Huawei ME906A Instrucciones de montaje

No part of this document may be reproduced or transmitted in any form or by any means

without prior written consent of Huawei Technologies Co., Ltd.

The product described in this manual may include copyrighted software of Huawei

Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce,

distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign,

or sublicense the said software, unless such restrictions are prohibited by applicable laws or

such actions are approved by respective copyright holders under licenses.

Trademarks and Permissions

, , and are trademarks or registered trademarks of Huawei

Technologies Co., Ltd.

Other trademarks, product, service and company names mentioned are the property of their

respective owners.

Notice

Some features of the product and its accessories described herein rely on the software

installed, capacities and settings of local network, and may not be activated or may be

limited by local network operators or network service providers, thus the descriptions herein

may not exactly match the product or its accessories you purchase.

Huawei Technologies Co., Ltd reserves the right to change or modify any information or

specifications contained in this manual without prior notice or obligation.

NO WARRANTY

THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY

APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,

INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,

RELIABILITY OR CONTENTS OF THIS MANUAL.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI

TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR

CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR

ANTICIPATED SAVINGS.

Import and Export Regulations

Customers shall comply with all applicable export or import laws and regulations and will

obtain all necessary governmental permits and licenses in order to export, re-export or

import the product mentioned in this manual including the software and technical data

therein.

Contents

Getting to Know the ME906A.........................................................................................................................1

Assembly................................................................................................................................................................4

Installation Guide................................................................................................................................................4

Thank you for purchasing HUAWEI ME906A LTE M.2 Module

(hereinafter referred to as the ME906A)

Note:

This manual briefly describes the preparation, the process for PCB Design, Assembly

and safety precautions.

It is recommended to read the manual before using the ME906A.

Getting to Know the ME906A

The ME906A module is 75 pin Gold Finger with a dimension of 42 mm × 30 mm ×

2.3mm. It is applied to the user interface board, and can be used as a wireless terminal

in a network environment.

Antenna interface

It is used to connect and fix an antenna.

Fixing hole

A screw, metal fastener, and nut are used to fix an ME906A module on a development board

through this fixing hole.

Gold Finger

It is connected to the M.2 connector on the development board.

Note:

In certain cases, your development board may be disassembled only by the

professionals.

Before you install the ME906A onto the development board, consult the development

board manufacturer or read the user manual of the development board.

Assembly

Through the M.2 connector

Installation Guide

Installing and Using an ME906A Module

1. Connect an antenna connector to the antenna interface of an ME906A.

Note:

Insert the antenna connectors vertically into the antenna interfaces of the ME906A.

Do not pinch the antenna cable or damage the connectors. Otherwise, the wireless

performance of the ME906A be reduced or the ME906A cannot work normally.

Ensure that the antenna is placed normally.

2. Fasten the golden finger in the ME906A module to a M.2 connector of a development

board to fix the ME906A module on the development board.

3. Place a metal fastener between the ME906A module and the development board. Put a

screw through the fixing hole of the ME906A, metal fastener, and fixing hole of the

development board in sequence. Then fasten a nut on the screw.

4. Insert a UIM card into the UIM card socket in the development board.

Removing an ME906A Module from a Development Board

1. Remove the UIM card from the UIM card socket.

2. Power off

3. Remove the screw on the ME906A module.

4. Remove the ME906A module from the development board.

5. Remove the antenna from the ME906A module.

Tabla de contenidos

Otros manuales de Unidad de control de Huawei

Huawei

Huawei ME909u-523 Guía del usuario

Huawei

Huawei ICD OPS D Series Manual de usuario

Huawei

Huawei SmartModule1000A01 Manual de usuario

Huawei

Huawei G530 V2 Guía de referencia rápida

Huawei

Huawei MU709s-2 Instrucciones de instalación

Huawei

Huawei MU509 Series Manual de usuario

Huawei

Huawei MU709s-2 Instrucciones de instalación

Huawei

Huawei ECC500 Manual de usuario

Huawei

Huawei MU709 Series Instrucciones de instalación

Huawei

Huawei MU509 Series Manual

Huawei

Huawei APM30H Manual de usuario

Huawei

Huawei MU736 HSPA+ M.2 Instrucciones de instalación

Huawei

Huawei MU709Gs-8 Manual de usuario

Huawei

Huawei CX116 Guía de referencia rápida

Huawei

Huawei SmartAX MA5811S-AE08 Manual de usuario

Huawei

Huawei EM770U Manual de usuario

Huawei

Huawei EM770S Manual de usuario

Huawei

Huawei VP9660 Manual de usuario

Huawei

Huawei MU203 Manual de usuario

Huawei

Huawei ME906E Manual de usuario

Huawei

Huawei ME906V Manual de usuario

Huawei

Huawei MU609 Manual

Huawei

Huawei MU709 Series Instrucciones de instalación

Huawei

Huawei ME919Bs-567bN Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario