Danfoss Devireg 535 Instrucciones de uso

Setting up your Devireg 535 programmable thermostat with

your devimat system

Devireg 535

Selection of sensor type

Power on the thermostat

With the front oﬀ, with

a small screwdriver

or pencil press the

installation button.

Select the ﬂoor sensor

To change the default setting, press

land use the arrow buttons  to

select your choices. Press lto accept

your choice.

Press for the next setting.

Maximum ﬂoor temperature.

- Tiles on timber based ﬂoor = 29°C

- Tiles on concrete based ﬂoor = 40°C

- Timber covered ﬂoors = 27°C

(parquet etc. - Please check with

ﬂoor supplier).

To change this setting, press land

use the arrow buttons  to select

your choice. Press lto accept your

choice.

Press for the next setting.

Scale

When selecting Celsius, the display

will show the actual temperature at

the ﬂoor sensor.

To change this setting, press land

use the arrow buttons  to select

your choice.

Press lto accept your choice.

The installation procedure is now ﬁnished.

You can use the  for going back or forward through

the settings, otherwise:

Press the installation pinhole to exit

installation mode.

Put the frame and front back on.

You enter the settings by pressing the

pinhole with a small screw driver,

pencil, the display now changes from

temperature to time display.

By pressing the l, the hours starts

ﬂashing - you can now change them

with the .

Press the lagain to change the

minutes with the .

To ﬁnish, press lthen 

Setting the time

Setting the weekday

Mon Tue Wed Thu Fri Sat Sun

By pressing the l, the weekday starts

ﬂashing - you can now change them

with the .

Press the lto accept.

To ﬁnish press 

Setting the timer periods

The ﬁrst period bar ﬂashes

indicating this is the morning period.

By pressing the l, the start time of

the period starts ﬂashing. You can

change it with the arrow buttons

 in increments of 15 minutes.

Press the lto accept.

The second (day), third (evening) and

fourth (night) period bars are set as

mentioned above.

Setting the comfort temperature

By pressing the l, the preset comfort

temperature starts ﬂashing.

You can change it with the arrow

buttons 

Press lto accept, then press 

Setting the set back temperature

(second and fourth period)

By pressing the l, the preset comfort

temperature starts ﬂashing, normally

this is set to OFF.

You can change it with the arrow

buttons 

Press lto accept.

Then press the pinhole with a

small screwdriver or pencil.

Changing timer program

To change the program:

Keep the lbutton pressed for 2

seconds.

The actual program starts to flash.

It is now possible to change the

program by using the buttons 

Press the lto accept.

P1 - Manual mode

On constantly 24 hours 7 days a week

at set temperature.

Set temperature - twice a day.

Set temperature all day.

Set temperature Monday - Friday

twice a day.

Saturday - Sunday all day.

Part no.: 001v01 28.06.10

Otros manuales de Termostato de Danfoss

Danfoss

Danfoss TP7000M Manual de usuario

Danfoss

Danfoss TP4000 Range Manual de usuario

Danfoss

Danfoss ECtemp Next Plus HW Manual de usuario

Danfoss

Danfoss Icon Master Manual de usuario

Danfoss

Danfoss Link DBR Manual de usuario

Danfoss

Danfoss TPONE-RF Manual de usuario

Danfoss

Danfoss ECL Comfort 210 Manual de usuario

Danfoss

Danfoss Icon Wireless Dial Manual de usuario

Danfoss

Danfoss SET 3E Manual de usuario

Danfoss

Danfoss RET 230LS Manual de usuario

Danfoss

Danfoss RTW-RA Manual de usuario

Danfoss

Danfoss TP9 Manual de usuario

Danfoss

Danfoss LX205T Manual de usuario

Danfoss

Danfoss CFZ Manual de usuario

Danfoss

Danfoss HCT-3 Manual de usuario

Danfoss

Danfoss FH-WT Manual de usuario

Danfoss

Danfoss BasicPlus2 WT-D Manual de usuario

Danfoss

Danfoss RET1000 MD Manual de usuario

Danfoss

Danfoss EFET 160 Manual de usuario

Danfoss

Danfoss MTD Instrucciones de montaje

Danfoss

Danfoss ECtemp 316 Manual de usuario

Danfoss

Danfoss REP24CO1 Manual de usuario

Danfoss

Danfoss RT 14E Manual de usuario

Danfoss

Danfoss 088L5130 Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Honeywell

Honeywell CM721 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

Honeywell

Honeywell RLV4305 Manual de usuario

Honeywell

Honeywell Prestige 2.0 THX9421 Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario