Stelpro MAESTRO ASMT402AD Manual de usuario

- 1-- 1-

Model: ASMT402AD

INS-ASMT402AD-US-051219

SMART THERMOSTAT

USER GUIDE

- 2-- 2-

TABLE OF CONTENTS

COMPATIBILITY 3

WHAT’S IN THE BOX AND TOOLS REQUIRED 3

WARNING 4

Where to install your MAESTRO controller

•thermostat 5

Read this guide and watch the installation video 5

INSTALLING THE MAESTRO THERMOSTAT 6

1Cut off power supply 6

2Remove existing thermostat 7

3Secure the MAESTRO thermostat mounting plate 8

4Connect the wires 9

5Secure the thermostat on the mounting plate 10

6Turn power back on 11

7 Set-up basic options on rst start 12

USING THE THERMOSTAT 13

Thermostat interface 13

Navigating the advanced menus 14

Advanced menus 14

Navigating the °STELPRO menu 15

Setting the heating mode 15

Connecting a thermostat to the MAESTRO controller

•thermostat 16

With the MAESTRO app 16

Without the MAESTRO app 17

Connecting the thermostat to another Zigbee network 18

Setting the temperature setpoint 18

Displaying ambient relative humidity or outdoor temperature 19

Choosing the temperature display unit (°C or °F) 19

Locking or unlocking the keypad 19

Activating or deactivating open window detection 20

Activating or deactivated proximity detection 20

Resetting the thermostat 20

THE 360° COMFORT EXPERIENCE 21

Make the most of your MAESTRO 21

Control your comfort from wherever you are 21

Group rooms 21

Create personalized activities 21

Anticipated start 21

Geofencing: comfort follows you wherever you go 21

Track your energy consumption 21

THERMOSTAT TROUBLESHOOTING 22

Common problems 22

THERMOSTAT DEFAULT VALUES 24

TECHNICAL SPECIFICATIONS 25

Electrical data 25

Temperature display 25

Connectivity 25

Storage and operating conditions 25

WARRANTY 26

- 3-- 3-- 3-- 3-

THE 360° COMFORT EXPERIENCE

CONGRATULATIONS!

You’ve chosen to entrust the heating of your home to the MAESTRO smart thermostat. The

comfort of your family is now in your hands. Elegant, accurate and highly efcient, your new

MAESTRO smart thermostat will help you reduce your energy bill and ecological footprint,

so you can do your part for the environment.

Create your own ecosystem in your home and take full control of your comfort with the

MAESTRO mobile app.

MADE AND DESIGNED FOR NORTH AMERICA

Established in Quebec, Canada for more than 35 years, the Stelpro family business

understands the specic needs our climate imposes on us as well as our concerns regarding

safety and environmental protection.

By choosing Maestro by Stelpro, you’re encouraging the development of energy efcient

products for a better future.

- 4-- 4-

• MAESTRO thermostat

• Mounting plate

• Mounting screws (2)

• Caps (3)

• Quickstart guide

• Warning

WHAT’S IN THE BOX AND TOOLS REQUIRED

COMPATIBILITY

Your MAESTRO thermostat can control electric baseboards, convectors and fan-forced heaters.

IMPORTANT: This thermostat is not compatible with:

• Systems with inductive loads

• Central heating systems

• Systems with resistive loads that are:

o inferior to 150 W at 120 VAC / 260 W at 208 VAC / 300 W at 240 VAC

o superior to 2000 W at 120 VAC / 3400 W at 208 VAC / 4000 W at 240 VAC

See page 27 for detailed technical specications of the MAESTRO thermostat.

To install your thermostat, you will need:

• No. 2 Phillips screwdriver

The two required screws are supplied.

- 5-- 5-

Before installing and operating this thermostat, the owner and/or installer must read, understand and follow these instructions

and keep them handy for future reference. If these instructions are not followed, the warranty will be considered null and void

and the manufacturer deems no further responsibility for this product. Moreover, the following instructions must be adhered

to in order to avoid personal injuries or property damages, serious injuries and potentially fatal electric shocks. All electric

connections must be made by a qualied electrician, according to the electric and building codes effective in your region.

• Do NOT connect this product to a supply source other than 120 VAC to 240 VAC, and do not exceed the load limits

specied.

• Protect the heating system with the appropriate circuit breaker or fuse. You must regularly clean dirt accumulations on the

thermostat.

• Do NOT use uid to clean thermostat air vents.

• Do NOT install thermostat in a wet place or on an external wall. However, installing it in isolated walls is allowed. To avoid

any risk of overheating, leave a clearance of at least 12 in. around the thermostat to ensure proper ventilation.

• Also, make sure that the air vents at the bottom and top of the thermostat housing are clear of any obstruction: blocked

air vents can lead to the unit overheating and affect its operation.

NOTE: °STELPRO reserves the right to modify its product without notice to improve operability. Therefore, the instructions in

this user guide many not entirely match all the functions of your thermostat. To obtain the most recent documentation, visit

the °STELPRO website.

IMPORTANT: HIGH VOLTAGE! CUT OFF POWER BEFORE INSTALLING UNIT OR DOING ANY MAINTENANCE.

WARNING

- 6-- 6-

WHERE TO INSTALL YOUR MAESTRO CONTROLLER•THERMOSTAT?

A bit of planning will optimize Maestro’s mesh network and ensure that devices communicate well. The controller• thermostat

allows you to control the other MAESTRO thermostats in your home. Plan to install the controller in a central location. Doing

so will facilitate communication with the various rooms.

In this example, the controller could be positioned at the entrance to the living room (1) or dining room (2). The signal may

have a hard time getting to the master bathroom as the washer/dryer (3) and shower (4) could be barriers. If a MAESTRO

thermostat is placed in the master bedroom (5), it will help relay the signals between the controller and the master bathroom

thermostat. Since the controller•thermostat also serves as a thermostat, it will control the temperature of this room.

BATHROOM

BEDROOM

11’2” x 12’1”

MASTER BEDROOM

15’ x 10’10”

LIVING ROOM

13’2” x 16’

DINING ROOM

9’ x 13’1”

KITCHEN

9’10” x 8’

D-W

W/D

CLOSET

- 7-- 7-

WHERE TO INSTALL YOUR MAESTRO CONTROLLER•THERMOSTAT

Install a MAESTRO thermostat in each room where you want to control the temperature.

You must install the thermostat at approximately 5 ft. from the oor, on an indoor

wall that faces the heating system. The thermostat must be mounted on an electri-

cal box.

ATTENTION : To avoid any risk of overheating, leave a clearance of at least 12 in.

around the thermostat to ensure proper ventilation. Also, the front of the unit

should be completely clear of any obstruction to ensure optimal functionality. For

example, do not install the thermostat behind curtains or furniture.

To avoid getting false temperature measurements, do not install the thermostat in

any of the following locations:

• Near a window or close to a door leading outside

• In an area exposed directly to the light or heat of the sun, a lamp, a replace or any other heat source

• Near an air outlet

• Near concealed ducts or a chimney

• Where there is poor air ow (e.g. behind a door)

• Where there is a high concentration of dust

• Where there are frequent air drafts (e.g. top of stairs)

READ THIS GUIDE AND WATCH THE INSTALLATION VIDEO

Before you start, take a few minutes to carefully read this guide and watch the step-by-step video on installing the MAESTRO

thermostat. It will ensure safe and easy installation.

The installation video is at the bottom of this page: www.stelpro.com/en-US/maestro

- 8-- 8-

1CUT OFF POWER SUPPLY

To avoid any risk of electric shock, cut off the power supply on the lead wires from the electrical panel. Make sure the

power is off by checking, for example, that the heating system remains off even if the setpoint temperature is higher

than the ambient temperature (mechanical thermostat).

INSTALLING THE MAESTRO THERMOSTAT

INSTALLATION OF THE THERMOSTAT MUST BE DONE BY A QUALIFIED ELECTRICIAN.

IMPORTANT

- 9-- 9-

2REMOVE EXISTING THERMOSTAT

If an existing thermostat is being replaced, remove it and disconnect its wires from the heating system and power

supply.

NOTE: These instructions apply to a thermostat with a °STELPRO mounting plate.

1- Loosen the screw at the base of the thermostat, without completely removing it, to separate the thermostat from the

mounting plate.

2- Gently pull the thermostat to gain access to the wires.

3- Disconnect the thermostat wires from those of the heating system and power supply.

4- Remove the mounting plate.

- 10 -- 10 -

3SECURE THE MAESTRO THERMOSTAT MOUNTING PLATE

Secure the MAESTRO thermostat mounting plate to the electrical box using the screws supplied.

1- Loosen the screw at the base of the MAESTRO thermostat, without completely removing it, until the thermostat and the

mounting plate are no longer holding together.

2- Slide the mounting plate downward and then pull on it to separate it from the thermostat.

3- Using the mounting screws supplied (2), secure the MAESTRO thermostat mounting plate to the electrical box. Ensure

the plate is perfectly straight so that the thermostat is also straight.

4- Pass the power supply wires through the large opening at the centre of the mounting plate.

NOTE: You can position the mounting plate

either to the left, in the centre or to the right

of the electrical box, according to your needs.

(See image below).

Tabla de contenidos

Otros manuales de Termostato de Stelpro

Stelpro

Stelpro T12 Series Manual de usuario

Stelpro

Stelpro Allia ASAT402ZB Manual de usuario

Stelpro

Stelpro STE252NP+ Manual de usuario

Stelpro

Stelpro STZB402 Plus Manual de usuario

Stelpro

Stelpro STCNP Manual de usuario

Stelpro

Stelpro STE302R2+ Manual de usuario

Stelpro

Stelpro B1T1 Series Manual de usuario

Stelpro

Stelpro Maestro SMT402AD Manual de usuario

Stelpro

Stelpro True Comfort PS120/240WF Manual de usuario

Stelpro

Stelpro STCNP - 5mA Manual de usuario

Stelpro

Stelpro MAESTRO Manual de usuario

Stelpro

Stelpro Maestro SMT402 Manual de usuario

Stelpro

Stelpro STE241 Manual de usuario

Stelpro

Stelpro MAESTRO Manual de usuario

Stelpro

Stelpro MAESTRO Manual de usuario

Stelpro

Stelpro 360 comfort D070 Manual de usuario

Stelpro

Stelpro STE302NP Manual de usuario

Stelpro

Stelpro STE402NP Manual de usuario

Stelpro

Stelpro STE302PA Manual de usuario

Stelpro

Stelpro STZW402+ Manual de usuario

Stelpro

Stelpro B1T1ER Manual de operación y mantenimiento

Stelpro

Stelpro STZW402+ Manual de usuario

Stelpro

Stelpro Maestro SMC402 Manual de usuario

Stelpro

Stelpro STE302P Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Honeywell

Honeywell T6811 Manual de usuario