected.

►Secure it to a bracket.

Note:

The objects to be detected are to move transversely to the

lens of the sensor.

►In case of other directions of movement it should be

tested before whether safe switching is guaranteed.

4 Operating and display elements

1: LED yellow - switching output active

2: Setting potentiometer „range“

3: LED green - operation, stability indication

4: Selector „output function“

4.1 Stability indication

The green LED is lit when the supply voltage is applied and the sensor signal is

stable.

stable signal switch point stable signal

Light-on mode

LED green on off off on

LED yellow on on off off

Dark-on mode

LED green on off off on

LED yellow off off on on

5 Electrical connection

The unit must be connected by a qualified electrician.

►The national and international regulations for the installation of electri-

cal equipment must be adhered to.

►Ensure voltage supply to EN 50178.

►Disconnect power.

►Connect the unit as follows:

5.1 PNP

Connector M12 pigtail Cable *





















Connector M8 3-pin Connector M8 4-pin





















* Core colours: BN = brown, BU = blue, BK = black

5.2 NPN

Connector M12 pigtail Cable *

L+

Connector M8 3-pin Connector M8 4-pin

L+

* Core colours: BN = brown, BU = blue, BK = black

6 Settings

6.1 Set the output function

►Setting D: dark-on mode

►Setting L: light-on mode

6.2 Set the range

►Increase range: turn the setting screw

of the potentiometer clockwise.

►Decrease range: turn the setting screw

of the potentiometer anti-clockwise.

Objects that are beyond the set switch point are suppressed.

7 Operation

►Check whether the unit operates correctly.

> The green LED is lit when the supply voltage is applied and the sensor signal

is stable.

> Dark-on mode: the output is switched / the yellow LED is lit when no object is

detected.

> Light-on mode: the output is switched / the yellow LED is lit when an object is

detected.

8 Maintenance, repair, disposal

►Keep the lens of the sensor free from soiling.

►For cleaning do not use any solvents or cleaning agents which could damage

the plastic parts.

►After use dispose of the unit in an environmentally friendly way in accordance

with the applicable national regulations.

Faulty sensors must only be repaired by the manufacturer.

Technical data and further information at unter www.ifm.com

Otros manuales para Efector 200

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de IFM Electronic

IFM Electronic

IFM Electronic TUV NORD Efector 110 GM701S Manual de usuario

IFM Electronic

IFM Electronic efector 410 JN2300 Guía de aplicación

IFM Electronic

IFM Electronic efectro 200 Manual de usuario

IFM Electronic

IFM Electronic efector200 OT Series Manual de usuario

IFM Electronic

IFM Electronic Efector 500 PP70 Series Manual de usuario

IFM Electronic

IFM Electronic Efector 300 SA1000 Manual de usuario

IFM Electronic

IFM Electronic LK8122 Manual de usuario

IFM Electronic

IFM Electronic Efector230 Manual de usuario

IFM Electronic

IFM Electronic efector 200 OJ50 Series Manual de usuario

IFM Electronic

IFM Electronic efector 200 O5D15 Series Manual de usuario

IFM Electronic

IFM Electronic VSA003 Manual de usuario

IFM Electronic

IFM Electronic efector200 O7H2 Series Manual de usuario

IFM Electronic

IFM Electronic VKV021 Manual de usuario

IFM Electronic

IFM Electronic efector100 GG507S Manual de usuario

IFM Electronic

IFM Electronic PB7 Manual de usuario

IFM Electronic

IFM Electronic efector300 SU9004 Manual de usuario

IFM Electronic

IFM Electronic SM7000 Manual de usuario

IFM Electronic

IFM Electronic TS502A Manual de usuario

IFM Electronic

IFM Electronic PN7000 Manual de usuario

IFM Electronic

IFM Electronic Ecomat 100 CR2102 Guía de aplicación

IFM Electronic

IFM Electronic efector160 LI51 Manual de usuario

IFM Electronic

IFM Electronic efector500 PQ08 Series Manual de usuario

IFM Electronic

IFM Electronic Efector 200 Guía de instalación

IFM Electronic

IFM Electronic O1D105 Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Manual de usuario