HunterDouglas SCG 64 Manual de usuario

REV 08 October`10

max 1000 mm

Install the roller blind. Level the side guiding chan-



channel against the bottom of the end cap. Mark the

drilling positions.

Type SCG 64

Fix the side guiding channel (with provided screws)

on the marked position.

Press the cover caps onto the drill holes.

Installation with screw Installation Instruction

Roller Blind

Side Channel Guiding

Installation in recess

         



side guiding channels.

-

side of the bracket. Fix the channel in this position

(with provided screws).

Divide the width between both outer drill holes into

equal sections (in accordance with possibilities).

Pay attention that the maximum distance of 1000

mm between two drill holes will not be exceeded.

Distance between drill holes

X = max.

1000 mm

click

REV 08 October`10

100 mm

Ø 5,5 mm

Ø 10 mm

100 mm

Ø5,5 mm Ø10 mm

!  

end cap. Mark the horizontal position of the screw

with X = 75 mm to the bottom of the end cap.

Fix the clip with provided screw. Snap the other

clips sidewise onto the side guiding channel.

Place the side guiding channel sidewise into the up-

per clip. Level the side guiding channel. Slide a clip

to the lower position. Level the bottom of the clip and

side guiding channel. Mark the hole.

Place the distance plate behind the bracket. Pay at-

tention that the printing should be the same as on

the bracket (L or R). Align the distance plate to the



Divide and mark the other clips with an equal dis-

tance (max 1000 mm). Remove the channel from

the clip. Fix the clips. Place the bottom rail into the

side guiding channel.

Place the side guiding channel above the clips.

Snap the channel into the clips. Fix the left side



Series 5-30, 5-40, 5-100 & 5-120 Arrangement of drill holes

Drill a hole (Ø 5,5 mm) in the groove of the side guid-

"

       #$$  % 

inner hole up to Ø 10 mm.

Drill a hole (Ø 5,5 mm) in the groove of the side

"

#$$&

side the hole diameter has to be 10 mm.

Loose the screw and remove the bottom end cap

'

Wall installation with cap

Side installation in recess

Installation with clip

Otros manuales de Persiana de ventana de HunterDouglas

HunterDouglas

HunterDouglas Silhouette A Deux Manual de lista de piezas

HunterDouglas

HunterDouglas PowerView Venetian Blind 18VDC Manual de usuario

HunterDouglas

HunterDouglas Sonnette Manual de lista de piezas

HunterDouglas

HunterDouglas Vignette Modern Roman Shades Manual de lista de piezas

HunterDouglas

HunterDouglas Alustra Woven Textures Manual de usuario

HunterDouglas

HunterDouglas Luxaflex PowerView Manual de usuario

HunterDouglas

HunterDouglas VS 100 Guide rail Guía de mantenimiento y servicio

HunterDouglas

HunterDouglas LiteRise Manual de usuario

HunterDouglas

HunterDouglas Specialty Motorized Vertical Blinds Manual de lista de piezas

HunterDouglas

HunterDouglas Standard Hardware System Manual de lista de piezas

HunterDouglas

HunterDouglas ZIP 100 Guía de mantenimiento y servicio

HunterDouglas

HunterDouglas WOODMATES Manual de usuario

HunterDouglas

HunterDouglas EverWood Guía del usuario

HunterDouglas

HunterDouglas Silhouette Duolite UltraGlide Manual de usuario

HunterDouglas

HunterDouglas Solera Soft Shades Manual de usuario

HunterDouglas

HunterDouglas Reveal with MagnaView Manual de operación

HunterDouglas

HunterDouglas LiteRise Manual de operación

HunterDouglas

HunterDouglas 5-257 Manual de usuario

HunterDouglas

HunterDouglas Luminette PowerView Instrucciones de montaje

HunterDouglas

HunterDouglas Silhouette Halo Duolite Manual de lista de piezas

HunterDouglas

HunterDouglas Sonnette Manual de usuario

HunterDouglas

HunterDouglas RB 500 Guía de seguridad

HunterDouglas

HunterDouglas Alustra Woven Textures ST30 Manual de lista de piezas

HunterDouglas

HunterDouglas Remembrance Motorized Shade Especificaciones técnicas

Manuales populares de Persiana de ventana de otras marcas

Jysk

Jysk ROGEN Manual de usuario

SOMFY

SOMFY 1241752 Manual de usuario

Rollos

Rollos S-Nanorollo V2 Guía de planificación

Teptron

Teptron Move Manual de usuario

Renson

Renson Outdoor Loggia Guía de seguridad

Project Source

Project Source CDLF2342W Manual de usuario

Domondo

Domondo PureNight Manual de instrucciones de instalación

rollease acmeda

rollease acmeda Easy Spring Air Guía de configuración

IKEA

IKEA KADRILJ Manual de usuario

Hallis Hudson

Hallis Hudson Rolls Super glide Manual de usuario

Benthin

Benthin P1614 Manual de usuario

MV LINE

MV LINE CLARA 015 Manual de instrucciones

Current

Current E-WAND Guía

weinor

weinor VertiTex ZipR Manual

Roto

Roto ZAR M R4/R7 Manual de usuario

SOMFY

SOMFY Movelite WT Series Manual de usuario

Acmeda

Acmeda RF400 Series Manual de usuario

Motura

Motura Pli_353/3 Manual de usuario