HighPoint SSD7101A-1 Manual de usuario

1

SSD7101A-1

4x M.2 Port to PCIe 3.0x16 NVMe RAID Controller

Quick Installation Guide

V1.05

2

System Requirements

PC Requirements

•System with a free PCIe 4.0 x16 or PCIe3.0 x16 slot

•Windows 11, 10 / Server 2022, 2019, 2016, 2012R2 / Microsoft

Hyper-V

•RHEL/Debian/Ubuntu/Fedora/Proxmox/Xenserver /Rocky Linux

(Linux kernel 3.10 and later)

•Arch Linux (Kernel 5.17.5 and above)

•macOS 10.13.6 ~ macOS 13.x

SSD7101A-1 Kit Contents

•SSD7101A-1 Controller Card

•Quick Installation Guide

3

SSD7101A-1 Hardware

Front View

Low-Noise cooling fan

Aluminum casing with integrated thermal pad

PCIe 3.0 x16 Host Interface

Intake for cooling fan

4

Hardware Installation:

Step 1. On the rear of the SSD7101A-1, remove the six screws that

secure the unit’s front panel to the PCB.

After removing the screws, carefully remove the front panel from the

SSD7101A-1.

Step 2. After removing the casing, carefully turn it over to view the

thermal pad. The blue film must be removed from the pad before

reinstalling the panel. This film protects the pad from damage and

foreign objects prior to installation, however, it can also prevent the

thermal pad form conducting the heat away from the NVMe SSD's if

we don't remove it.

5

Step 3. These 4 screws are used to install the NVMe SSD’s.

Step 4. The SSDs should be installed from top to bottom. Remove the

top screw.

Step 5. Gently insert the SSD into the slot.

6

Note: Please make sure all disks are clean before you insert them

into the slot to avoid unexpected situations.

Step 6. Refasten the screw to secure the SSD.

Repeat Steps 4 to 6 to install the remaining SSDs.

Note: Make sure the SSDs are carefully, but securely installed into

each M.2 port. Loose connections can cause a variety of stability

and performance issues, and may ultimately result in data loss.

The following example shows four SSDs installed into Port 1, 2, 3

& 4;

Step 7. Replace the front panel after installing all SSDs.

Port

Port

Port

Port

7

Step 8. On the rear of the SSD7101A-1, refasten the 6 screws that were

removed in step 1.

Note

：

Make sure the aluminum cover is properly aligned with the

controller board (PCB), and that it makes full contact with the thermal

pad, before refastening it to the SSD7101A-1. If the cover is improperly

installed, the fan and thermal pad will be unable to sufficiently cool the

NVMe SSD’s and controller componentry, which may result in damage

to the SSD’s or controller hardware, performance loss, unstable I/O,

and the loss of data.

Note: Please be sure to connect NVMe before using the product to

reduce the occurrence of unnecessary errors!

Note: Install the driver in the system first and then install the board

!

8

Resources

A variety of manuals, guides and FAQ’s are available for the

SSD7101A-1 RAID controller.

In addition, we recommend visiting the Software Downloads webpage

for the latest drivers, management interfaces, and installation guides.

For Software Downloads, Documentation and more information

about this product, please visit the following website:

https://www.highpoint-tech.com/gen3-nvme-m2-non-bootable

FAQ & Troubleshooting:

FAQ - HighPoint Technologies, Inc. (helpjuice.com)

9

Customer Support

If you encounter any problems while utilizing the SSD7101A-1, or have

any questions about this or any other HighPoint Technologies, Inc.

product, feel free to contact our Customer Support Department.

Web Support:

https://www.highpoint-tech.com/support-and-services

HighPoint Technologies, Inc. websites:

https://www.highpoint-tech.com

© Copyright 2022 HighPoint Technologies, Inc. All rights reserved.

Otros manuales para SSD7101A-1

3

Tabla de contenidos

Otros manuales de Controladores de HighPoint

HighPoint

HighPoint Rocket 760A Manual de usuario

HighPoint

HighPoint SSD7120 Manual de usuario

HighPoint

HighPoint ATA-133 RAID Manual de usuario

HighPoint

HighPoint RocketRAID 2722A Manual de usuario

HighPoint

HighPoint RocketRAID 3G mini-SAS HBA Series Manual de usuario

HighPoint

HighPoint RocketRAID 2840A Manual de usuario

HighPoint

HighPoint SSD7000 Series Manual de usuario

HighPoint

HighPoint SSD7103 Manual de usuario

HighPoint

HighPoint Rocket 700 Series Manual de usuario

HighPoint

HighPoint SSD7000 Series Manual de usuario

HighPoint

HighPoint RocketRAID 2711 Manual de usuario

HighPoint

HighPoint SSD7580B Manual de usuario

HighPoint

HighPoint Rocket 620 Manual de usuario

HighPoint

HighPoint SSD7110 Manual de usuario

HighPoint

HighPoint RocketRAID 174x Manual de usuario

HighPoint

HighPoint Rocket Dual eSATA 6Gb/s For Mac Manual de usuario

HighPoint

HighPoint SSD7505 Manual de usuario

HighPoint

HighPoint SSD7103 Manual de usuario

HighPoint

HighPoint Rocket 700L Series Manual de usuario

HighPoint

HighPoint RocketU 1144B Manual de usuario

HighPoint

HighPoint SSD7103 Manual de usuario

HighPoint

HighPoint RocketRAID mini-SAS 6G HBA Series Manual de usuario

HighPoint

HighPoint RR64 L Series Manual de usuario

HighPoint

HighPoint SSD7180 Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario