HunterDouglas Palmetto Horizontal Shadings Manual

Installation & Operating Instructions

Horizontal Shadings

Beaded Chain Loop

Cordless Lift

TABLE OF CONTENTS

Getting Started:

Mounting Types...............................................................................................................3

Installation Components ..................................................................................................3

Tools and Fasteners Needed ............................................................................................4

Product View...................................................................................................................5

Installation:

Inside or Outside Mount —

Mount the Installation Brackets ........................................................................................6

Attach the Universal Cord Tensioner .................................................................................7

Attach the Magnetic Hold Down Brackets .........................................................................8

Operation:

Operate the Shade ..........................................................................................................9

Remove the Shade..........................................................................................................9

Troubleshooting

Troubleshooting ............................................................................................................ 10-11

Care..................................................................................................................................12

Child Safety:

Cord Loop Shades.........................................................................................................13

GETTING STARTED

Thank you for purchasing Horizontal Shadings. With proper installation, operation, and care,

your new shades will provide years of beauty and performance. Please thoroughly review this

instruction booklet before beginning the installation.

MountingTypes

If the installation brackets are mounted correctly, the rest of the installation process will follow

easily. To prepare for this important ﬁrst step, review the mounting types and basic window

terminology illustrated below.

Installation Components

Check the packaging to be sure you have all the components needed to install your shade.

Keep the packaging until the shades perform to your satisfaction.

Required Components

Installation Brackets for Horizontal Shadings. The number of installation brackets required

varies depending on the shade width, as shown in the table.

Outside Mount

Shade mounts outside

window opening.

Inside Mount

Shade ﬁts within

window opening.

Collectively, the sills and

jambs are called the

“window casement.”

Molding

Top Sill

Bottom Sill

Jamb Jamb

Horizontal Shadings

Shade

Width Brackets

Required

Up to 36” 2

36 1/8” - 72” 3

72 1/8” - 90” 4

90 1/8” - 120" 5

Getting Started

4 Getting Started

Universal CordTensioner (UCT) Installation Kit (Beaded

Chain only). The UCT functions as a safety device that makes

the cords less accessible to children and pets. The cord

control will only function properly if the UCT is installed

correctly.

Hold-Down Brackets (optional). Hold-down brackets provide stability

and prevent swaying by securing the bottom bar (i.e. often used in

French door applications).

Tools Needed

Flat blade and Phillips screwdriver Level

Measuring tape and pencil Power drill

tions

Magnetic

Hold-Down

5Product View

ProductView

Horizontal Shadings

Fabrics

Cassette

Installation (Mounting) Brackets

End Caps

Tensioner Device

(Part #RC124785)

Tensioner Device

Mounting Brackets

(Part #KIT2352)

Cassette

Bracket

Bead Chain Connector

Bead Chain Stopper

Clutch

Bead Chain Loop

Tube

End Plug

Bottom Slat – All Fabrics

Bottomrail

Bottomrail End Caps

Magnetic Hold-Down

(Part #KIT9108)

Balance Weight

Weight Clips

Tassel and Cord

(Cordless Control Only)

6 Installation

INSTALLATION

Inside or Outside Mount — Mount the Installation Brackets

Measure and mark 2½" in from each jamb for bracket location.

If more than two installation brackets came with your order, space additional bracket(s) on

studs, evenly between the two end brackets and mark their location.

Mark the location of the screw holes by the brackets

on the previously made marks.

IMPORTANT: The brackets must be level and aligned to each other.

Use a 3/32" drill bit to drill holes for the screws.

IMPORTANT: If you are fastening the installation brackets to drywall, be sure to use wall

anchors and follow the instructions provided with the anchors. (Anchors not provided.)

Use a level to check that the mounting surface is level. Shim the brackets if necessary.

(Shims not provided.)

Peel back the protective covering from the top and endcaps of the headrail. Leave the rest

of the protective covering on the front of the headrail.

Install brackets by sliding the headrail into the groove inside the front lip of the bracket and

then push towards back of the brackets until snaps into place.

Completely remove the protective covering from the headrail.

7Installation

Attach the Universal CordTensioner (Beaded Chain only)

Before operating the blind, you must attach the UCT (Universal Cord Tensioner) to the wall or the

window frame. Slide the cord tensioner to the bottom of the cord loop.

Insert a small screwdriver, punch, or awl through the screw hole at the bottom of the cord

tensioner.

Move the screw hole down to the indicator line to release the safety mechanism.

Slide the cord tensioner down to the bottom of the cord loop.

Install the window covering and use the instruction provided to secure the cord tensioner

to the window casement.

For complete UCT installation, see the instructions provided

WARNING: It is imperative that the cord tensioner be properly

secured to the wall or window frame to reduce children’s

access to the cord loop. Young children can strangle in cord

loops. They can also wrap cords around their necks and

strangle.

CAUTION: The shading will not operate properly unless the cord

tensioner is secured. A cord tensioner installation kit has been

included with your shading. Follow the instructions in the kit to

correctly secure the cord tensioner.

8 Installation

Attach the Magnetic Hold-Down Brackets (Optional)

Lower the shading, keeping the vanes closed.

Place the magnetic hold-down bracket onto the bottom rail just inside

the end cap, oriented as shown.

Hold the bracket while opening and closing the vanes. (It may be

necessary to have someone assist you.) Adjust the bracket to the best

overall position.

Mark the screw location using the mounting options shown below.

The screw should be placed in the middle of the channel. This will

allow for adjustment.

Drill the screw holes using a

" drill bit.

IMPORTANT: Use drywall anchors when mounting into drywall.

Attach the hold-down brackets to the mounting surface using

the screws provided.

If necessary, adjust bracket height by loosening the screw and

sliding the bracket up or down.

Hold-Down

Bracket

Bottom

Rail

Outside Mount

Preferred Alternate

Inside Mount

Preferred Alternate

Adjust bracket

height by

loosening the

screw and sliding

the bracket up or

down.

INSTALLATION

9Operation/Troubleshooting

OPERATION

Attach the Magnetic Hold-Down Brackets (Optional)

Lower the shading, keeping the vanes closed.

Place the magnetic hold-down bracket onto the bottom rail just inside

the end cap, oriented as shown.

Hold the bracket while opening and closing the vanes. (It may be

necessary to have someone assist you.) Adjust the bracket to the best

overall position.

Mark the screw location using the mounting options shown below.

The screw should be placed in the middle of the channel. This will

allow for adjustment.

Drill the screw holes using a

" drill bit.

IMPORTANT: Use drywall anchors when mounting into drywall.

Attach the hold-down brackets to the mounting surface using

the screws provided.

If necessary, adjust bracket height by loosening the screw and

sliding the bracket up or down.

Hold-Down

Bracket

Bottom

Rail

Outside Mount

Preferred Alternate

Inside Mount

Preferred Alternate

Adjust bracket

height by

loosening the

screw and sliding

the bracket up or

down.

Operate the Shade

Beaded Chain Operation

To LowerThe Shade

Hold the back of the beaded chain loop and pull down.

Pull until the shade is at the desired height.

To RaiseThe Shade

Hold the front of the beaded chain loop and pull down.

Pull until the shade is at the desired height.

Cordless Operation

To LowerThe Shade

Pull down on the tassel until the shade is at the desired height

To RaiseThe Shade

Gently pull down on the tassel. To raise the shade completely, simply release the tassel and the

shade will roll up fully into the headrail. To raise the shade partially, when the shade is at the

desire height, gently pull on the tassel to stop the shade from raising.

Remove the Shade

Push the front of the horizontal shading and then bring forward.

10 Operation / Troubleshooting

Problem The shading raises or lowers unevenly, the fabric rubs against one end of

Solution Check that the window is square by measuring the diagonals.

Check that the installation brackets are level. Shim to level, if necessary.

Adjust the bottom rail weight. See below.

Adjusting the Bottom Rail Weight

Release the weight clips by inserting

a ﬂat blade screwdriver into the

weight clip and turning clockwise.

Move the weight in 1" increments toward the side where the fabric is

gathering.

Secure the weight clips in position by turning them counterclockwise after

making the adjustment.

Test and, if necessary, adjust again.

Weight

Bottom Rail

Weight

Clip

Weight

Clip

Fabric Roll

Gathered

Fabric

Move Weight

TROUBLESHOOTING

Tabla de contenidos

Otros manuales de Persiana de ventana de HunterDouglas

HunterDouglas

HunterDouglas Cadence Manual de lista de piezas

HunterDouglas

HunterDouglas Vignette Traditional Manual de usuario

HunterDouglas

HunterDouglas Pirouette PowerView+ Gen 3 Automation Manual de lista de piezas

HunterDouglas

HunterDouglas LiteRise Manual de operación

HunterDouglas

HunterDouglas Silhouette Halo Duolite Manual de lista de piezas

HunterDouglas

HunterDouglas ZIP 100 Guía de mantenimiento y servicio

HunterDouglas

HunterDouglas Country Woods Manual de operación

HunterDouglas

HunterDouglas PowerView Manual de lista de piezas

HunterDouglas

HunterDouglas Specialty Motorized Vertical Blinds Manual de lista de piezas

HunterDouglas

HunterDouglas VS 100 Guide rail Guía de mantenimiento y servicio

HunterDouglas

HunterDouglas 2" Horizontal Aluminum Blinds Manual de lista de piezas

HunterDouglas

HunterDouglas Sonnette Manual de lista de piezas

HunterDouglas

HunterDouglas Duette SkyLift Manual de usuario

HunterDouglas

HunterDouglas 5-151 Manual de usuario

HunterDouglas

HunterDouglas Vignette Tiered Manual de usuario

HunterDouglas

HunterDouglas Standard Cordlock, Moveable Slat Specialty... Guía del usuario

HunterDouglas

HunterDouglas Provenance Woven Wood Shades Manual de lista de piezas

HunterDouglas

HunterDouglas Nantucket EasyRise Manual de operación

HunterDouglas

HunterDouglas Luxaflex PowerView Manual de usuario

HunterDouglas

HunterDouglas Silhouette A Deux Manual de lista de piezas

HunterDouglas

HunterDouglas Solera Soft Shades Manual de usuario

HunterDouglas

HunterDouglas LiteRise Manual de usuario

HunterDouglas

HunterDouglas LiteRise Manual de lista de piezas

HunterDouglas

HunterDouglas 5-156 Manual de usuario

Manuales populares de Persiana de ventana de otras marcas

Jysk

Jysk ROGEN Manual de usuario

SOMFY

SOMFY 1241752 Manual de usuario

Rollos

Rollos S-Nanorollo V2 Guía de planificación

Teptron

Teptron Move Manual de usuario

Renson

Renson Outdoor Loggia Guía de seguridad

Project Source

Project Source CDLF2342W Manual de usuario

Domondo

Domondo PureNight Manual de instrucciones de instalación

rollease acmeda

rollease acmeda Easy Spring Air Guía de configuración

IKEA

IKEA KADRILJ Manual de usuario

Hallis Hudson

Hallis Hudson Rolls Super glide Manual de usuario

Benthin

Benthin P1614 Manual de usuario

MV LINE

MV LINE CLARA 015 Manual de instrucciones

Current

Current E-WAND Guía

weinor

weinor VertiTex ZipR Manual

Roto

Roto ZAR M R4/R7 Manual de usuario

SOMFY

SOMFY Movelite WT Series Manual de usuario

Acmeda

Acmeda RF400 Series Manual de usuario

Motura

Motura Pli_353/3 Manual de usuario