HBM C16A Series Manual de usuario
Operating Manual | Bedienungsanleitung |
Manuel d'emploi
English Deutsch Français
C16A
Hottinger Baldwin Messtechnik GmbH
Im Tiefen See 45
D-64239 Darmstadt
Tel. +49 6151 803-0
Fax +49 6151 803-9100
www.hbm.com
Mat.: 7-2002.5000
DVS: A1460-4.0 HBM: public
03.2017
EHottinger Baldwin Messtechnik GmbH.
Subject to modifications.
All product descriptions are for general information only.
They are not to be understood as a guarantee of quality or
durability.
Änderungen vorbehalten.
Alle Angaben beschreiben unsere Produkte in allgemeiner
Form. Sie stellen keine Beschaffenheits- oder Haltbarkeits
garantie dar.
Sous réserve de modifications.
Les caractéristiques indiquées ne décrivent nos produits
que sous une forme générale. Elles n'impliquent aucune
garantie de qualité ou de durabilité.
Operating Manual | Bedienungsanleitung |
Manuel d'emploi
English Deutsch Français
C16A
2A1460-4.0 HBM: public C16A
English
1 Safety instructions 4........................................
2 Markings used 8............................................
2.1 Symbols on the device 8......................................
2.2 The marking used in this document 8...........................
3 Scope of delivery 9.........................................
3.1 Thrust piece mounting accessories (to be ordered separately) 9....
3.2 Ground cable mounting accessories (to be ordered separately) 10...
4 Function 11.................................................
5 Conditions on site 12........................................
6 Mechanical installation 13....................................
6.1 Important precautions during installation 13......................
6.2 Preparation for installation 14...................................
6.3 Assembly sequence 15........................................
6.4 Procedure for special installation situations 18....................
7 Electrical connection 21......................................
7.1 Connection in six-wire configuration 22..........................
7.2 Shortening the cable 22.......................................
7.3 Cable extension 23...........................................
7.4 Parallel connection 23.........................................
7.5 EMC protection 24............................................
8 Maintenance and Cleaning 25................................
9 Waste disposal and environmental protection 26..............
10 Specifications 27............................................
10.1 C16A D1 27..................................................
10.2 C16A C3 30..................................................
C16A A1460-4.0 HBM: public 3
10.3 Options for C16A 32..........................................
11 Dimensions 33..............................................
11.1 Dimensions and mounting parts for maximum capacity 20t to 60t 33.
11.2 Dimensions and mounting parts for maximum capacity 100t to 400t 36
11.3 Dimensions of load cells with EExd design 38....................
Safety instructions
4A1460-4.0 HBM: public C16A
1 Safety instructions
Appropriate use
Transducers of the C16A type series are designed solely
for technical weighing applications within the application
limits detailed in the specifications. Any other use is not
appropriate.
Any person instructed to carry out installation, commis
sioning or operation of the transducer must have read
and understood the Operating Manual and in particular
the technical safety instructions.
In the interests of safety, the transducer should only be
operated by qualified personnel and as described in the
Operating Manual. It is also essential to comply with the
legal and safety requirements for the application con
cerned during use. The same applies to the use of ac
cessories.
The transducer is not intended for use as a safety com
ponent. Please also refer to the section: "Additional
safety precautions". Proper and safe operation requires
proper transportation, correct storage, siting and mount
ing, and careful operation.
Operating conditions
SPlease observe the permissible maximum values
stated in the specifications for:
- Limit load
- Limit load at max. eccentricity
- Limit lateral loading
- Breaking loads
- Temperature limits
- Limits of electrical loading capacity
Safety instructions
C16A A1460-4.0 HBM: public 5
SNote, that when several transducers are installed in a
scale, there is not always an even distribution of load
on the individual transducers.
SThe transducers can be used as machine elements.
When used in this manner, it must be noted that, to
favor greater sensitivity, the transducer is not de
signed with the safety factors usual in mechanical en
gineering.
SThe transducer must not be modified from the design
or safety engineering point of view except with our
express agreement.
SThe transducer is maintenance-free.
SIn accordance with national and local environmental
protection and material recovery and recycling regula
tions, old transducers that can no longer be used
must be disposed of separately and not with normal
household garbage, see Chapter 9, Page 26.
Explosion protection version option
The following also apply to the transducers, supplied with
this option, that are to be used in potentially explosive
atmospheres:
SIt is essential to comply with the legal code of practice
during installation.
SThere must be compliance with the installation condi
tions cited in the Certificate of Conformity and/or the
Type Examination Certificate.
SThe ambient temperature range specified on the
transducer must not be exceeded.
Safety instructions
6A1460-4.0 HBM: public C16A
Qualified Personnel
Qualified persons means persons entrusted with the in
stallation, fitting, commissioning and operation of the
product who possess the appropriate qualifications for
their function.
This includes people who meet at least one of the three
following requirements:
SKnowledge of the safety concepts of measurement
and automation technology is a requirement and as
project personnel, they must be familiar with these
concepts.
SAs measurement or automation plant operating per
sonnel, they have been instructed how to handle the
machinery. They are familiar with the operation of the
equipment and technologies described in this docu
mentation.
SAs commissioning engineers or service engineers,
they have successfully completed the training to qual
ify them to repair the automation systems. They are
also authorized to activate, ground and label circuits
and equipment in accordance with safety engineering
standards.
Additional safety precautions
Additional safety precautions to meet the requirements of
the relevant national and local accident prevention regu
lations must be taken in plants where malfunctions could
cause major damage, loss of data or even personal in
jury.
The scope of supply and performance of the transducer
covers only a small area of measurement technology.
Before starting up the transducer in a system, a project
planning and risk analysis must first be implemented,
Safety instructions
C16A A1460-4.0 HBM: public 7
taking into account all the safety aspects of measure
ment and automation technology so that residual risks
are minimized. This particularly concerns personal and
machine protection. The transducers function passively
and cannot implement any (safety-relevant) cutoffs. In
the event of a fault, the relevant precautions must estab
lish safe operating conditions.
General dangers of failing to follow the safety
instructions
The transducer corresponds to the state of the art and is
failsafe. The transducer may give rise to residual dangers
if it is inappropriately installed or operated.
Markings used
8A1460-4.0 HBM: public C16A
2 Markings used
2.1 Symbols on the device
CE certification
The CE mark enables the manufacturer to guarantee that
the product complies with the requirements of the relev
ant EC directives (the Declaration of Conformity can be
found on the HBM website (www.hbm.com) under HBM
doc).
2.2 The marking used in this document
Important instructions for your safety are specifically
identified. It is essential to follow these instructions in or
der to prevent accidents and damage to property.
Symbol Significance
WARNING This marking warns of a potentially dangerous situ
ation in which failure to comply with safety require
ments can result in death or serious physical injury.
Note This marking draws your attention to a situation in
which failure to comply with safety requirements
could lead to damage to property.
Important
This marking draws your attention to important in
formation about the product or about handling the
product.
Tip
This marking indicates application tips or other in
formation that is useful to you.
Emphasis
See …
Italics are used to emphasize and highlight text and
identify references to sections, diagrams, or external
documents and files.
Otros manuales para C16A Series
2
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Idiomas:
Otros manuales de Transductor de HBM
HBM
HBM Z30 Manual de usuario
HBM
HBM AED9101D Manual de usuario
HBM
HBM Z4A Manual de usuario
HBM
HBM AD104-R2 Manual de usuario
HBM
HBM Z8 Manual de usuario
HBM
HBM CFT+ Series Manual de usuario
HBM
HBM FIT 7A Manual de usuario
HBM
HBM U15 Series Manual de usuario
HBM
HBM DD1 Series Manual de usuario
HBM
HBM T40B Manual de usuario
HBM
HBM U10M Manual de usuario
HBM
HBM U5 Series Manual de usuario
HBM
HBM C9B Manual de usuario
HBM
HBM C4 Manual de usuario
HBM
HBM T40MS Manual de usuario
HBM
HBM S2M Series Manual de usuario
HBM
HBM SLB-700A Manual de usuario
HBM
HBM T22 Manual de usuario
HBM
HBM Paceline CFT Manual de usuario
HBM
HBM Z16A Manual de usuario
Manuales populares de Transductor de otras marcas
Camille Bauer
Camille Bauer SINEAX F534 Manual de usuario
Trane
Trane KIT 16724 Instrucciones de montaje
Lumel
Lumel P18 Manual de usuario
B&C Speakers
B&C Speakers DE75PTN Manual de usuario
MAMAC SYSTEMS
MAMAC SYSTEMS PR-243 Manual
Mianyang Weibo Electronic
Mianyang Weibo Electronic WB Series Manual de usuario
