IFM Electronic Efector230 Manual de usuario

Operating instructions

Ultrasonic diffuse reflective sensors

UGB

UGC

80237715 / 00 04 / 2016

1 Preliminary note

1.1 Symbols used

►Instructions

> Reaction, result

→Cross-reference

Important note

Non-compliance may result in malfunction or interference.

Information Supplementary note.

2 Safety instructions

• Installation, electrical connection, set-up, operation and maintenance of the unit

must be carried out by qualified personnel authorised by the machine operator.

3 Functions and features

Ultrasonic sensors detect objects of various materials without any contact.

Depending on the selected sensor, detected objects are signalled via switching

output or their distance is indicated by means of a proportional analogue signal.

4 Installation

UGBxxx / UGCxxx

1: Status LED (yellow) 2: Echo LED (green)

►Position object.

►Align the ultrasonic sensor so that it directly faces the object or the background

and secure it to a bracket.

> Object / background is detected when the echo LED (green) lights.

Sound-absorbing surfaces have a negative effect on a reliable function.

During installation of the device, consider the blind zone.

5 Electrical connection

►Disconnect power.

►Connect device (depending on the type selected)

Core colours

2 1

L+

OUT

2WH

Teach

L+

OUT

2WH

Teach

Units with binary output

BK Black OUT: Switching output

BN Brown Teach: Programming wire

BU Blue Units with analogue output

OUT: Analogue output

WH White Teach: Programming wire

Colours to DIN EN 60947-5-2

Technical data and further information at → www.ifm.com

6 Set-up

Note the LED behaviour for the set-up:

Echo LED green

On Echo is received.

Off No echo (object / background not detected).

Off For the time of resetting to factory setting.

Status LED yellow

LED Function acknowledgement

Flashes 1 Hz x Programming mode active.

Flashes 2.5 Hz x Setting distance P1 completed.

Flashes 4 Hz x Setting distance P2 completed or

assignment acknowledgement of the setting.

Flashes 10 Hz x Inverting the switching characteristics.

7 Wire programming

Unit with switching output: Teach with L+. Unit with analogue output: Teach with L-.

L+

OUT

2WH

L+

OUT

2WH

8 Settings

►Start programming mode of the device.

►Connect teach input, 2 s...6 s → 7 Wire programming.

> LED flashes (1 Hz).

If programming has not been completed successfully, the device returns to

the previous setting.

8.1

Window function, distance P1 > P2

►Object in position P1.

►Connect teach input approx. 1 s.

> LED flashes (2.5 Hz).

►Object in position P2.

►Connect teach input approx. 1 s.

> LED flashes (4 Hz).

B P2 P1

Output response:

Units with switching outputs.

Output response:

Units with analogue output.

B P2 P1

X: Distance B: Blind zone

Y: Output response P1: Setting point 1 (OUTx)

①: OUT1 (switching output) P2: Setting point 2 (OUTx)

②: OUT2 (analogue output)

8.2 Hysteresis function, distance P1 = P2

►Object in position P1.

►Connect teach input approx. 1 s.

> LED flashes (2.5 Hz).

►Object in position P2.

►Connect teach input approx. 1 s.

> LED flashes (4 Hz).

B P1/P2

Output response:

Units with switching outputs.

Output response:

Units with analogue output

B P1/P2

8.3 Inverting the output response

►Connect teach input > 6 s → 7 Wire programming.

> LED flashes (> 10 Hz).

Inverted output function (switching output: NO changes to NC or vice versa /

Analouge output: low...high signal changes to wird high... low signal or vice versa

8.4 Restore factory setting

►Align the device so that no echo is received.

►Go into the programming mode of the unit.

►Connect teach input 1 s → 7 Wire programming.

> LED flashes shortly with 4 Hz.

9 Operation

►Check whether the unit operates correctly.

> Display by LEDs:

Green LED is lit. Echo is received.

Yellow LED is lit Output is switched / object is into the teached operating range .

Green LED flashes Short circuit at the output.

The minimum distance between the “Proximity Switch Metal Enclosure“ and

any “External uninsulated live part“ shall be at least 12.7 mm.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de IFM Electronic

IFM Electronic

IFM Electronic efector 190 DTE820 Manual de usuario

IFM Electronic

IFM Electronic O1D108 Manual de usuario

IFM Electronic

IFM Electronic Efector 200 OL Series Manual de usuario

IFM Electronic

IFM Electronic PN72 Series Manual de usuario

IFM Electronic

IFM Electronic efector 300 SU9001 Manual de usuario

IFM Electronic

IFM Electronic efector 200 OPU200 Manual de usuario

IFM Electronic

IFM Electronic efector 300 SU8200 Manual de usuario

IFM Electronic

IFM Electronic LR8300 Manual de usuario

IFM Electronic

IFM Electronic Efector 300 Manual de usuario

IFM Electronic

IFM Electronic efector 200 OW Series Manual de usuario

IFM Electronic

IFM Electronic O5E5 A Series Manual de usuario

IFM Electronic

IFM Electronic KQ5 Series Manual de usuario

IFM Electronic

IFM Electronic efector160 LI214 Series Manual de usuario

IFM Electronic

IFM Electronic Efector 200 Manual de usuario

IFM Electronic

IFM Electronic Efector 200 Manual de usuario

IFM Electronic

IFM Electronic Efector 200 Manual de usuario

IFM Electronic

IFM Electronic Efectorsod PM2053 Manual de usuario

IFM Electronic

IFM Electronic efector200 OW Series Manual de usuario

IFM Electronic

IFM Electronic efector 300 SM7001 Manual de usuario

IFM Electronic

IFM Electronic efector 200 OG laser Manual de usuario

IFM Electronic

IFM Electronic LR8009 Manual de usuario

IFM Electronic

IFM Electronic efector 250 O2D2 Series Manual del propietario

IFM Electronic

IFM Electronic efector 200 OT Manual de usuario

IFM Electronic

IFM Electronic O5D10 series Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Manual de usuario

IFM Electronic efector230 Manual de usuario

Manuales populares de Accesorios de otras marcas