Emerson Rosemount 5408 Manual de usuario

Quick Start Guide

00825-0800-4408, Rev AA

February 2020

Rosemount™ 5408 Level Transmitter

with Modbus® Protocol

Contents

About this guide...........................................................................................................................3

Confirm approval type..................................................................................................................5

Components of the parabolic antenna......................................................................................... 6

Mount the transmitter..................................................................................................................7

Adjust the inclination of the antenna..........................................................................................11

Plug and seal the air purge entry.................................................................................................14

Adjust display orientation (optional).......................................................................................... 15

Prepare the electrical connections..............................................................................................16

Connect wiring and power up.....................................................................................................19

Performance specifications........................................................................................................ 23

Functional specifications............................................................................................................ 25

Physical specifications................................................................................................................ 27

Quick Start Guide February 2020

2 Rosemount 5408 Level Transmitter

1 About this guide

This Quick Start Guide provides basic guidelines for the Rosemount 5408

Level Transmitter with Modbus® Protocol.

WARNING

Failure to follow safe installation and servicing guidelines could result in

death or serious injury.

•Ensure the transmitter is installed by qualified personnel and in

accordance with applicable code of practice.

•Use the equipment only as specified in this Quick Start Guide. Failure to

do so may impair the protection provided by the equipment.

•For installations in hazardous locations, the transmitter must be installed

according to the Rosemount 5408 Product Certifications document and

System Control Drawing (D7000005-811).

•Repair, e.g. substitution of components, etc. may jeopardize safety and

is under no circumstances allowed.

Explosions could result in death or serious injury.

•Verify that the operating atmosphere of the transmitter is consistent

with the appropriate hazardous locations certifications.

•Before connecting a handheld communicator in an explosive

atmosphere, ensure the instruments are installed in accordance with

intrinsically safe or non-incendive field wiring practices.

•In Explosion-proof/Flameproof installations, do not remove the

transmitter covers when power is applied to the unit.

•Both transmitter covers must be fully engaged to meet Explosion-proof/

Flameproof requirements.

Electrical shock could cause death or serious injury.

•In Explosion-proof/Flameproof installations, avoid contact with the leads

and terminals. High voltage that may be present on leads can cause

electrical shock.

•Ensure the mains power to the transmitter is off and the lines to any

other external power source are disconnected or not powered while

wiring the transmitter.

February 2020 Quick Start Guide

Quick Start Guide 3

WARNING

Process leaks could result in death or serious injury.

•Ensure that the transmitter is handled carefully. If the process seal is

damaged, gas might escape from the tank.

WARNING

Physical access

Unauthorized personnel may potentially cause significant damage to and/or

misconfiguration of end users’ equipment. This could be intentional or

unintentional and needs to be protected against.

Physical security is an important part of any security program and

fundamental to protecting your system. Restrict physical access by

unauthorized personnel to protect end users’ assets. This is true for all

systems used within the facility.

CAUTION

Hot surfaces

The flange and process seal may be hot at high process temperatures. Allow

to cool before servicing.

Quick Start Guide February 2020

4 Rosemount 5408 Level Transmitter

2 Confirm approval type

For hazardous locations transmitters labeled with multiple approval types:

Procedure

Permanently mark the checkbox of the selected approval type(s).

Figure 2-1: Label with Multiple Approval Types

February 2020 Quick Start Guide

Quick Start Guide 5

3 Components of the parabolic antenna

3.1 Components of the threaded version

Figure 3-1: Components

[([*['[&[%[$[)

A. Antenna

B. Purge plug kit (blind plug and bonded seal)

C. Threaded sleeve

D. M20 adapter

E. Lock nut BSPP (G) 3½-in.

F. Antenna adapter with ball joint

G. O-ring

Quick Start Guide February 2020

6 Rosemount 5408 Level Transmitter

4 Mount the transmitter

4.1 Mount the threaded version

Procedure

1. Remove the lock nut.

2. Mount the O-ring.

3. Mount the antenna adapter on the mounting flange plate. Ensure the

antenna adapter fits tightly to the mounting flange plate.

A. Ø 3.98 ± 0.02 in. (Ø 101 ± 0.6 mm) or G 3½-in.

B. Max. 0.59 in. (15 mm)

February 2020 Quick Start Guide

Quick Start Guide 7

4. Remove the M20 adapter and visually inspect the O-rings for damage

and dirt.

5. Carefully insert the antenna.

6. Secure the antenna.

27 mm

Torque 180 in-lb (20 N-m)

Quick Start Guide February 2020

8 Rosemount 5408 Level Transmitter

7. Tighten the set screw.

H2 mm

Torque 5 in-lb (0.5 N-m)

8. Position the antenna assembly onto the mounting frame.

Example

Deck/platform mounted

9. Tighten the bolts and nuts.

It is recommended that insulating bushes are fitted to the mounting

bolts.

February 2020 Quick Start Guide

Quick Start Guide 9

Postrequisites

1. Adjust the inclination of the antenna (see Adjust the inclination of

the antenna).

2. Plug and seal the air purge entry (see Plug and seal the air purge

entry).

Quick Start Guide February 2020

10 Rosemount 5408 Level Transmitter

Otros manuales para Rosemount 5408

Tabla de contenidos

Otros manuales de Transmisor de Emerson

Emerson

Emerson Rosemount 3144P Manual de usuario

Emerson

Emerson Rosemount 148 Manual de usuario

Emerson

Emerson Rosemount 705 Manual de usuario

Emerson

Emerson Rosemount 708 Manual de usuario

Emerson

Emerson Micro Motion 5700 Guía rápida

Emerson

Emerson MAS 2600 Manual de usuario

Emerson

Emerson Micro Motion ELITE Manual de usuario

Emerson

Emerson Rosemount OCX 8800 Manual de usuario

Emerson

Emerson Rosemount 644 HART Manual de usuario

Emerson

Emerson Rosemount 3144P Manual de usuario

Emerson

Emerson PT4 Manual de usuario

Emerson

Emerson Rosemount ET310C Manual de usuario

Emerson

Emerson Micro Motion IFT9701 Manual de usuario

Emerson

Emerson Rosemount 3051 Manual de usuario

Emerson

Emerson Rosemount 4600 Manual de usuario

Emerson

Emerson Rosemount 5408 Manual de usuario

Emerson

Emerson Micro Motion 5700 Manual de usuario

Emerson

Emerson Rosemount FCL-01 Manual de usuario

Emerson

Emerson Rosemount 6888A Manual de usuario

Emerson

Emerson Rosemount 644 Manual de usuario

Emerson

Emerson Rosemount 8712EM Manual de usuario

Emerson

Emerson Micro Motion 800 Manual de usuario

Emerson

Emerson Micro Motion 1000 Series Guía rápida

Emerson

Emerson Rosemount 2051 Wireless Series Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario