ICP DAS USA TM-AD5 Manual de usuario

tM-AD5 Quick Start Guide

Quick Start Guide

for tM-AD5

Mar 2012, Version 1.1.0

Congratulations on purchasing the tM-AD5 the most popular automation solution for

remote monitoring and control applications. This Quick Start Guide will provide

information needed to get started with the tM-AD5. Please also consult the User Manual

for detailed information on the setup and use of the tM-AD5.

In addition to this guide, the shipping box includes the following items:

tM-AD5

ICP DAS Website

http://www.icpdas.com/

tM-AD5 Quick Start Guide

----------------------------------------------------------------------------------

Understanding the Hardware Specifications

and Wiring Diagrams

Before installing the hardware, you should have a basic understanding of hardware

specification and the wiring diagrams.

System Specifications：

tM-AD5 Quick Start Guide

I/O Specifications：

tM-AD5 Quick Start Guide

Wire Connection：

Pin Assignment：

tM-AD5 Quick Start Guide

Make sure the switch placed in the

“Init” position.

---------------------------------

-------------------------------------------------

Connecting to the PC and the Power Supply

The tM-Series series is equipped with an RS-485 port

for connection to a 232/USB converter to PC

--------------------------------------------

Booting the tM-Series in

Init Mode

Connect to the PC

using an RS-485 Converter

Connect to PC

using a USB Converter

7520

Power Supply

232

485

Series

Power Suppl

USB

485

7561

Series

tM-AD5 Quick Start Guide

---------------

------------------------------------------------------------------

Installing the DCON Utility

The DCON Utility is an easy-to-use tool designed to enable simple configuration of I/O

modules that use the DCON protocol.

Step 1: Locate the DCON Utility

The DCON Utility can be obtained from the companion CD or from the

ICPDAS FTP site:

CD:\Napdos\8000\NAPDOS\Driver\DCON_Utility\setup\

http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/

Step 2: Follow the prompts to complete the installation

After the installation has

been completed, there will be a new

shortcut to the DCON Utility on the

desktop.

-----------------------------------------------------------

-----------------------

Using the DCON Utility to Initialize the

tM-Series Module

The tM-Series is an I/O module based on the DCON protocol, meaning that you can use

the DCON Utility to easily initialize it.

tM-AD5 Quick Start Guide

Step 1: Run the DCON Utility

Double-click the DCON Utility

shortcut on your desktop.

Step 2: Use the COM1 port to communicate with the

tM-Series

Click the “COM Port” option from the menu and a dialog box will be displayed that will

allow you to set the communication parameters as described in the table below.

Communication

parameter Factory

default Value

Address 00

Baud Rate 9600

Protocol DCON

Checksum Disabled

Parity N,8,1

tM-AD5 Quick Start Guide

Step 3: Search for the

tM-Series

module

Click “Start Search” button from the toolbox to search for the tM-Series module.

After the tM-Series module is displayed in the list, click “Stop Search” button.

Step 4: Connect to the tM-Series

After clicking on the name of the module in the list, a dialog box will be displayed.

Start Search

Stop Search

tM-AD5 Quick Start Guide

Step 5: Initialize the tM-Series module

Set the “Address” field in the dialog box to 1 and then click “Setting” button to save the

settings.

Make sure the INIT switch is placed in the

“Normal” position.

----------------------------------------------------------------------------------

Starting the Module Operation

After rebooting the tM-Series module, search for the module to make sure the settings

have been changed. You can double click on the name of the module in the list to open

the configuration dialog box.

--------------------------------------------

Rebooting the tM-Series

Module in Normal Mode

tM-AD5 Quick Start Guide

---------------------------------------------------------------------------------

Modbus Address Mapping

Address Description Attribute

30001 ~ 30005

40001 ~ 40005 Analog input value of channel 0 to 4 R

40481 Firmware version (low word) R

40482 Firmware version (high word) R

40483 Module name (low word) , 0x5001 R

40484 Module name (high word) , 0x0700 R

40485 Module address, valid range: 1 ~ 247 R/W

40486 Bits 5:0

Baud rate, 0x03 ~ 0x0A

Code 0x03 0x04 0x05 0x06

Baud 1200 2400 4800 9600

Code 0x07 0x08 0x09 0x0A

Baud 19200 38400 57600 115200

Bits 7:6

00: no parity, 1 stop bit

01: no parity, 2 stop bits

10: even parity, 1 stop bit

11: odd parity, 1 stop bit

R/W

40487 Type code R/W

40488 Modbus response delay time in ms, valid range:

0 ~ 30 R/W

40489 Host watchdog timeout value, 0 ~ 255, in 0.1s R/W

40490 Channel enable/disable, 00h ~ 1Fh R/W

40492 Host watchdog timeout count, write 0 to clear R/W

00257 Protocol, 0: DCON, 1: Modbus RTU R/W

00258 Protocol, 0: determined by 00257, 1: Modbus

ASCII R/W

00261 1: enable, 0: disable host watchdog R/W

00269 Modbus data format, 0: hex, 1: engineering R/W

00270 Host watch dog timeout status, write 1 to clear

host watch dog timeout status R/W

00271 1: enable, 0: disable fast mode R/W

Tabla de contenidos

Otros manuales de Unidad de control de ICP DAS USA

ICP DAS USA

ICP DAS USA DS-2200 Series Manual de usuario

ICP DAS USA

ICP DAS USA PM-4324 Series Manual de usuario

ICP DAS USA

ICP DAS USA EIP-2060 Manual de usuario

ICP DAS USA

ICP DAS USA ZT-2510 Series Manual de usuario

ICP DAS USA

ICP DAS USA tSG-3781B Manual de usuario

ICP DAS USA

ICP DAS USA ECAT-2061 Manual de usuario

ICP DAS USA

ICP DAS USA ECAT-2051 Manual de usuario

ICP DAS USA

ICP DAS USA ET-7083 Manual de usuario

ICP DAS USA

ICP DAS USA I-7188XA Manual de usuario

ICP DAS USA

ICP DAS USA ET-7H16M Series Manual de usuario

ICP DAS USA

ICP DAS USA CAN-8123 Manual de usuario

ICP DAS USA

ICP DAS USA I-7014D Manual de usuario

ICP DAS USA

ICP DAS USA PET-7053 Manual de usuario

ICP DAS USA

ICP DAS USA MDC-700 Series Manual de usuario

ICP DAS USA

ICP DAS USA GT-540P-3GWA-OEM1 Manual de usuario

ICP DAS USA

ICP DAS USA I-8014W Manual de usuario

ICP DAS USA

ICP DAS USA I-8092F Manual de lista de piezas

ICP DAS USA

ICP DAS USA PDS-220F Series Manual de usuario

ICP DAS USA

ICP DAS USA WF-2026 Manual de usuario

ICP DAS USA

ICP DAS USA M-7002 Manual de usuario

ICP DAS USA

ICP DAS USA M-7024 Manual de usuario

ICP DAS USA

ICP DAS USA 7188EN Guía de instalación

ICP DAS USA

ICP DAS USA I-2533 Manual de usuario

ICP DAS USA

ICP DAS USA tGW-700 Series Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario

ICP DAS USA tM-AD5 Manual de usuario

Manuales populares de Unidad de control de otras marcas