HunterDouglas Silhouette Duolite UltraGlide Manual de usuario

PowerView®Gen 3

Automation

SoftTouch®

UltraGlide

Silhouette

Duolite

Window Shadings

UltraGlide, SoftTouch, and PowerView Gen 3

Automation Operating Systems

Installation

•

Operation

•

Care

CONTENTS

Questions?

Call Hunter Douglas Consumer Support at (800) 789-0331.

their respective owners.

GETTING STARTED..............................................................................................1

Product Views.......................................................................................................... 1

Tools and Fasteners Needed ................................................................................... 2

INSTALLATION .....................................................................................................3

Installation Overview............................................................................................... 3

STEP 1: Mount the Installation Brackets................................................................ 3

Importance of Limit Stops on Silhouette Window Shadings.................................. 3

Mount the Installation Brackets — Inside Mount.................................................. 4

Mount the Installation Brackets — Outside Mount ............................................... 7

Additional Clearance with Spacer Blocks ............................................................... 8

STEP 2: PowerView®Gen 3 and SoftTouch®Only: Install the Battery Wand ........ 9

STEP 3: Install the Shading...................................................................................11

STEP 4: PowerView®Gen 3 and SoftTouch®Only: Connect the Power Source ... 12

SoftTouch®Only — Unpack the Wand and Attach to Activation Arm ................. 17

Final Adjustment.................................................................................................... 17

PowerView®Gen 3 Only – Testing the Shading.................................................... 19

OPERATION.........................................................................................................20

Operate the Shading.............................................................................................. 20

UltraGlide®Shadings............................................................................................. 21

SoftTouch®Motorization........................................................................................ 22

Operating the PowerView®App and Gen 3 Remote ............................................. 24

Resetting the Shading (If Necessary).................................................................... 25

TROUBLESHOOTING .........................................................................................26

CARE.....................................................................................................................37

Removing the Shading........................................................................................... 37

Cleaning Procedures.............................................................................................. 37

CHILD SAFETY....................................................................................................39

POWERVIEW DECLARATIONS ........................................................................40

WARRANTY ........................................................................................................41

GETTING STARTED

Product Views

Optional Dust Cover

(For Outside Mount)

Optional Back Cover

(For Inside Mount)

Installation Brackets

Limit Stops

Wand

UltraGlide®

Headrail

Roller Shade

Bottom Rail

Rear

Roller Shade

Front Shading

Shading

Bottom Rail

Control

Butto

Battery Wand

PowerView® Gen 3

Automation

Battery Wand

SoftTouch®

Motorization

Activation Arm

Wand

GETTING STARTED

Thank you for purchasing Hunter Douglas Silhouette®Window Shadings. With proper

installation, operation, and care, your new shadings will provide years of beauty

andperformance.

Please thoroughly review this instruction booklet before beginning the installation. If your

shading has a protective plastic cover on the fabric-covered headrail, keep the plastic in place

until the shading is installed.

IMPORTANT: An orange shipping clip is installed in the headrail for the UltraGlide®shading.

Please do not remove the clip until instructed to do so.

Tools and Fasteners Needed

■

⁄

" hex and flat blade screwdrivers ■ Level (laser level is recommended)

■ Measuring tape and pencil ■ Pliers

■ Power drill,

⁄

" drill bit,

and

⁄

" hex driver

■ Scissors (heavy-duty)

In addition, you will need fasteners designed to work with your specific mounting surface(s).

■ #6 Hex Head Screws (Provided). Two 1

⁄

" screws are provided per installation bracket.

■ Longer #6 Hex Head Screws (Not Provided). If using spacer blocks, use #6 screws

long enough for a secure attachment.

■ Speed Nuts and Screws (Provided). Extension brackets come with screws and speed nuts.

■ Rechargeable Battery Wand Spacer Block Kit (Provided with Rechargeable Battery

Wand Option). Two spacer blocks and two #8 2½" screws are in the kit.

■ Outside Mount Battery Wand Spacer Block Kit. Available separately in ½" and ¼".

■ Drywall Anchors (Not Provided). Use drywall anchors when mounting into drywall.

Speed Nut

and Screw

(Provided with Each

Extension Bracket)

#6 x 1½"

Hex Head Screw

(Provided)

Longer #6 Hex Head Screw

for Use with Spacer Blocks

(Not Provided)

Outside Mount

Battery Wand

Spacer Block Kit

(Available in both

½" and ¼")

Rechargeable Battery Wand

Spacer Block Kit

(Provided with Rechargeable

Battery Wand)

∕

INSTALLATION

Installation Overview

To install your shading, you will need to perform the following four steps:

STEP 1: Mount the Installation Brackets

STEP 2: PowerView®Gen 3 and SoftTouch®Only: Mount the Battery Wand, If Applicable

STEP 3: Install the Shading

STEP 4: PowerView Gen 3 and SoftTouch Only: Connect the Power Source, If Applicable

STEP 1: Mount the Installation Brackets

■ The number of installation brackets required

varies with shading width, as shown in the table. Width Brackets Required

14" – 48" 2

⁄

" – 84" 3

Installation

Bracket

Importance of Limit Stops on Silhouette Window Shadings

Limit stops serve as the upper travel limit for the bottom rail, preventing it from rotating

around the fabric roll. Limit stops are located 6" from the ends of the headrail or are

centered on shadings less than 36" wide.

When a shading is made, the limit stops are adjusted according to the size of the fabric

roll. Occasionally, this adjustment changes during shipping or installation. If this happens,

problems can be fixed by readjusting the limit stops. See page 32 in the Troubleshooting

section if shading operation is difficult or if the bottom rail rotates around the fabric roll.

Shown below are the four possible positions of limit stops for large to small fabric rolls.

Large Fabric Rol

mall Fabric Roll

INSTALLATION

Mounting Types and Window Terminology

If the installation brackets are mounted correctly, the rest of the installation process follows

easily. To prepare for this important first step, review the mounting types and basic window

terminology illustrated below.

■ Refer to the appropriate page below based on your order:

➤ Inside Mount — Below

➤ Outside Mount — Page 7

Mount the Installation Brackets — Inside Mount

Prepare the Installation Brackets

NOTE: Back cover is not available with rechargeable

battery wand.

■ If using the optional back cover:

NOTE: If you have a battery wand, do not remove

the top tab on the back cover bracket. The top tab

ensures that there is clearance for the battery

wand.

➤ If you have a satellite battery pack or an 18V

DC Power Supply, remove the top tab on the

back cover bracket.

➤ Snap the back cover bracket into the metal

installation bracket.

■ If not using the optional back cover:

➤ If you have a battery wand, remove the bottom

tab from the back cover bracket.

➤ Snap the back cover bracket into the metal

installation bracket. This ensures adequate

space for the battery wand.

➤ If you have a satellite battery pack or an 18V

DC Power Supply, it is not necessary to use the

back cover bracket.

Outside Mount

Shading mounts

outside window

opening.

Inside Mount

Shading ﬁts within

window opening.

Collectively, the sill and

jambs are called the

“window casement.”

Molding

Head Jamb

Sill

Jamb Jamb

Remove top tab if using a satellite

battery pack or an 18V DC Power Supply.

Back Cover Bracket

Remove bottom tab if using a

battery wand and no back cover.

Top Tab

Bottom Tab

Back Cover

Slots

INSTALLATION

Mount the Installation Brackets

■ Mark 2" from each jamb for bracket location.

➤ If more than two installation brackets came with your order, space additional bracket(s)

between the two end brackets and mark their location. Mount into wood whenever

possible.

➤ For PowerView®Gen 3 or SoftTouch®shadings with battery wand, allow a minimum of

18” between bracket centerlines for the battery wand/rechargeable battery wand.

NOTE: Before the headrail is installed, the bracket levers need to be fully to the left.

Once the headrail is properly in place, the levers automatically click to the right.

■ The depth required for mounting will vary depending on the power supply and mounting

type.

■ Center the installation brackets on your

marks and mark the location of the

screw holes.

➤ Allow sufficient rear clearance

when positioning the brackets.

NOTE: Rear clearance is the

distance between the back of the installation bracket and the glass or frame

➤ Add an extra

⁄

" of rear clearance if the optional back cover is used.

IMPORTANT: The back cover is not available with the rechargeable battery wand.

Motor

Side

Space Evenly

Jamb Jamb

Space Evenly

18" Minimum for Battery Wand/

Rechargeable Battery Wand

Operating System Type

Minimum Mounting Depth Fully Recessed Depth

Without

Back Cover

With

Back Cover

Without

Back Cover

With

Back Cover

UltraGlide®1"1

⁄

PowerView®Gen 3 and

SoftTouch®with Battery Wand 2" 2

⁄

" 4

⁄

16"

PowerView Gen 3 and SoftTouch

with Rechargeable Battery Wand 2

⁄

" — 4

⁄

"—

Rear

Clearance

Nearest

Obstruction

Jamb

Operating System and Power Supply Rear Clearance

UltraGlide ¼"

PowerView Gen 3 or SoftTouch with satellite battery ¼"

PowerView Gen 3 or SoftTouch with battery wand ¾"

PowerView Gen 3 or SoftTouch with rechargeable battery wand 1"

INSTALLATION

■ Use a level to check that the mounting surface is level. Shim (not provided) the brackets, if

necessary.

■ Use a

⁄

" drill bit to drill holes for the mounting screws.

CAUTION: Use drywall anchors when mounting into drywall.

■ Attach the installation brackets using the screws provided.

NOTE: Do not overtighten the screws. Check to ensure

the lever can be moved easily side to side. If the lever is

not moving easily, loosen the screws in one-eighth turn

increments until it can be moved easily.

IMPORTANT: The front edges of the installation brackets

must be level and aligned to each other.

UltraGlide®Shading: Proceed to “STEP 3: Install the Shading” on page 11.

PowerView®Gen 3 and SoftTouch®Shadings: Proceed to

“STEP 2: PowerView®Gen 3 and SoftTouch®Only: Install the Battery

Wand” on page 9.

Lever

INSTALLATION

Mount the Installation Brackets — Outside Mount

■ Center the headrail over the window opening at the desired height. Use a pencil to lightly

mark each end of the headrail.

➤ Alternatively, measure the width of the headrail and use that width to mark the

headrail end points over the window opening.

■ Mark 2" from each of the headrail end marks for bracket location.

➤ If more than two installation brackets came with your order, space additional bracket(s)

between the two end brackets and mark their location. Mount into wood whenever

possible.

➤ For PowerView®Gen 3 Automation and SoftTouch®Motorization shadings with battery

wand, allow a minimum of 18" between bracket centerlines for the battery wand/

rechargeable battery wand.

■ Center the installation brackets on your marks and mark the location of the screw holes.

➤ A minimum 1" flat vertical height is required to mount the installation brackets.

➤ Position the top of the installation brackets at the desired

height of the shading. The brackets must be level and aligned.

CAUTION: The rear of the blocks/brackets must be flush

against a flat mounting surface. Do not mount brackets on curved

molding.

IMPORTANT: Additional clearance is required for PowerView

Gen 3 and SoftTouch shadings with a headrail-mounted battery wand

or rechargeable battery wand. See “Additional Clearance with Spacer

Blocks” on page 8.

■ Use a

⁄

" drill bit to drill holes for the mounting screws.

CAUTION: Use drywall anchors when mounting into drywall.

■ If no additional clearance is required, attach the installation

brackets directly to the mounting surface using the screws

provided.

IMPORTANT: The front edges of the installation brackets

must be level and aligned to each other.

WARNING: Failure to properly align the brackets

could result in the headrail releasing from the

brackets.

Window Opening

2" 2"

Headrail End Mark Headrail End Mark

INSTALLATION

Additional Clearance with Spacer Blocks

NOTE: A minimum of

⁄

" additional clearance is required for PowerView®Gen 3 and

SoftTouch®shadings with a battery wand. A minimum of 1"additional clearance is required

for PowerView Gen 3 and SoftTouch shadings with a rechargeable battery wand.

■ If using

⁄

" or

⁄

" spacer blocks, attach the spacer block(s) and installation bracket to a flat

vertical mounting surface with #6 screws for inside mount or #8 2½" screws for

rechargeable battery wand outside mount to ensure a secure installation.

IMPORTANT: The solid side of the spacer blocks must face toward the mounting surface.

Additional Clearance with Extension Brackets

■ If using extension brackets, attach each extension

bracket to the mounting surface using the screws

provided.

■ Attach an installation bracket to the underside of each

extension bracket using the provided screws and

speed nuts.

NOTE: The maximum amount of added clearance using

extension brackets is 3".

UltraGlide®Shading: Proceed to “STEP 3: Install the Shading” on page 11.

PowerView Gen 3 and SoftTouch Shadings: Proceed to

“STEP 2: PowerView®Gen 3 and SoftTouch®Only: Install the Battery

Wand” on page 9.

Spacer

Blocks

Longer

Screws

⁄

" Maximum

Added Clearance

∕

Battery Wand

∕

Rechargeable

Battery Wand

Screw

Extension

Bracket

Speed Nut

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Persiana de ventana de HunterDouglas

HunterDouglas

HunterDouglas 5-257 Manual de usuario

HunterDouglas

HunterDouglas EverWood Guía del usuario

HunterDouglas

HunterDouglas Duette Honeycomb Shades Manual de usuario

HunterDouglas

HunterDouglas ZIP 100 Guía de mantenimiento y servicio

HunterDouglas

HunterDouglas Paramount Headrail Systems Manual de lista de piezas

HunterDouglas

HunterDouglas VS 100 Guide rail Guía de mantenimiento y servicio

HunterDouglas

HunterDouglas LiteRise Manual de lista de piezas

HunterDouglas

HunterDouglas RB 500 Guía de seguridad

HunterDouglas

HunterDouglas Alustra Woven Textures Manual de usuario

HunterDouglas

HunterDouglas DecoFlex WireFree Telis Instrucciones de funcionamiento

HunterDouglas

HunterDouglas Horizontal Aluminum Blinds Manual de operación

HunterDouglas

HunterDouglas Vignette Modern Roman Shades Manual de lista de piezas

HunterDouglas

HunterDouglas Specialty Motorized Vertical Blinds Manual de lista de piezas

HunterDouglas

HunterDouglas Solera Soft Shades Manual de usuario

HunterDouglas

HunterDouglas RB 500 Manual de usuario

HunterDouglas

HunterDouglas Brilliance Manual de operación

HunterDouglas

HunterDouglas Design Studio Manual de instalación

HunterDouglas

HunterDouglas Reveal with MagnaView Manual de operación

HunterDouglas

HunterDouglas LiteRise Manual de operación

HunterDouglas

HunterDouglas Vignette Traditional Manual de usuario

HunterDouglas

HunterDouglas Duette SkyLift Manual de usuario

HunterDouglas

HunterDouglas PowerView EOS Plisse Manual de usuario

HunterDouglas

HunterDouglas Country Woods Manual de operación

HunterDouglas

HunterDouglas Remembrance Motorized Shade Especificaciones técnicas

Manuales populares de Persiana de ventana de otras marcas

Jysk

Jysk ROGEN Manual de usuario

SOMFY

SOMFY 1241752 Manual de usuario

Rollos

Rollos S-Nanorollo V2 Guía de planificación

Teptron

Teptron Move Manual de usuario

Renson

Renson Outdoor Loggia Guía de seguridad

Project Source

Project Source CDLF2342W Manual de usuario

Domondo

Domondo PureNight Manual de instrucciones de instalación

rollease acmeda

rollease acmeda Easy Spring Air Guía de configuración

IKEA

IKEA KADRILJ Manual de usuario

Hallis Hudson

Hallis Hudson Rolls Super glide Manual de usuario

Benthin

Benthin P1614 Manual de usuario

MV LINE

MV LINE CLARA 015 Manual de instrucciones

Current

Current E-WAND Guía

weinor

weinor VertiTex ZipR Manual

Roto

Roto ZAR M R4/R7 Manual de usuario

SOMFY

SOMFY Movelite WT Series Manual de usuario

Acmeda

Acmeda RF400 Series Manual de usuario

Motura

Motura Pli_353/3 Manual de usuario