Elite Screens Lunette Series Manual de usuario

Rev042314 EA www.elitescreens.com 1

Lunette Series

Home Theater Curved Fixed Frame Projection Screen

User’s Guide

Important Safety and Warning Precautions

Please follow these instructions carefully to ensure proper maintenance and safety with your Lunette

Series Fixed Frame Curved Screen

1. When hanging the screen up, please make sure that no other objects –such as power switches, outlets,

furniture, ladders, windows, etc., occupy the space designated for your Fixed-Frame screen.

2. Regardless if the screen is hung on or installed into the wall, make sure that the proper mounting anchors

are used and that the weight is supported appropriately by a strong and structurally sound surfacejustas

any large and heavy picture frame should.

(Please consult a home improvement specialist for the best advice on installation.)

3. Frame parts are made of high quality velour-surfaced aluminum and should be handled with care.

4. When not in use, cover over the screen with a furniture sheet to protect it from dirt, grime, paint, or any

other impurities.

5. When cleaning, use a soft cloth moistened with warm water to remove any marks on the frame or

screen surface.

6. Never attempt to use any solutions, chemicals, or abrasive cleaners on the screen surface.

7. In order to avoid damaging the screen, avoid touching it directly with your fingers, writing

stationary, tools, or any other sharp or abrasive objects.

8. Spare parts should be placed out of reach of small children in accordance with household safety guidelines.

CAUTION:

The projection screen frame is made of high-quality aluminum alloy and should be handled with

care.

Use a soft cloth with warm water to remove any spots on the screen material surface.

To avoid damaging the screen material, never attempt to use any solutions, chemicals, or

abrasive cleaners on the screen itself, and never attempt to touch screen with your fingers or

sharps/abrasive objects.

Rev042314 EA www.elitescreens.com 2

Hardware and Parts List

L. Tension Rods

M. Screen Material

N. Vertical Upright Frame

O. Horizontal Curved Frame

A. Dry-wall anchor

B. 1.77”L-Bracket

C. 3.54”L-Bracket

D. Lower bracket

E. M5 Screw

F. Wood screw

G. Fix Plate

K. Butterfly Screw

J. Elbow Joint

H. Center Support Bar

Note: Center support bar may be packed in a plastic

tube with the screen material.

Rev042314 EA www.elitescreens.com 3

Frame Assembly

1. Insert both Elbow Joints (J) into each Horizontal Curved Frame (N) and join all four frame

parts together as shown below.

2. After making sure that all four corners join at right angles (forming a perfect rectangle),

fasten the four angles together by using x8 M5 screws (E).

3. Layout the Screen Material and Tension Rodson a clean and dry surface. Then, gently

roll out the screen material over the back of the fixed frame.

Vertical Upright Fame

Horizontal Curved Frame

Black Backing of the screen material

Minimal gap is normal here

Rev042314 EA www.elitescreens.com 4

4. Insert Tension Rods through the sleeves. The longer rods are used on the horizontal edges of the

screen material, and the shorter rods are used on the vertical edges, as seen below.

5. Slip the screen tension rods into the grooves running along the back of the frame. Clip on the

Fix Plates to the back of the frame to secure the rods into place forming a tight and flat surface.

See Attaching the Fix Plates section below for details.

Tension Rod

Viewing Surface

Fix Plate

Rev042314 EA www.elitescreens.com 5

Black backing for AcousticPro models

This procedure only applies to AcousticPro models. Disregard this section if your Fixed Frame

does not include an acoustic transparent screen material. The purpose of the black backing

material is to block out any light penetration that may reflect off of anything mounted behind

the screen, which can cause distortion to the projected image.

Fix plates secure Acoustic material and the black

backing behind it.

Fix Plate

Tension Rod (stretches the Acoustic material)

Black backing for

Acoustic material

Interval markings reveal the best points for inserting the fix plates (Fig. 1). The prongs on the fix plates insert to the lip on

the back of the frame creating a friction hold that will firmly keep the material and black backing in place (Fig. 2-3). After

the material has been installed, the backing will lie over the back of the white (Acoustic) material and then be held in place

by the Velcro on the fix plates (Fig 4).

The black backing is held in place by the Velcro that is on the fix plates.

Fig. 1

Fig. 2

Black backing

Fig. 3

Fig. 4

Rev042314 EA www.elitescreens.com 6

Attaching the Fix Plates

1. Make sure that the material and frame are both lying face down on a clean, dry, and non-

abrasive surface.

2. Center the material inside the frame.

Please note the material will be noticeably smaller than the frame, as the material must be

stretched to create a sufficient amount of tension for perfect material flatness.

3. Start attaching the Fix Plates in the corner of the frame’s horizontal edge, and then alternate

with the corners of the frame’s vertical edge as shown in diagram.

4. Attach the fix plates starting from the ends and moving towards the center as shown in the

diagram below to create an evenly tensioned surface.

Example 1 Example 2

Fix Plate Push

Fig. 6

Fig. 5

Rev042314 EA www.elitescreens.com 7

Center Support Bar

1. Center Support Bar may be packed in a plastic tube with the screen material.

Center support bar

2. Insert the Center Support Bar into the upper top groove on the back of the frame (note: this not

the same groove where the fix plate inserts) with the bottom end near the center point of the

frame, and place it in at an angle so that both ends of the bar are aligned with the groove.

3. Slide the top end of the bar into the top center point location (as shown below) to complete the

center support bar installation. This will provide added stability to the frame and added

tension to the material.

支

撑

For 165”and above models

Rev042314 EA www.elitescreens.com 8

Installation

1. Use butterfly screws to install the upper bracket as shown in diagram:

Use butterfly screws to assemble a 1.77”L-Bracket and a 3.54”L-Bracket into an upper bracket

2. Locate the height where you want to set up, and draw an upper base line. Confirm the distance

between the two brackets on the level direction following E on the diagram below. Mark the hole

location on the wall by following the base line and the upper bracket’s screw hole site, and then

drill the hole. Insert the wall anchor and tighten the upper bracket using the provided screw.

(The base line must be on the level.)

3. Draw a lower base line according to F and the upper base line, and then make a hole on the wall

according to the screw hole location for the lower bracket, then insert the anchor and tighten the

lower bracket with the provided screw.

Upper base line

Upper bracket

Wood screw

Hollow wall anchor

Wall

Upper bracket

Lower bracket

Hollow wall anchor Wood screw

Rev042314 EA www.elitescreens.com 9

4. Place the upper frame on the upper brackets, and gently pull the frame down onto the bracket.

The lower bracket will also slide into the groove of the lower frame.

5. Mounting the frame to the brackets will finish your installation.

Note: Two (2) or more people must install the frame for added safety.

Upper base line

Lower base line

Installation diagram

of frame and

bracket

Base line

Swing the bottom

bracket to the left or

right to fit it in the

groove of the lower

frame.

Otros manuales para Lunette Series

Tabla de contenidos

Otros manuales de Pantalla de proyección de Elite Screens

Elite Screens

Elite Screens Spectrum Series Manual de usuario

Elite Screens

Elite Screens Spectrum Series Manual de usuario

Elite Screens

Elite Screens Elite CineTension Series Manual de usuario

Elite Screens

Elite Screens TE100HC2 Manual

Elite Screens

Elite Screens Evanesce AcousticPro UHD Series Manual de usuario

Elite Screens

Elite Screens EDGE FREE Aeon Series Manual de usuario

Elite Screens

Elite Screens M85XWS1-SRM Manual de usuario

Elite Screens

Elite Screens CineTension B Series Guía

Elite Screens

Elite Screens Starling 2 Series Manual de usuario

Elite Screens

Elite Screens Spectrum Tab-Tension Series Manual de usuario

Elite Screens

Elite Screens Elite ES-M120UWV2 Manual de usuario

Elite Screens

Elite Screens TE100HC2 Manual de usuario

Elite Screens

Elite Screens Home100IWH2-A Manual de usuario

Elite Screens

Elite Screens Raptor Series Manual de usuario

Elite Screens

Elite Screens 100 series Manual de usuario

Elite Screens

Elite Screens Kestrel Tab-Tension 2 CLR Manual de usuario

Elite Screens

Elite Screens CineTension Series Manual de usuario

Elite Screens

Elite Screens IWB85SW2a Manual de usuario

Elite Screens

Elite Screens Kestrel Series Manual de usuario

Elite Screens

Elite Screens GolfSim Bay Series Manual de usuario

Elite Screens

Elite Screens Kestrel Series Manual de usuario

Elite Screens

Elite Screens Kestrel Series Manual de usuario

Elite Screens

Elite Screens Yard Master 2 WraithVeil Dual Series Manual de usuario

Elite Screens

Elite Screens F100XWH1 Manual de usuario

Manuales populares de Pantalla de proyección de otras marcas

FART PRODUKT

FART PRODUKT Standard SCREEN Manual de usuario

Draper

Draper E Series Manual

Laarhoven

Laarhoven Companion II Manual de usuario

Renogy

Renogy RMS-LFPS-US Manual de usuario

Da-Lite

Da-Lite ExecutiveElectrol Manual de usuario

Samsung

Samsung S*H65* Manual de usuario

FONESTAR

FONESTAR PPTR-43100-FA Manual de usuario

Slide Clear

Slide Clear Varro XL Manual de usuario

OS РХ-090Н Manual de usuario

Niko

Niko 10-845 Manual de usuario

Speaka Professional

Speaka Professional 2357532 Manual de funcionamiento

Sima

Sima XL-72 Manual de usuario

Jasic

Jasic EVO 2.0 ET-200P Manual de usuario

InFocus

InFocus SC-WALL GRY-92H Manual

Barco

Barco OverView MVL-615 Manual de usuario

Draper

Draper Envoy Manual

SI Dynamic 2 XL Manual de usuario

Draper

Draper Nocturne+ E Instrucciones de instalación