HighPoint R1000 Series Manual de usuario

1

R1108

8x M.2 Port to PCIe 3.0x16 NVMe HBA

Quick Installation Guide

V1.00

2

System Requirements

PC Requirements

•System with a free PCIe3.0 (or 4.0) x16 slot

•Windows 10 or later, Windows Server 2019

•Linux Kernel 3.10 or later

•macOS 10.13 or later

•FreeBSD 12.1 and later

R1108 Kit Content

•R1108 Controller Card

•Quick Installation Guide

3

R1108 Hardware

Front View

Low-Noise fans

Full-length anodized aluminum heat sink

PCIe 3.0 x16 Host Interface

4

R1108 Hardware Installation:

Step 1. On the rear of the R1108, remove the six screws that secure the

unit’s heat sink to the PCB.

Step 2. Carefully remove fan’s power cable from the right-side of the

heatsink as shown below, then carefully flip the heatsink to the

left (like turning a page from a book).

Note: Take care when moving the heatsink to prevent damaging

the left fan’s power cable.

5

Step 3. This will expose the two thermal pads. The blue film must be

removed from each pad before reinstalling this panel. This film

protects the pads from damage and foreign objects prior to

installation, but will also prevent the pad from transferring heat

away from the NVMe SSD’s and controller componentry.

Step 4. These 8 screws are used to install the NVMe SSD’s.

6

Step 5. Please remove these screws from each of the M.2 slots.

Step 6. Gently insert the SSD into the slot.

Step 7. Refasten the screw to secure the SSD.

Repeat Steps 5 to 7 to install the remaining SSDs.

The following example shows eight M.2 SSDs installed into Ports 1-8:

7

Step 8. After installing all SSDs, carefully flip the heatsink to the right.

Note: Make sure the SSD’s are carefully, but securely installed

into each M.2 port. Loose connections can cause a variety of

stability and performance issues, and may ultimately result in

data loss.

Note: Make sure the heatsink/fan panel is properly aligned with

the controller board (PCB), and that it makes full contact with the

thermal pads before refastening it to the NVMe HBA. If the

heatsink is improperly installed, it will be unable to sufficiently

cool the NVMe SSD’s and controller componentry, which may

result in damage to the SSD’s or controller hardware,

performance loss, unstable I/O, and the loss of data.

Step 9. Carefully reinsert in the power supply cable of the cooling fan

that was removed in step 2.

8

Step 10. On the rear of the R1108, refasten the 6 screws that were

removed in step 1.

Step 11. Power up the SSD external power supply

Note: If the external power supply is not powered on, the SSDs

may drop offline or remain undetected, which could lead to data

loss.

R1108 relies on two power sources to support eight SSDs; power

supplied through the PCIe bus, and power from the system’s PSU

via an external power cable. If the external cable is not connected,

there will be insufficient power to support all 8 SSD’s; this may

cause the SSDs to drop offline.

9

Note

：

The R1108 does not require the external power cord when

used with 2019 Mac Pro systems.

10

Resources

We recommend visiting the R1108 Series Product Page for the latest

documentation.

Document Downloads:

https://www.highpoint-tech.com/USA_new/series-r1000-fan-overview.html

Customer Support

If you encounter any problems while utilizing the R1108, or have any

questions about this or any other HighPoint Technologies, Inc. product,

feel free to contact our Customer Support Department.

Web Support:

https://www.highpoint-tech.com/websupport/main.php

HighPoint Technologies, Inc. websites:

https://www.highpoint-tech.com

© Copyright 2021 HighPoint Technologies, Inc. All rights reserved.

Otros manuales para R1000 Series

2

Este manual sirve para los siguientes modelos

2

Tabla de contenidos

Otros manuales de Controladores de HighPoint

HighPoint

HighPoint RocketRAID 272 Series Manual de usuario

HighPoint

HighPoint SSD7505 Manual de usuario

HighPoint

HighPoint RocketRAID 3G mini SAS HBA Series Manual de usuario

HighPoint

HighPoint RocketRAID 2711 Manual de usuario

HighPoint

HighPoint RocketRAID mini SAS 3G HBA Series Manual de usuario

HighPoint

HighPoint SSD7180 Manual de usuario

HighPoint

HighPoint SSD7505 Manual de usuario

HighPoint

HighPoint SSD7580B Manual de usuario

HighPoint

HighPoint ATA-133 RAID Manual de usuario

HighPoint

HighPoint RR64 L Series Manual de usuario

HighPoint

HighPoint Rocket 620 Manual de usuario

HighPoint

HighPoint SSD7540 Manual de usuario

HighPoint

HighPoint RocketRAID 37 Series Manual de usuario

HighPoint

HighPoint Rocket 700L Series Manual de usuario

HighPoint

HighPoint RocketRAID 2722A Manual de usuario

HighPoint

HighPoint SSD7103 Manual de usuario

HighPoint

HighPoint RR640L Manual de usuario

HighPoint

HighPoint Rocket 760A Manual de usuario

HighPoint

HighPoint RocketRAID eSATA 6G series Manual de usuario

HighPoint

HighPoint SSD6202A Manual de usuario

HighPoint

HighPoint SSD7749M Manual de usuario

HighPoint

HighPoint RocketU 1144B Manual de usuario

HighPoint

HighPoint Rocket Dual eSATA 6Gb/s For Mac Manual de usuario

HighPoint

HighPoint SSD7110 Hoja de instrucciones

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario