Elite Screens CineTension B Series Guía

Rev. 03/28/17 1 www.elitescreens.com

Limit switch adjustment instructions for CineTension B Series

NOTE: Elite Screens does not recommend making unnecessary adjustments to the screen, as improper

adjustments will damage the unit and may void your warranty.

For safety reasons, never disassemble the limit switch.

The upper and lower limit switches are located in the right end of the screen housing when facing the screen.

Please refer to the fig. below to locate the upper and lower limit switches.

NOTE: When turning the limit switches, bear in mind that a full‐circle turn in either direction will create a one

inch adjustment.

A. If you over adjust the rise position, the screen will attempt to go further into the case and cause it jitter

and bounce.

B. If you over adjust the drop position, the screen will begin to reverse itself back up.

C. Reversing the adjustments should bring the screen back to normal operation

White = DROP

Yellow = RISE

The white limit switch is

accessed where the screen is

deployed.

The yellow limit switch can only

be accessed through the hole

located at the bottom right end

of the screen.

Rev. 03/28/17 2 www.elitescreens.com

How to adjust the Retract (rise) position:

If the screen does not retract completely, use the following steps.

1. Press the UP button on the remote first to retract the screen as much as possible.

2. Use the Allen‐wrench to turn the RISE (yellow) switch counter‐clockwise. When you turn the RISE

switch, the screen will retract correspondingly.

3. Stop rotating the switch once the weight bar is inside and in‐line with the opening.

Warning: If you continue to rotate the switch once the weight bar is in‐line with the opening, the screen

will attempt to retract further inside and causing permanent damage to the screen. DO NOT over turn the

switch.

4. If the screen retracts too far in, press the DOWN button on the remote to expose the limit switches.

Rotate the RISE adjustment switch 1‐2 turns clockwise. Then press the UP button on the remote to

see the new retract position.

How to adjust the Drop (top black masking border) position:

Note: All electric screens come with standard top black masking and they cannot be dropped further.

DO NOT use these instructions to try to get more out of your standard black masking drop. Use these

instructions only if you have decreased the amount of your black masking and need to increase it back.

If you need to decrease the amount of the top black masking, use the following steps.

1. Press the DOWN button on the remote first to fully deploy the screen.

2. Use the Allen‐wrench to turn the DROP (white) switch clockwise. When you turn the DROP

adjustment switch, the screen will raise.

3. Stop turning the switch once the screen reaches the desired position.

Warning: If you over‐turn the switch, the screen will raise too high, which may permanently damage the

product.

4. If the screen rises too high, simply turn the DROP adjustment switch counter‐clockwise. Press the

UP button on the remote first and then press DOWN to see the new drop position.

For more information, technical support or your local Elite Screens contact, please visit

www.elitescreens.com

Tabla de contenidos

Otros manuales de Pantalla de proyección de Elite Screens

Elite Screens

Elite Screens Manual Tab-Tension 2 Series Manual de usuario

Elite Screens

Elite Screens WhiteBoardScreen Series Manual de usuario

Elite Screens

Elite Screens Spectrum Tab-Tension Series Manual de usuario

Elite Screens

Elite Screens Insta-DEM Screen Series Manual de usuario

Elite Screens

Elite Screens ezFrame CineGrey 5D Manual de usuario

Elite Screens

Elite Screens Lunette Series Manual de usuario

Elite Screens

Elite Screens Kestrel Series Manual de usuario

Elite Screens

Elite Screens ezFrame Series Manual de usuario

Elite Screens

Elite Screens CineTension 3 Series Manual de usuario

Elite Screens

Elite Screens Lunette Series Manual de usuario

Elite Screens

Elite Screens SILVERMAX106H2 Manual de usuario

Elite Screens

Elite Screens Elite CineTension Series Manual de usuario

Elite Screens

Elite Screens Saker Tab-Tension Series Manual de usuario

Elite Screens

Elite Screens Electric100H Manual de usuario

Elite Screens

Elite Screens CineTension 2 Dual Series Manual de usuario

Elite Screens

Elite Screens Elite Silvermax Series Manual de usuario

Elite Screens

Elite Screens Evanesce Tension B Series Manual de usuario

Elite Screens

Elite Screens Edge Frame Manual de usuario

Elite Screens

Elite Screens Aeon CLR 3 Series Manual de usuario

Elite Screens

Elite Screens aeonclr series Manual de usuario

Elite Screens

Elite Screens Evanesce AcousticPro UHD Series Manual de usuario

Elite Screens

Elite Screens YARD MASTER MANUAL SERIES Manual de usuario

Elite Screens

Elite Screens Evanesce B Series Manual de usuario

Elite Screens

Elite Screens Manual Series Manual de usuario

Manuales populares de Pantalla de proyección de otras marcas

FART PRODUKT

FART PRODUKT Standard SCREEN Manual de usuario

Draper

Draper E Series Manual

Laarhoven

Laarhoven Companion II Manual de usuario

Renogy

Renogy RMS-LFPS-US Manual de usuario

Da-Lite

Da-Lite ExecutiveElectrol Manual de usuario

Samsung

Samsung S*H65* Manual de usuario

FONESTAR

FONESTAR PPTR-43100-FA Manual de usuario

Slide Clear

Slide Clear Varro XL Manual de usuario

OS РХ-090Н Manual de usuario

Niko

Niko 10-845 Manual de usuario

Speaka Professional

Speaka Professional 2357532 Manual de funcionamiento

Sima

Sima XL-72 Manual de usuario

Jasic

Jasic EVO 2.0 ET-200P Manual de usuario

InFocus

InFocus SC-WALL GRY-92H Manual

Barco

Barco OverView MVL-615 Manual de usuario

Draper

Draper Envoy Manual

SI Dynamic 2 XL Manual de usuario

Draper

Draper Nocturne+ E Instrucciones de instalación