HighPoint SSD7000 Series Manual de usuario

Linux Debian on SSD7000 Installation Guide

SSD7000 Controller

Linux Debian

Installation Guide

Last updated on March 17, 2023

Linux Debian on SSD7000 Installation Guide

Table of Contents

1 Overview ......................................................................................................................................... 1

2 Installing Linux Debian on SSD7000 controller ......................................................................... 1

Step 1 Prepare Your Hardware for Installation ...........................................................................1

Step 2 Check System EFI Settings ............................................................................................. 1

Step 3 Flash UEFI Rom to SSD7000 ......................................................................................... 3

Step 4 Create Array .....................................................................................................................3

Step 5 Prepare the Driver Diskette ............................................................................................. 4

Step 6 Install Linux Debian ........................................................................................................ 5

3 Monitoring the Driver ................................................................................................................... 8

4 Installing RAID Management Software ...................................................................................... 8

5 Trouble Shooting ............................................................................................................................ 9

6 Rebuilding Driver Module for System Update ........................................................................... 9

Linux Debian on SSD7000 Installation Guide

- 1 -

1 Overview

The purpose of this document is to provide clear instructions on how to install Linux

Debian on the SSD7000 controller.

Supported system: Debian10.1 /10.2 /10.3 /10.4 /10.5 /10.6 /10.7/ 10.8/10.9/11.3/

11.4/11.5/11.6

Supported controller: SSD7580A/7580B/7540/7505/7502/7202/7105/7103

2 Installing Linux Debian on SSD7000 controller

If you would like to install Linux Debian onto drives attached to SSD7000 controller,

please perform the following operations:

Step 1 Prepare Your Hardware for Installation

After you attach your NVMe SSD to SSD7000 controller, you can use SSD7000 EFI

Utility to configure your NVMe SSD as RAID arrays, or just use them as single disks.

Before installation, you must remove all the NVMe SSD, which are not physically attached

to SSD7000 controller, from your system.

Note

SSD7000 only support EFI boot. If you have other SCSI adapters installed, you must

make sure the SSD7000 controller EFI will be loaded firstly. If not, try to move it to

another PCI slot. Otherwise you may be unable to boot up your system.

Step 2 Check System EFI Settings

In your system EFI SETUP menu, change Boot Sequence in such a way that the system

will first boot from EFI CDROM or EFI a USB flash drive, and then from SSD7000

RAID. Refer to your motherboard EFI manual to see how to set boot sequence.

If your EFI settings do not support such a boot sequence, you can first set it to boot from

EFI CDROM or EFI a USB flash drive. After you finish installation, set SSD7000 RAID

as the first boot device to boot up the system.

1. Set UEFI setting with SuperMicro X11DPi-NT motherboard as an example.

a. "Advanced->PCIe/PCI/PnP Configuration->CPUSlot PCI-E OPROM"

to "EFI". Suppose SSD7000 is connected to motherboard CPU1 Slot 2 PCI-E X16,

then you should set "CPU1 Slot 2 PCI-E X16 OPROM" to "EFI";

Linux Debian on SSD7000 Installation Guide

- 2 -

b. Disable "Secure Boot", set "Attempt Secure Boot" to "Disabled".

2. Set UEFI setting with ASUS PRIME X299 -DELUXE motherboard as an example:

a. Set "Boot from Storage Devices" to "UEFI driver first";

b. And "Boot Device Control" to "UEFI Only" or "UEFI and Legacy OPROM";

Linux Debian on SSD7000 Installation Guide

- 3 -

c. Set "OS Type" to "Other OS".

Step 3 Flash UEFI Rom to SSD7000

a. Unzip SSD7000 UEFI package to root dir(/) of a USB flash drive, and insert the

USB flash drive to the motherboard;

b. Booting from the UEFI USB flash and enter the UEFI environment;

c. Command with “go.nsh”, flash UEFI rom to SSD7000 Controller and reboot;

Step 4 Create Array

a. Attach four NVMe SSD to SSD7000 Controller;

Linux Debian on SSD7000 Installation Guide

- 4 -

Note

Make sure your USB flash partition format is NTFS or FAT32.

b. Boot, in the presence of the motherboard Log screen, there will be NVMe SSD

information：

c. Enter the motherboard’s Boot List and select start from UEFI USB flash:

d. Command “ArrayCreate.efi” to enter the Utility:

e. Command “create RAID0”.

Create RAID0 array with all disks and with maximum capacity.

f. Command “exit”；

g. For more command usages, refer to Appendix A.

Step 5 Prepare the Driver Diskette

Extract HighPoint_NVMe_Debian_11.6.0_x86_64_vx.x.x_xx_xx_xx.tar.gz to top(/)

Linux Debian on SSD7000 Installation Guide

- 5 -

directory of an USB flash drive. It will look like:

Step 6 Install Linux Debian

a. Before you do the following, verify the status of your network environment. To

ensure a proper installation, it is recommended to disconnect the network and install

the system in a network less environment.

b. Insert the USB flash drive to the target system.

c. Booting from Installation DVD disc (EFI mode).

d. When the Installation screen appears, press ‘e’ to edit boot command line option.

On the edit command window, move the cursor to the end of line "linux /install/vmlinuz...

", and append "modprobe.blacklist=nvme " (double quotation mark are not include).

Press CTRL-x or F10 to start the system.

e. When the following window appears during the installation process,

Press "Ctrl+ALT+F2" to switch to the shell on console 2, and the then execute following

commands to copy the driver contents:

Linux Debian on SSD7000 Installation Guide

- 6 -

# mkdir /hptdd ← Create mount point for USB flash drive

# mount /dev/sda1 /hptdd/ ← Mount the USB flash drive to /hptdd

# cp -a /hptdd/hptdd /tmp/ ← Copy driver installation file to system temporary

directory

# umount /hptdd ← Unmount the USB flash drive

When the USB flash drive is unmounted, please unplug the USB flash drive from the

mainboard. And then execute following command to install driver to install the Linux

Debian.

# sh /tmp/hptdd/preinst.sh ← Load SSD7000 driver.

f. Then press “Ctrl+ALT+F5” to switch back to installation screen and continue the

installation as usual.

g. Now click the “Go Back” button to detect the hptnvme disk.

h. Now click the “Detect disks” button and “Continue” to detect the hptnvme disk.

Linux Debian on SSD7000 Installation Guide

- 7 -

i. When the screen shows that “Finish the installation”.

press “Ctrl+ALT+F2” to the shell and type the following commands:

#sudo sh /tmp/hptdd/postinst.sh ← Install SSD7000 driver.

A message will be displayed that the driver has been installed successfully.

j. Press “Ctrl+ALT+F5” to switch back to installation screen and finish the installation.

k. Opensource driver needs to be installed after system installation, please connect to the

internet:

Linux opensource driver link, open the following link to enter the "Software Download"

page to download:

SSD7502/7505/7540: https://www.highpoint-tech.com/gen4-nvme-m2

SSD7105/7202: https://www.highpoint-tech.com/gen3-nvme-m2-bootable

SSD7580A/7580B: https://www.highpoint-tech.com/gen4-nvme-u2

Run the .bin file to install the driver package.

sh hptnvme_g5_linux_src_vxx.x.x_xx_xx_xx.bin

Linux Debian on SSD7000 Installation Guide

- 8 -

l. Follow the prompts to complete the driver installation.

m. After the installation is complete, you can perform system update operations.

3 Monitoring the Driver

Once the driver is running, you can monitor it through the Linux proc file system support.

There is a special file under /proc/scsi/hptnvme /. Through this file you can view driver

status and send control commands to the driver.

Note

The file name is the SCSI host number allocated by OS. If you have no other SCSI cards

installed, it will be 0. In the following sections, we will use x to represent this number.

Using the following command to show driver status:

#cat /proc/scsi/hptnvme /x

This command will show the driver version number, physical device list and logical device

list.

4 Installing RAID Management Software

HighPoint RAID Management Software is used to configure and keep track of your hard

disks and RAID arrays attached to SSD7000 controller. Installation of the management

software is optional but recommended.

Please refer to HighPoint RAID Management Software documents for more information.

Otros manuales para SSD7000 Series

Tabla de contenidos

Otros manuales de Controladores de HighPoint

HighPoint

HighPoint RocketRAID 3G mini-SAS HBA Series Manual de usuario

HighPoint

HighPoint SSD7103 Manual de usuario

HighPoint

HighPoint SSD7103 Manual de usuario

HighPoint

HighPoint RocketU 1142A Manual de usuario

HighPoint

HighPoint SSD7505 Manual de usuario

HighPoint

HighPoint R1000 Series Manual de usuario

HighPoint

HighPoint Rocket 700 Series Manual de usuario

HighPoint

HighPoint RocketRAID 2711 Manual de usuario

HighPoint

HighPoint Rocket 700L Series Manual de usuario

HighPoint

HighPoint Rocket 760A Manual de usuario

HighPoint

HighPoint RocketRAID 2840A Manual de usuario

HighPoint

HighPoint RocketRAID 644L Manual de usuario

HighPoint

HighPoint SSD7105 Manual de usuario

HighPoint

HighPoint SSD7110 Manual de usuario

HighPoint

HighPoint RocketU 1144B Manual de usuario

HighPoint

HighPoint Rocket 710L Manual de usuario

HighPoint

HighPoint SSD7110 Hoja de instrucciones

HighPoint

HighPoint Rocket 700 Series Manual de usuario

HighPoint

HighPoint RocketRAID 3G mini SAS HBA Series Manual de usuario

HighPoint

HighPoint RocketRAID eSATA 6G series Manual de usuario

HighPoint

HighPoint SSD7540 Manual de usuario

HighPoint

HighPoint RR640L Manual de usuario

HighPoint

HighPoint RocketRAID 174x Manual de usuario

HighPoint

HighPoint SSD7103 Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario