Elko EKO09765 Manual de usuario

ELKO – Smart Radiator Thermostat

Device User Guide

Commissioning instructions for the ELKO Smart system, devices and app.

03/2023

www.elko.no

Legal Information

The ELKO brand and any trademarks of ELKO AS and its subsidiaries referred to in

this guide are the property of ELKO AS or its subsidiaries. All other brands may be

trademarks of their respective owners.

This guide and its content are protected under applicable copyright laws and

furnished for informational use only. No part of this guide may be reproduced or

transmitted in any form or by any means (electronic, mechanical, photocopying,

recording, or otherwise), for any purpose, without the prior written permission of

ELKO.

ELKO does not grant any right or license for commercial use of the guide or its

content, except for a non-exclusive and personal license to consult it on an "as

is" basis. ELKO products and equipment should be installed, operated,

serviced, and maintained only by qualified personnel.

As standards, specifications, and designs change from time to time, information

contained in this guide may be subject to change without notice.

To the extent permitted by applicable law, no responsibility or liability is assumed by

ELKO and its subsidiaries for any errors or omissions in the informational content of

this material or consequences arising out of or resulting from the use of the

information contained herein.

Table of Contents

Safety information.......................................................................................4

Smart Radiator Thermostat.......................................................................5

For your safety ..........................................................................................5

About the device.........................................................................................6

Installing the device ....................................................................................6

Pairing the device .......................................................................................7

Pairing device manually.........................................................................7

Pairing device with auto scan.................................................................9

Configuring the device ..............................................................................10

Changing the device icon ....................................................................10

Renaming the device .......................................................................... 11

Changing the device location ............................................................... 11

Removing the device ................................................................................12

Resetting the device .................................................................................12

Using the device.......................................................................................13

Individual thermostat visibility in home page..........................................14

Setting the room temperature manually ................................................14

Setting the room temperature using app ...............................................15

Using the boost mode .........................................................................17

Checking the device history .................................................................19

Creating a Schedule............................................................................20

Activating the child Lock ......................................................................20

Creating a moment .............................................................................21

Creating an automation .......................................................................23

Replacing the batteries .............................................................................27

LED indications ........................................................................................27

Troubleshooting .......................................................................................28

Technical data ..........................................................................................29

DUG_ITRV_ELKO-00 3

Safety information

Important information

Read these instructions carefully and look at the equipment to become familiar

with the device before trying to install, operate, service, or maintain it. The

following special messages may appear throughout this manual or on the

equipment to warn of potential hazards or to call attention to information that

clarifies or simplifies a procedure.

The addition of either symbol to a “Danger” or “Warning” safety label indicates

that an electrical hazard exists which will result in personal injury if the

instructions are not followed.

This is the safety alert symbol. It is used to alert you to potential personal injury

hazards. Obey all safety messages that accompany this symbol to avoid possible

injury or death.

DANGER

DANGER indicates a hazardous situation which, if not avoided, will result in

death or serious injury.

Failure to follow these instructions will result in death or serious injury.

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result

in death or serious injury.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, could result in

minor or moderate injury.

NOTICE

NOTICE is used to address practices not related to physical injury.

4 DUG_ITRV_ELKO-00

Smart Radiator Thermostat

EKO09765

For your safety

NOTICE

RISK OF DAMAGE TO DEVICE

• Make sure that the O-ring is seated firmly on the thread.

• The ring nut should be tightened by hand, do not use any tools. Do not tighten

too hard.

Failure to follow these instructions can result in equipment damage.

DUG_ITRV_ELKO-00 5

Smart Radiator Thermostat

About the device

The Smart Radiator Thermostat (hereinafter referred to as Thermostat) uses

integrated temperature sensors to control the flow of water through a radiator,

thereby regulating the temperature in a room. The target temperature and the

switching times are set in the ELKO Smart app.

Personalize your home heating by adding a Thermostat to your ELKO Smart

system. This provides an effortless control to set different schedules and

temperatures in different rooms, and upgrading to room-to-room heating control

could save energy usage. Thermostats provide ultimate comfort, convenience and

practicality.

Intended use:

• Individual room control

• Mobile control anytime, anywhere with the ELKO Smart app

• Boost mode for ease and comfort.

Diagram of operating elements

A. 3 status LEDs

B. Twistable cap

C. Chrome ring nut.

Installing the device

Refer to the installation instruction supplied with this product.

See Smart Radiator Thermostat.

6 DUG_ITRV_ELKO-00

Smart Radiator Thermostat

Pairing the device

Using the ELKO Smart app, pair your device with the ELKO SmartHub to access

and control the device. You can either add the device manually or do an auto-scan

to pair it.

Pairing device manually

To pair the device manually:

NOTE: Remember to insert the batteries to power On the device.

1. On the Home page, tap +.

2. Tap , select the ELKO SmartHUB and tap Done.

3. Select an option to add the device (A):

–Add Device with Install Code

–Add Device without Install Code

Add Device

Install Code is Recommended

Add Device without Install Code

4. To pair the device with install code, tap Add Device with Install Code to

display the slide-up menu. Select any one of the options (B):

–Scan Install Code - You can scan the device for the install code.

–Enter Install Code Manually - You can manually enter the install code

from the device.

After pairing the device with install code, proceed to Step 6.

Add Device

Install Code is Recommended

Add Device without Install Code

Add Device

Install Code is Recommended

TIP: It is highly recommended to add the device with install code.

5. To pair the device without install code, tap Add Device without Install Code.

DUG_ITRV_ELKO-00 7

Smart Radiator Thermostat

6. Turn and hold the cap in the “+” direction for a few seconds.

The middle LED blinks green.

7. In the app, select Middle LED blinking in green and tap Start configuration

(C).

Cancel

How to pair device

1. Power on the device.

8. After a few seconds, a solid green LED indicates that the device is

successfully paired to the ELKO SmartHUB.

9. After the device is added in the app, tap Done.

NOTE:

• Before you tap Done, you can select the room to assign the

Thermostats. This creates a group to control the Thermostats, refer

to Using the device, page 13.

• Refer to Changing the device location to assign a room to the

Thermostat, if you did not assign the room at Step 9.

8 DUG_ITRV_ELKO-00

Smart Radiator Thermostat

Pairing device with auto scan

Pairing the device with auto scan automatically discovers the device when the

corresponding device is powered on.

To pair the device:

NOTE: Remember to insert the batteries to power On the device.

1. On the Home page, tap +.

2. Tap Auto scan tab and tap Confirm.

3. If you have multiple hubs, do Step 4 or proceed to Step 5.

4. Tap Select hub and select the ELKO SmartHub from the slide-up menu.

5. Turn and hold the cap in the “+” direction for a few seconds.

NOTE: Please wait for a few seconds until the device search is complete.

6. Tap Next (A) and select iTRV.

Auto Scan

iTRV

Next A

7. Once the device is added successfully, tap Done.

DUG_ITRV_ELKO-00 9

Smart Radiator Thermostat

Configuring the device

Changing the device icon

You can change the device icon using the ELKO Smart app.

1. On the Home page, select the device for which you wish to change the icon.

2. At the top-right corner of the screen, tap .

3. Tap edit next to the device name.

4. Tap Icon to view the menu.

5. In the slide-up menu, select any one of the following (A) to change the device

icon:

–Take photo - allows you to click a photo from the mobile camera.

–Select from Icon Library - allows you to select an icon from the app

library.

–Select from Album - allows you to select a photo from the mobile gallery.

10 DUG_ITRV_ELKO-00

Tabla de contenidos

Otros manuales de Termostato de Elko

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario