D-Link DCH-G020 Guía de instalación y uso

Otros manuales para DCH-G020

2

Tabla de contenidos

Otros manuales de Cambiar de D-Link

D-Link

D-Link DGS-3100 SERIES Manual de usuario

D-Link

D-Link DES-3250TG Manual de usuario

D-Link

D-Link DGS-3312SR Manual de usuario

D-Link

D-Link DGS-8010 Manual de usuario

D-Link

D-Link DGS-1210-28P/FL Manual de usuario

D-Link

D-Link DGS-1026MP Manual de usuario

D-Link

D-Link DGS-3212SR Manual de usuario

D-Link

D-Link DGS-2000 Series Manual de usuario

D-Link

D-Link DES-1008P Manual de usuario

D-Link

D-Link DGS-3000 series Manual de usuario

D-Link

D-Link DKVM-222 Manual de usuario

D-Link

D-Link DGS-1008G Manual de usuario

D-Link

D-Link xStack DGS-3400 Series Manual de usuario

D-Link

D-Link DGS-1250 Series Manual de usuario

D-Link

D-Link DES-1200M Manual de usuario

D-Link

D-Link DU-H7 Manual de usuario

D-Link

D-Link TM DES-6500 Manual de usuario

D-Link

D-Link DUB-H410 Manual de usuario

D-Link

D-Link DES-108 Manual de usuario

D-Link

D-Link xStack Manual de usuario

D-Link

D-Link DIS-100G-5SW Manual de usuario

D-Link

D-Link EasySmart DGS-1100-08PLV2 Manual de usuario

D-Link

D-Link DES-3226L Manual de instalación

D-Link

D-Link DUB-H4 - Hub - USB Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT

BT Mini Hub Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manual de usuario

Dear customer,

To restore the DCH-G020 proceed as follows

In Case the LED is flashing red

-----------------------------------------

Manual update process for the DCH-G020:

-----------------------------------------

Log in to the web interface of the DCH-G020 (http: //ip_of _the_DCH-G020) the password is the pin

on the bottom of the device.

Please upload the following firmware (unzip the file and upload only the bin file)

ftp://ftp.dlink.de/dch/dch-g020/archive/driver_software/DCH-G020_fw_reva_123b02_beta.zip

After the update, reset the DCH-G020 twice to 1. Activate the new firmware and 2. Reset the Z-Wave

controller. Please wait between the reset until the device is powered up again

After that log in to the web interface of the DCH-G020 again and upload the latest firmware.

ftp://ftp.dlink.de/dch/dch-g020/driver_software/DCH-G020_fw_reva_125b10_ALL_en_20160805.zip

The DCH-G020 should be running again with a green LED.

Please add the DCH-G020 to your mydlink Account.

-----------------------------------------

In Case the LED is constantly red

-----------------------------------------

Recoveryupdate for the DCH-G020:

-----------------------------------------

Download the following firmware (unzip first and upload only the bin file)

ftp://ftp.dlink.de/dch/dch-g020/archive/driver_software/DCH-G020_fw_reva_123b02_beta.zip

1. Connect your pc with a cable to your router

2. Change the IP address of your LAN port to 192.168.0.123

3. Unplug the DCH-G020 and press the Reset button while you plug it back in. Hold the Reset

button until the LED is flashing red.

4. Open http://192.168.0.60 in a Webbrowser

5. Upload the firmware 1.23b02_beta

After the Upload the LED should be green again.

If the LED is still red, the DCH-G020 is defective please issue a RMA.

If the LED is green, please change your LAN port ipv4 settings back to DHCP and reset the DCH-G020.

After the reset log in to the web interface of the DCH-G020 (http: //ip_of _the_DCH-G020) the

password is the pin on the bottom of the device.

Upload the latest firmware

ftp://ftp.dlink.de/dch/dch-g020/driver_software/DCH-G020_fw_reva_125b10_ALL_en_20160805.zip

Please add the DCH-G020 to your mydlink Account.

-----------------------------------------

-----------------------------------------

If you have Z-Wave devices connected to the DCH-G020 before the issue you have to do the

following for every Z-Wave device

-------------------------------------

Reset the Z-Wave Device

-------------------------------------

For every Z-Wave Device:

1. Press the connect button on the DCH-G020

(LED flashing orange)

2. Press the black pin on the back of the device four times in two seconds.

3. And hold the pin at the four times until the device pulse red down.

The device will start flashing slowly red for the next two minutes; you have now two minutes to

reconnect the device with the DCH-G020 through the APP