Huawei ICD OPS D Series Manual de usuario

Table of Contents

1 Product Positioning and Highlights...................................................................................1

1.1 Product Positioning ................................................................................................1

1.2 Highlights................................................................................................................1

2 Application Scenarios .......................................................................................................3

3 Product Structure..............................................................................................................4

4 Operation and Maintenance .............................................................................................6

5 Technical Index .................................................................................................................7

ICD OPS D Series Product Overview

1 Product Positioning and Highlights

1.1 Product Positioning

ICD OPS D series are pluggable computer modules based on Intel® OPS specification

and integrated with Intel® 10th generation processors to meet the requirements of high

performance, low power consumption, and low space consumption. It reduces the

connection line and space occupation of the interactive IdeaHub, improves the overall

stability, and achieves easier and faster installation, upgrade and service convenience,

completing the design, deployment, and management of more cost-effective display

solutions.

1.2 Highlights

Simple Installation and Upgrade Maintenance

⚫As a standard embedded computer module of display equipment, OPS can

achieve an integrated solution with IdeaHub supporting the OPS interface,

eliminating the need for complex wiring and space for storing OPS.

⚫Equipped with hand screws. Installation and upgrade maintenance can achieve

without professional tools.

Figure 1-1 Installation method

screw

Lock

buckle

screw

Hand screw/

captive screw

ICD OPS D Series Product Overview

Three Independent 4K Video Output

⚫Support 1 * HDMI1.4, 1 * DP1.2, 80 Pin expansion interface 1*HDMI2.0.

⚫Strong codec ability. In addition to the display of the IdeaHub itself, dual-stream

(video image + conference data sharing) can be expanded. The content is more

explicit. The details are presented perfectly.

High-Performance Computing

⚫The latest platform processor of Intel® 10th generation;

⚫Dual channel memory, up to16GB;

⚫SSD.

System Backup

⚫Connect to the keyboard, press the power button to boot, hold down the Ctrl key

and keep pressing the F3 key until you enter the backup system prompt box.

Select [Yes] to back up the system, and wait for the completion to restart OPS

automatically.

System Recovery

⚫Connect to the keyboard, press the power button to boot, hold down the Ctrl key

and keep pressing the F4 key until you enter the recovery system. After waiting

for completion, you will restart OPS automatically.

ICD OPS D Series Product Overview

2 Application Scenarios

The ICD OPS D series is suitable for installing pluggable computers on IdeaHub with

baffles on the back. The application scenario is shown in Figure 2-1.

Figure 2-1 Application scenario

Wall

OPS computer

ICD OPS D Series Product Overview

3 Product Structure

ICD OPS D series is mainly composed of integrated chassis.

Whole Structure

The appearance of the ICD OPS D series is shown in Figure 3-1.

Figure 3-1 Appearance

Front Panel

The front panel of the ICD OPS D series is shown in Figure 3-2.

Figure 3-2 Front panel

Front panel O/I interface description:

•WIFI: WIFI antenna interface.

WIFI USB3.0 USB2.0

LOCK HOLE

DP HDMI

P-LED

HDD-LED

POWER-LED

LAN LINE-OUT

MIC-IN

RECOVER

POWER BUTTON

ICD OPS D Series Product Overview

•POWER BUTTON

•RECOVER: one-click recovery button.

•HDD_LED: hard disk indicator.

•POWER_LED: power indicator.

•P_LED: 80pin power-on indicator.

•LINE_OUT: audio output interface.

•MIC_IN: microphone Jack.

•DP: DP display interface.

•HDMI: HDMI display interface.

•USB3.0: USB3.0 interface.

•USB2.0: USB2.0 interface.

•LAN: RJ45 network interface.

•LOCK HOLE: burglar lock hole.

Rear Panel

The rear panel of the ICD OPS D series is shown in Figure 3-3.

Figure 3-3 Rear panel

JAE Conn: 80pin extension interface, containing the primary signal:

•Power supply

•HDMI and DisplayPort

•USB2.0 /3.0

•UART

ICD OPS D Series Product Overview

4 Operation and Maintenance

⚫OPS ON /OFF

1. Power on：

Press the O/I switch, the OPS computer will be boot up after the IdeaHub is turned

on.

2. Power off：

(1) No AC shutdown. Do not shutdown the OPS computer while it is running;

Figure 4-1 Schematic diagram of O/I switch

(2) O/I switch can be used to turn off OPS computer when it doesn't turn on or work,

please follow the next steps to turn off under other conditions: in the OPS

computer operating system, the OPS computer is shut down normally. The

indicator is off, and then use the "O/I" switch to shut down.

⚫Use OPS computer

1. The OPS computer has been installed on the back of the IdeaHub (when installing

or uninstalling the OPS computer, please make sure that the IdeaHub is power-off,

while it may cause computer to be abnormal).

2. Click the OPS computer icon in the lower-left corner of the IdeaHub homepage to

enter the OPS computer.

⚫Remove the OPS computer

1. No hot plugging. It is prohibited to directly unplug the OPS computer from the 80-pin

connector when the OPS computer is running or the display is turned on.

2. Ensure that both IdeaHub and OPS computers are not started or running. And the

sidelight on the front panel of IdeaHub has been turned off before you can pull out

the OPS computer from the plug-in terminals. Please pay attention to maintaining

the level of the OPS computer to avoid evident up and down twisting and pulling out.

O/I switch

ICD OPS D Series Product Overview

5 Technical Index

The physical parameters of the ICD OPS D series are shown in Figure 5-1.

Figure 5-1 Product specifications

Processor

Intel® Core™ i5/i7

Memory

DDR4 8/16GB

Storage

M.2 2280 128/512GB SSD

Display Controller

Intel® UHD Graphics 630

Audio

Integrated high-definition stereo sound card

HDMI output

HDMI1.4，support 4096*2160 P30

DP output

DP1.2，support 4096*2160 P30

Network

Wi-Fi /BT

Wi-Fi /BT 2-in-1. Wi-Fi supports 802.11

a/b/g/n/e/ac. BT supports bluetooth4.0

USB2.0

USB3.0

MIC IN

LINE OUT

JAE 80-pin

1*HDMI，2*USB2.0，1*USB3.0，UART

Power Supply

19V DC，4.74A

Size

195 mm（L）*180 mm（W）*30mm（H）

Windows 10 IoT EE

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de Huawei

Huawei

Huawei UPS5000-E Series Manual de usuario

Huawei

Huawei SmartLi-ESM-24020P1 Manual de usuario

Huawei

Huawei MC509 Instrucciones de instalación

Huawei

Huawei ME906A Instrucciones de montaje

Huawei

Huawei G530 V2 Guía de referencia rápida

Huawei

Huawei MU709s-2 Instrucciones de instalación

Huawei

Huawei ME906s LTE M.2 Instrucciones de instalación

Huawei

Huawei ME936 Instrucciones de instalación

Huawei

Huawei V100R001C00 Manual de usuario

Huawei

Huawei PDU5000 Manual de usuario

Huawei

Huawei ME909U-523D Manual de usuario

Huawei

Huawei ME909s-120 Instrucciones de instalación

Huawei

Huawei ME936 Guía del usuario

Huawei

Huawei UPS5000-H-1200K-NT Manual de usuario

Huawei

Huawei ME919Bs-567bN Manual de usuario

Huawei

Huawei EM770S Manual de usuario

Huawei

Huawei UPS5000-E Series Manual de usuario

Huawei

Huawei SmartAX MA5811S-AE08 Manual de usuario

Huawei

Huawei UPS5000-E-200K-SM Manual de usuario

Huawei

Huawei RRU5303 Manual de usuario

Huawei

Huawei EDFA0820-D Manual de funcionamiento

Huawei

Huawei MU736 HSPA+ M.2 Guía del usuario

Huawei

Huawei UPS5000-H-400K-NT Manual de usuario

Huawei

Huawei MU609T Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario