Danfoss Living connect Manual de usuario

Danfoss Heating Solutions VIIDH102 11/2013

Installation and User Guide

living connect®

Electronic Radiator Thermostat

11/2013 VIIDH102 Danfoss Heating Solutions

Installation Guide

1. Installation

1.1 Identify your living connect® thermostat............................................. 4

1.2 In the package ..................................................................... 4

1.3 Overview of valve adapters ......................................................... 5

1.4 Installing the right adapter ......................................................... 6

1.5 Inserting the batteries.............................................................. 7

1.6 Using the buttons .................................................................. 7

1.7 Installing living connect® ............................................................ 8

1.8 Automatic adjustments............................................................. 8

1.9 Removing living connect® ........................................................... 9

1.10 Resetting living connect® to default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.11 Removing an adapter from living connect® ......................................... 10

2. Technical specications................................................................. 11

Pay a visit to the living web-site, where you nd a lot of additional information:

animations and videos, a FAQ section, literature and much, much more

living.danfoss.eu

Scan this QR code with your smartphone and go directly

to the living connect® Installation video on YouTube.

Installation Guide living connect®

Danfoss Heating Solutions VIIDH102 11/2013

User Guide living connect®

User Guide

3. Overview of display and control buttons ............................................... 12

4. Connecting living connect® to a Danfoss Link™ system

4.1 Conguring rooms in Danfoss Link™ CC ............................................ 12

4.2 Connecting living connect® to Danfoss Link™ CC .................................... 12

4.3 Testing the connection ............................................................ 14

5. Additional settings

5.1 Adjustments for over/undersized radiators......................................... 14

5.2 Open-window function............................................................ 15

5.3 Automatic valve exercising ........................................................ 15

6. Safety precautions...................................................................... 15

7. Disposal ................................................................................ 15

11/2013 VIIDH102 Danfoss Heating Solutions

1. Installation

1.1 Identify your living connect® thermostat

LIVING CONNECT

INTELLIGENT RADIATOR THERMOSTAT

DANFOSS RA CONNECTION5702420110257

014G0001

living connect®comes in several versions to meet the demands of

dierent markets.

You identify your version by the code number on the box label.

Adapters for a range of dierent valves types are available as acces-

sories, see chapter 1.3.

Code no. Version characteristics Quick guide languages

014G0001 Incl. pre-mounted RA adapter UK, DE, DK, NL, FR, PL, SE, FI

014G0002 Incl. RA + M30 x 1.5 adapters UK, DE, DK, NL, FR, PL, SE, FI

014G0003 Incl. RA + M30 x 1.5 adapters UK, CZ, SK, RU, TR, HU, HR, SI

1.2 In the package

living connect® 014G0001 is supplied with a pre-mounted adapter for Danfoss RA valves, two

alkaline AA batteries, a 2 mm Allen key and a Quick Guide in languages English, German, Danish,

Dutch, French, Polish, Swedish and Finnish.

living eco®

Quick Start Guide

MAKING MODERN LIVING POSSIBLE

Danfoss Heating Solutions

living connect® sensor Alkaline AA batteries Allen key, 2 mm Quick Guide and “Hanger”

living connect® 014G0002 and 014G0003 are supplied with adapters for Danfoss RA valves and

valves with M30 x 1.5 (K) connections, two alkaline AA batteries, a 2 mm Allen key and a Quick

Guide in English, German, Danish, Dutch, French, Polish, Swedish and Finnish (014G0002) or in

English, Czech, Slovak, Russian, Turkish, Hungarian Croatian and Slovenian (014G0003).

living eco®

Quick Start Guide

MAKING MODERN LIVING POSSIBLE

Danfoss Heating Solutions

living connect®

sensor

Adapter for

RA valves

Adapter for

M30 x 1.5 (K) valves

Alkaline

AA batteries Allen key, 2 mm Quick Guide and

“Hanger”

Installation Guide living connect®

Danfoss Heating Solutions VIIDH102 11/2013

1.3 Overview of valve adapters

Adapters for a wide range of dierent valve types are available as accessories.

Adapter type Code no. Adapter Valve

For Danfoss

RA valves 014G0251

For M30 x 1.5 (K)

valves 014G0252

For Danfoss

RAV valves

014G0250

For Danfoss

RAVL valves

For Danfoss

RTD valves 014G0253

For M28 valves:

- MMA 014G0255

- Herz 014G0256

- Orkli 014G0257

- COMAP 014G0258

Installation Guide living connect®

11/2013 VIIDH102 Danfoss Heating Solutions

1.4 Installing the right adapter

Adapter for RA valves (pre-mounted on 014G0001)

1. 2.

Place the RA adapter on the valve as shown. Tighten the adapter with the 2 mm Allen key.

Adapter for M30 x 1.5 (K) valves

1. 2.

Place the K adapter on the valve as shown. Hand-tighten the K adapter (max. 5 Nm).

Adapter for RAV valves (accessory)

1. 2.

Click the inner adapter on the valve. Hand-tighten the outer adapter (max. 5 Nm).

Adapter for RAVL valves (accessory)

1. 2.

Click the inner adapter on the valve. Hand-tighten the outer adapter (max. 5 Nm).

Installation Guide living connect®

Danfoss Heating Solutions VIIDH102 11/2013

Adapter for RTD valves (accessory)

1. 2.

Place the RTD adapter on the valve as shown. Hand-tighten the RTD adapter (max. 5 Nm).

Adapters for M28 valves (accessories)

Please follow the instructions supplied with the valve adapter for the specific M28 valve.

1.5 Inserting the batteries

Remove the battery cover and insert two AA batteries. Make sure the

batteries are correctly oriented.

Rechargeable batteries must not be used.

When replacing batteries the programme settings will be preserved,

but after two minutes the settings for time and date are reset.

The low battery symbol is displayed approx. one month before the

batteries run out.

After approx. two weeks the symbol will ash 14 times from 19:00

to 21:00 hrs.

Before the batteries run out living connect®will leave the valve in a

slightly open position to protect the valve from damage.

1.6 Using the buttons

living connect®has two arrow buttons which allow you to navigate

the display and the menus and to set the temperature*.

The dot button is used to select and conrm.

If the display is o, press either button to activate the display.

*The temperature is usually controlled via Danfoss Link™ CC, but may be

changed at any time using the thermostat’s buttons. If this is done, the

thermostat sends a message to Danfoss Link™ CC, instructing it to synchro-

nise the other thermostats in the same room.

Installation Guide living connect®

11/2013 VIIDH102 Danfoss Heating Solutions

1.7 Installing living connect®

1. 2.

living connect®must be in Installation Mode

to be xed correctly onto the valve. This is

indicated by a large, ashing Min the display.

Installation Mode can be selected by pressing

for 3 seconds until Mis displayed, then

release and press again.

Screw living connect®onto the adapter and

tighten by hand (max. 5 Nm).

While slightly pressing forward, turn living

connect®clockwise untill it locks, then tighten.

3. 4.

Press to fix living connect®. Icons for Network Connection and Alarm are

flashing, indicating living connect® is ready for

connection with Danfoss Link™ CC.

1.8 Automatic adjustments

During the rst night of operation living connect® will shut o the radiator heat and then open

again to detect the exact opening point of the valve. This will allow living connect® to control the

heat as eciently as possible. If necessary, the procedure is repeated once a night for up to a week.

You might experience the valve being warm during the adjustment procedure, regardless of the

room temperature.

Intelligent Control (Forecast)

During the first week of operation living connect®learns when it is necessary to start heating the

room in order to reach the correct temperature at the correct time.

The intelligent control will continuously adjust the heating time compared to seasonal tempera-

ture changes.

Using Saving Program requires that your heating system has enough heat for a short period during

heat up. If your experience problems you should contact your installer.

Installation Guide living connect®

Danfoss Heating Solutions VIIDH102 11/2013

1.9 Removing living connect®

1. 2.

Activate Installation Mode: Press for 3

seconds to select the Function Menu.

Select Mwith . When Mflashes, press .

A large Mis flashing in the display to indicate

that Installation Mode is activated.

3. 4.

Remove the battery cover and the batteries. Insert the Allen key or similar into the hole to

lock the adapter ring. Turn counterclockwise

to unscrew living connect®from the adapter.

1.10 Resetting living connect® to default settings

1. 2.

Remove the battery cover and take out one

battery.

Press and hold for approx. 5 seconds, while

reinserting the battery.

Installation Guide living connect®

11/2013 VIIDH102 Danfoss Heating Solutions

1.11 Removing an adapter from living connect®

1. 2.

Remove the battery cover. Insert a small hex key or similar into the locking

hole to lock the adapter ring.

3. 4.

With the hex key locking the adapter ring,

turn the adapter in the shown direction.

Put back the battery cover. Mount living con-

nect® on another valve adapter according to

the instructions supplied with the adapter.

Installation Guide living connect®

Otros manuales para living connect

Tabla de contenidos

Otros manuales de Termostato de Danfoss

Danfoss

Danfoss RET1001M Manual de usuario

Danfoss

Danfoss ECtemp Smart Manual de usuario

Danfoss

Danfoss 3020P Instrucciones de montaje

Danfoss

Danfoss HC6000 Manual de usuario

Danfoss

Danfoss RAVV-RAV8 Manual de usuario

Danfoss

Danfoss TP75H Manual de funcionamiento

Danfoss

Danfoss Icon Master Manual de usuario

Danfoss

Danfoss 103E5 Manual de usuario

Danfoss

Danfoss RT 103 Manual de usuario

Danfoss

Danfoss Devireg 535 Instrucciones de uso

Danfoss

Danfoss RET2000B-RF Manual de usuario

Danfoss

Danfoss TP4000 Range Manual de usuario

Danfoss

Danfoss GreenCon RC-T2 Manual de usuario

Danfoss

Danfoss TP7001 series Manual de usuario

Danfoss

Danfoss BasicPlus2 Manual de usuario

Danfoss

Danfoss ECtemp 316 Manual de usuario

Danfoss

Danfoss 140F1143 Manual de usuario

Danfoss

Danfoss REP24CO3 Manual de usuario

Danfoss

Danfoss FP735Si Manual de usuario

Danfoss

Danfoss DEVIreg 233 Manual de usuario

Danfoss

Danfoss RET MD Guía de solución de problemas

Danfoss

Danfoss ECtemp 550 Manual de usuario

Danfoss

Danfoss TP5001 series Manual de usuario

Danfoss

Danfoss TP9000 Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario

Danfoss living connect Manual de usuario

Manuales populares de Termostato de otras marcas